SIST EN ISO 13849-1:2008/AC:2009

Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2006/Cor 1:2009)

ISO - Taking over of an ISO Technical Corrigendum

Sicherheit von Maschinen - Sicherheitsbezogene Teile von Steuerungen - Teil 1: Allgemeine Gestaltungsleitsätze (ISO 13849-1:2006/Cor 1:2009)

Sécurité des machines - Parties des systèmes de commande relatives à la sécurité - Partie 1: Principes généraux de conception (ISO 13849-1:2006/Cor 1:2009)

Varnost strojev - Z varnostjo povezani deli krmilnih sistemov - 1. del: Splošna načela za načrtovanje (ISO 13849-1:2006/Cor 1:2009)

General Information

Status: Withdrawn
Publication Date: 03-May-2009
Withdrawal Date: 06-Jan-2016

ICS: 13.110 - Safety of machinery

Technical Committee: VSN - Safety of machinery

Current Stage: 9900 - Withdrawal (Adopted Project)
Start Date: 07-Jan-2016
Due Date: 30-Jan-2016
Completion Date: 07-Jan-2016

Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
Directive: 98/37/EC - Machinery

Mandate: M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery

Ref Project: EN ISO 13849-1:2008/AC:2009 - Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2006/Cor 1:2009)

Relations

Replaced By: SIST EN ISO 13849-1:2016 - Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
Effective Date: 01-Mar-2016

Corrects: SIST EN ISO 13849-1:2008 - Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2006)
Effective Date: 08-Jun-2022

SIST EN ISO 13849-1:2008/AC:2009 - Page 1 preview

SIST EN ISO 13849-1:2008/AC:2009 - Page 2 preview

SIST EN ISO 13849-1:2008/AC:2009 - Page 3 preview

Corrigendum

English language

4 pages

Preview

e-Library read for

AI-Chat

1 day

Create e-Library subscription and get permanent access to the document. Subscriptions are available for: 13 13.110

Frequently Asked Questions

What is SIST EN ISO 13849-1:2008/AC:2009?

SIST EN ISO 13849-1:2008/AC:2009 is a corrigendum published by the Slovenian Institute for Standardization (SIST). Its full title is "Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2006/Cor 1:2009)". This standard covers: ISO - Taking over of an ISO Technical Corrigendum

What is the scope of SIST EN ISO 13849-1:2008/AC:2009?

ISO - Taking over of an ISO Technical Corrigendum

What ICS categories does SIST EN ISO 13849-1:2008/AC:2009 belong to?

SIST EN ISO 13849-1:2008/AC:2009 is classified under the following ICS (International Classification for Standards) categories: 13.110 - Safety of machinery. The ICS classification helps identify the subject area and facilitates finding related standards.

What standards are related to SIST EN ISO 13849-1:2008/AC:2009?

SIST EN ISO 13849-1:2008/AC:2009 has the following relationships with other standards: It is inter standard links to SIST EN ISO 13849-1:2016, SIST EN ISO 13849-1:2008. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

Is SIST EN ISO 13849-1:2008/AC:2009 a harmonized European standard?

SIST EN ISO 13849-1:2008/AC:2009 is associated with the following European legislation: EU Directives/Regulations: 2006/42/EC, 98/37/EC; Standardization Mandates: M/079, M/396. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.

How can I purchase SIST EN ISO 13849-1:2008/AC:2009?

You can purchase SIST EN ISO 13849-1:2008/AC:2009 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.

Standards Content (Sample)

SIST EN ISO 13849-1:2008/AC:20...

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Sicherheit von Maschinen - Sicherheitsbezogene Teile von Steuerungen - Teil 1: Allgemeine Gestaltungsleitsätze (ISO 13849-1:2006/Cor 1:2009)Sécurité des machines - Parties des systèmes de commande relatives à la sécurité - Partie 1: Principes généraux de conception (ISO 13849-1:2006/Cor 1:2009)Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2006/Cor 1:2009)13.110Varnost strojevSafety of machineryICS:Ta slovenski standard je istoveten z:EN ISO 13849-1:2008/AC:2009SIST EN ISO 13849-1:2008/AC:2009en,fr01-junij-2009SIST EN ISO 13849-1:2008/AC:2009SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 13849-1:2008/ACMarch 2009Mars 2009März 2009ICS 13.110English versionVersion FrançaiseDeutsche FassungSafety of machinery - Safety-related parts of control systems - Part 1:General principles for design (ISO 13849-1:2006/Cor 1:2009)Sécurité des machines - Parties dessystèmes de commande relatives à lasécurité - Partie 1: Principes généraux deconception (ISO 13849-1:2006/Cor 1:2009)Sicherheit von Maschinen -Sicherheitsbezogene Teile vonSteuerungen - Teil 1: AllgemeineGestaltungsleitsätze (ISO 13849-1:2006/Cor 1:2009)This corrigendum becomes effective on 25 March 2009 for incorporation in the three official languageversions of the EN.Ce corrigendum prendra effet le 25 mars 2009 pour incorporation dans les trois versions linguistiquesofficielles de la EN.Die Berichtigung tritt am 25.März 2009 zur Einarbeitung in die drei offiziellen Sprachfassungen derEN in Kraft.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre:
Avenue Marnix 17,
B-1000 Brussels© 2009 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...

SIST

SIST EN ISO 19085-13:2026(Main)

Woodworking machines - Safety - Part 13: Multi-blade rip sawing machines with manual loading and/or unloading (ISO 19085-13:2025)

EN ISO 19085-13:2025

This document specifies the safety requirements and measures for multi-blade rip sawing machines with manual loading or unloading or both, capable of continuous production use, hereinafter referred to also as “machines”, designed to cut solid wood and materials with similar physical characteristics to wood.
This document deals with all significant hazards, hazardous situations and events as listed in Annex A, relevant to the machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Transport, assembly, dismantling, disabling and scrapping phases are also taken into account.
This document does not deal with specific hazards related to the combination of single machines with any other machine as part of a line.
This document is not applicable to machines:
— intended for use in potentially explosive atmosphere;
— manufactured prior to its publication.

Standard
59 pages
English language
e-Library read for
AI-Chat
1 day

12-Feb-2023
16-Dec-2025
13.110
25.080.60
79.120.10
2006/42/EC
M/396
VSN

SIST

SIST EN ISO 14119:2025(Main)

Safety of machinery - Interlocking devices associated with guards - Principles for design and selection (ISO 14119:2025)

EN ISO 14119:2025

This document specifies principles for the design and selection (independent of the nature of the energy source) of interlocking devices associated with guards and provides guidance on measures to minimize the possibility of defeat of interlocking devices in a reasonably foreseeable manner.
This document covers principles for the design, selection and application of the following:
—     parts of the guards which actuate interlocking devices;
—     trapped key interlocking devices and systems for machinery applications.
NOTE            ISO 14120 specifies general requirements for the design and construction of guards provided primarily to protect persons from mechanical hazards. The processing of the signal from the interlocking device to stop the machine and prevent unexpected start up is covered in ISO 14118, ISO 13849-1 and IEC 62061.

Standard
119 pages
English language
e-Library read for
AI-Chat
1 day

21-Mar-2021
11-Jun-2025
13.110
2006/42/EC
M/396
VSN

SIST

SIST EN ISO 13855:2025(Main)

Safety of machinery - Positioning of safeguards with respect to the approach of the human body (ISO 13855:2024)

EN ISO 13855:2024

This document specifies requirements for the positioning and dimensioning of safeguards with respect to the approach of the human body or its parts towards hazard(s) within the intended span-of-control as follows:
—     the position and dimension of the detection zone(s) of ESPE and pressure-sensitive mats and pressure-sensitive floors;
—     the position of two-hand control devices and single control devices;
—     the position of interlocking guards.
This document also specifies requirements for the positioning of safety-related manual control devices (SRMCD) with respect to the approach of the human body or its parts from within the safeguard space relative to:
—     the position and dimension of the detection zone(s) of ESPE and pressure-sensitive mats and pressure-sensitive floors; and
—     the position and dimension of interlocking guards.
When evaluating the ability of the human body or its parts to access SRMCD from within the intended safeguarded space, the requirements of this document are also applicable to determine the dimensions of safeguard(s). Approaches such as running, jumping or falling, are not considered in this document.
NOTE 1        The values for approach speeds (walking speed and upper limb movement) in this document are time tested and proven in practical experience.
NOTE 2        Other types of approach can result in approach speeds that are higher or lower than those defined in this document.
This document applies to safeguards used on machinery for the protection of persons 14 years and older.
Safeguards considered in this document include:
a)       electro-sensitive protective equipment (ESPE) such as:
—    active opto-electronic protective devices (AOPDs) (see IEC 61496-2);
—    AOPDs responsive to diffuse reflection that have one or more detection zone(s) specified in two dimensions (AOPDDRs-2D) (see IEC 61496-3);
—    AOPDs responsive to diffuse reflection that have one or more detection zone(s) specified in three dimensions (AOPDDRs-3D) (see IEC 61496-3);
—    vision based protective devices using reference pattern techniques (VBPDPP) (see IEC/TS 61496-4-2);
—    vision based protective devices using stereo vision techniques (VBPDST) (see IEC/TS 61496-4-3);
b)       pressure-sensitive mats and pressure-sensitive floors (see ISO 13856-1);
c)        two-hand control devices (see ISO 13851);
d)       single control devices;
e)       interlocking guards (see ISO 14120).
This document is not applicable to:
—     safeguards (e.g. pendant two-hand control devices) that can be manually moved, without using tools, nearer to the hazard zone than the separation distance;
—     protection against the risks from hazards arising from emissions (e.g. the ejection of solid or fluid materials, radiation, electric arcs, heat, noise, fumes, gases);
—     protection against the risks arising from failure of mechanical parts of the machine or gravity falls.
The separation distances derived from this document do not apply to safeguards used solely for presence sensing function.

Standard
85 pages
English language
e-Library read for
AI-Chat
1 day

29-Apr-2022
17-Mar-2025
13.110
13.180
2006/42/EC
M/396
VSN

SIST

SIST EN ISO 19085-12:2025(Main)

Woodworking machines - Safety - Part 12: Tenoning/profiling machines (ISO 19085-12:2024)

EN ISO 19085-12:2024

This document specifies the safety requirements and measures for manually loaded and unloaded
—     single-end tenoning machines with a manual feed sliding table,
—     single-end tenoning machines with a mechanical feed sliding table,
—     single-end tenoning-profiling machines with mechanical feed,
—     double-end tenoning-profiling machines with mechanical feed, also designed to be automatically either loaded or unloaded, or both, and
—     angular systems for tenoning and profiling with mechanical feed
with maximum workpiece height capacity of 200 mm for single-end machines and 500 mm for double-end machines, capable of continuous production use, altogether referred to as “machines”.
This document deals with all significant hazards, hazardous situations and events as listed in Annex A, relevant to machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also, transport, assembly, dismantling, disabling and scrapping phases have been taken into account.
The machines are designed to process in one pass one end or two sides, either opposite or perpendicular to each other, of workpieces made of
a)       solid wood, and
b)       materials with similar physical characteristics to wood (see ISO 19085-1:2021, 3.2); and
c)        only the machines with mechanical feed, made of
d)       fibre-cement,
e)       rock wool and glass wool,
f)         gypsum,
g)       plasterboard,
h)       matrix engineered mineral boards, silicate boards and sulfate boards,
i)         composite materials with core consisting of polyurethane or mineral material laminated with light alloy,
j)         polymer-matrix composite materials and reinforced thermoplastic, thermoset and elastomeric materials,
k)       aluminium light alloy profiles, and
l)         composite boards made from the materials listed above.
This document is also applicable to machines fitted with one or more of the following devices or additional working units, whose hazards have been dealt with:
—     sanding units;
—     fixed or movable workpiece support;
—     automatic tool changing;
—     automatic workpiece returner;
—     glass bead saw unit;
—     hinge recessing unit;
—     boring unit;
—     dynamic processing unit;
—     sawing unit installed out of the integral enclosure, between machine halves in double-end machines;
—     foiling unit;
—     coating unit;
—     grooving unit with a milling tool installed out of the integral enclosure, between machine halves;
—     brushing unit;
—     gluing unit;
—     sealing unit;
—     dowels inserting unit;
—     tongues inserting unit;
—     inkjet marking unit;
—     laser marking unit;
—     labelling unit;
—     workpiece back-up device (device that is either anti-chipping or anti-splintering, or both);
—     quick tool changing system;
—     post-formed edge pre-cutting unit;
—     additional workpiece support (at either infeed or outfeed, or both);
—     parallel infeed device on single-end machines;
—     transversal infeed device on single-end machines;
—     intermediate workpiece support on double-end machines;
—     automatic infeed device;
—     feed chain with dogs.
This document does not deal with any hazards related to:
a)       systems for automatic loading and unloading of the workpiece to a single machine other than automatic workpiece returner;
b)       single machine being used in combination with any other machine (as part

Standard
76 pages
English language
e-Library read for
AI-Chat
1 day

27-Feb-2023
17-Mar-2025
13.110
79.120.10
2006/42/EC
M/396
VSN

SIST

SIST EN ISO 19085-9:2025(Main)

Woodworking machines - Safety - Part 9: Circular saw benches (with and without sliding table) (ISO 19085-9:2024)

EN ISO 19085-9:2024

This document specifies the safety requirements and measures for circular saw benches with or without sliding table or demountable power feed unit or both and capable of continuous production use, also known as “table saws” (in the USA), hereinafter referred to also as “machines”.
The machines are designed to cut solid wood and material with similar physical characteristics to wood (see ISO 19085-1:2021, 3.2).
This document deals with all significant hazards, hazardous situations and events as listed in Annex A relevant to the machines when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer; reasonably foreseeable misuse has been considered too. Transport, assembly, dismantling, disabling and scrapping phases have also been taken into account.
This document is also applicable to machines fitted with one or more of the following devices or working units, whose hazards have been dealt with:
—     device for the main saw blade and scoring saw blade to be raised and lowered through the table;
—     device to tilt the main saw blade and scoring saw blade for angled cutting;
—     device for scoring;
—     device for grooving with milling tool with a width not exceeding 20 mm in one pass;
—     demountable power feed unit;
—     additional manually operated sliding table;
—     powered workpiece clamping device.
This document does not apply to:
a)       machines intended for outdoor use on building sites;
NOTE            Building site saws (contractor saws) are covered by the requirements of ISO 19085-10:2018.
b)       handheld woodworking machines including any adaptation permitting their use in a different mode, i.e. bench mounting;
c)        machines intended for use in a potentially explosive atmosphere;
d)       machines manufactured prior to the publication of this document.

Standard
55 pages
English language
e-Library read for
AI-Chat
1 day

11-Sep-2022
10-Dec-2024
13.110
25.080.60
79.120.10
2006/42/EC
M/396
VSN

SIST

SIST EN ISO 19085-4:2025(Main)

Woodworking machines - Safety - Part 4: Vertical panel circular sawing machines (ISO 19085-4:2024)

EN ISO 19085-4:2024

This document specifies the safety requirements and measures for manually loaded and unloaded vertical panel circular sawing machines (defined in 3.1) capable of continuous production use, with hand feed or integrated feed, hereinafter referred to also as “machines”.
This document deals with all significant hazards, hazardous situations and events, as listed in Annex A, relevant to the machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer, including reasonably foreseeable misuse. Transport, assembly, dismantling, disabling and scrapping phases are also taken into account.
This document is also applicable to machines fitted with one or more of the following devices/additional working units, whose hazards have been dealt with:
—     an integrated feed device;
—     a device for scoring;
—     an angle cutting device;
—     a middle support device;
—     programmable end stops for parallel vertical cuts;
—     a device for grooving with a milling tool with a cutting width not exceeding 27 mm;
—     a panel pusher;
—     a panel lowering device;
—     stop devices for workpiece during horizontal cuts.
The machines are designed for cutting panels consisting of:
a)       solid wood;
b)       material with similar physical characteristics to wood (see ISO 19085-1:2021, 3.2);
c)        composite materials with core consisting, for example, of polyurethane or mineral material laminated with light alloy;
d)       polymer-matrix composite materials and reinforced thermoplastic/thermoset/elastomeric materials;
e)       gypsum boards, gypsum bounded fibreboards;
f)         honeycomb aluminium boards;
g)       matrix engineered mineral boards, silicate boards;
h)       aluminium light alloy plates;
i)         composite boards made from the materials listed above.
This document does not apply to machines
—     with pressure beam and saw unit mounted behind the workpiece support,
—     where the guide rails on which the saw unit moves vertically are fixed on the machine frame and the horizontal cut can only be made by manually feeding the panel,
—     designed to cut in vertical direction only,
—     automatically performing two or more cutting cycles in sequence,
—     intended for use in potentially explosive atmosphere, and
—     manufactured prior to the publication of this document.

Standard
44 pages
English language
e-Library read for
AI-Chat
1 day

19-Sep-2021
10-Dec-2024
13.110
25.080.60
79.120.10
2006/42/EC
M/396
VSN

SIST

SIST EN ISO 19085-7:2025(Main)

Woodworking machines - Safety - Part 7: Surface planing, thickness planing, combined surface/thickness planing machines (ISO 19085-7:2024)

EN ISO 19085-7:2024

This document specifies the safety requirements and measures for
—     surface planing machines, also called jointers,
—     thickness planing machines, also called planers or single surface planers, and
—     combined surface/thickness planing machines
with fixed cutter block position, with an integrated feed in thickness planing mode, with or without demountable power feed device in planing mode, with manual loading and/or unloading of the workpiece, and capable of continuous production use, altogether referred to as “machines”.
The machines are designed to cut solid wood and material with similar physical characteristics to wood (see ISO 19085-1:2021, 3.2).
This document deals with all significant hazards, hazardous situations and events as listed in Annex A relevant to the machines when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer. Reasonably foreseeable misuse has been considered too. Transport, assembly, dismantling, disabling and scrapping phases have also been taken into account.
This document is also applicable to surface planing machines and combined surface/thickness planing machines fitted with an optional mortising device, whose hazards have been dealt with.
This document does not apply to:
a)       machines with more than one cutter block;
b)       machines with a mortising unit driven by a separate motor;
c)        machines where the cutter block is adjustable for depth of cut setting in thickness planing mode;
d)       machines where the conversion from planing to thickness planing mode or vice versa is achieved by mounting or demounting parts/units;
e)       machines where surface planing and thickness planing can be performed at the same time;
f)         machines intended for use in potentially explosive atmosphere;
g)       machines manufactured prior to the publication of this document.

Standard
59 pages
English language
e-Library read for
AI-Chat
1 day

04-Sep-2022
10-Dec-2024
13.110
25.080.25
79.120.10
2006/42/EC
M/396
VSN

SIST

SIST EN ISO 19085-8:2025(Main)

Woodworking machines - Safety - Part 8: Belt sanding and calibrating machines for straight workpieces (ISO 19085-8:2024)

EN ISO 19085-8:2024

This document specifies the safety requirements and measures for wide belt sanding machines (defined in 3.1) and for surface treating machines (defined in 3.2) capable of continuous production use, altogether referred to as “machines”.
This document deals with all significant hazards, hazardous situations and events, as listed in Annex A, relevant to the machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer, including reasonably foreseeable misuse. Transport, assembly, dismantling, disabling and scrapping phases are also taken into account.
This document is also applicable to machines fitted with one or more of the following devices/additional working units, whose hazards have been dealt with:
—     transversal sanding unit;
—     cleaning brushing unit;
—     satining roller unit;
—     disk brushing unit;
—     texturing brushing roller unit;
—     texturing brushing belt unit;
—     cutterblock unit;
—     texturing band saw unit;
—     spiked roller unit;
—     multi blade unit;
—     conveyor directly controlled by the machine;
—     additional workpiece vacuum clamping device;
—     antistatic bar unit.
NOTE 1        An antistatic bar is a device that eliminates electrostatic charges on the workpiece to ease its subsequent cleaning from dust by airflow.
This document is also applicable to machines fitted with a laser engraving unit, but the specific hazards of this unit have not been dealt with.
The machines are designed to process workpieces with flat surface and even thickness, in shape of panels or beams or frames, consisting of:
a)       solid wood;
b)       material with similar physical characteristics to wood (see ISO 19085-1:2021, 3.2);
c)        gypsum boards, gypsum bounded fibreboards;
d)       composite materials with core consisting of, e.g. polyurethane or mineral material;
e)       composite boards made from the materials listed above;
f)         all materials listed above, already lacquered.
This document does not deal with hazards related to:
—     specific devices other than those listed above;
—     access through in-feed and out-feed openings of machines with a work piece height capacity greater than 700 mm;
—     systems for powered loading or unloading, or both, of the workpiece to or from a single machine;
NOTE 2        Loading the machine manually includes manually placing the workpiece onto a conveyor directly controlled by the machine. Unloading the machine manually includes manually removing the workpiece from a conveyor directly controlled by the machine.
—     out-feed workpieces on machines with feed speed higher than 60 m/min;
—     interfacing of the machine with any other machine.
This document is not applicable to machines intended for use in a potentially explosive atmosphere and to machines manufactured prior to the date of its publication.

Standard
44 pages
English language
e-Library read for
AI-Chat
1 day

19-Sep-2021
10-Dec-2024
13.110
25.080.50
79.120.10
2006/42/EC
M/396
VSN

SIST

SIST EN ISO 19085-5:2025(Main)

Woodworking machines - Safety - Part 5: Dimension saws (ISO 19085-5:2024)

EN ISO 19085-5:2024

This document specifies the safety requirements and measures for dimension saws (defined in 3.1), capable of continuous production use and hereinafter referred to also as “machines”.
The machines are designed to cut solid wood and material with similar physical characteristics to wood.
This document deals with all significant hazards, hazardous situations and events, listed in Annex A, relevant to the machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer; reasonably foreseeable misuse has been considered too. Transport, assembly, dismantling, disabling and scrapping phases have also been taken into account.
This document is also applicable to machines fitted with one or more of the following devices/additional working units, whose hazards have been dealt with:
a)       device to raise and lower the main saw blade and scoring saw blade;
b)       device to tilt the main saw blade and scoring saw blade for angled cutting in one or both directions;
c)        device for scoring;
d)       device for grooving with milling tool with a width not exceeding 20 mm;
e)       demountable power feed unit;
f)         power-operated sliding table;
g)       workpiece clamping.
This document is not applicable to machines intended for use in potentially explosive atmospheres or to machines manufactured prior to the date of its publication.

Standard
62 pages
English language
e-Library read for
AI-Chat
1 day

14-Sep-2021
10-Dec-2024
13.110
25.080.60
79.120.10
2006/42/EC
M/396
VSN

SIST

SIST EN ISO 19085-11:2025(Main)

Woodworking machines - Safety - Part 11: Combined machines (ISO 19085-11:2024)

EN ISO 19085-11:2024

This document specifies the safety requirements and measures for combined woodworking machines (defined in 3.1), capable of continuous production use, with manual loading and unloading of the workpiece and hereinafter referred to also as “machines”.
The machines are designed to cut solid wood and material with similar physical characteristics to wood (see ISO 19085-1:2021, 3.2).
This document deals with all significant hazards, hazardous situations and events, listed in Annex A, relevant to the machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer; reasonably foreseeable misuse has been considered too. Transport, assembly, dismantling, disabling and scrapping phases have also been taken into account.
This document applies to machines also equipped with the devices or additional working units listed in the Scopes of ISO 19085-5:2024, ISO 19085-6:2024, ISO 19085-7:2024 and ISO 19085-9:2024.
This document does not apply to:
a)       machines incorporating a planing unit and a mortising device only;
NOTE            Machines incorporating a planing unit and a mortising device only are dealt with in ISO 19085-7:2024.
b)       combined machines incorporating a band saw unit;
c)        machines with a mortising unit with a separate drive other than the planing unit drive;
d)       machines intended for use in potentially explosive atmosphere;
e)       machines manufactured before the publication of this document.

Standard
39 pages
English language
e-Library read for
AI-Chat
1 day

11-Sep-2022
10-Dec-2024
13.110
79.120.10
2006/42/EC
M/396
VSN

Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2006/Cor 1:2009)

Sicherheit von Maschinen - Sicherheitsbezogene Teile von Steuerungen - Teil 1: Allgemeine Gestaltungsleitsätze (ISO 13849-1:2006/Cor 1:2009)

Sécurité des machines - Parties des systèmes de commande relatives à la sécurité - Partie 1: Principes généraux de conception (ISO 13849-1:2006/Cor 1:2009)

Varnost strojev - Z varnostjo povezani deli krmilnih sistemov - 1. del: Splošna načela za načrtovanje (ISO 13849-1:2006/Cor 1:2009)

General Information

Relations