SIST EN ISO 3838:2004/A1:2024

SLOVENSKI STANDARD
01-februar-2024
Surova nafta in tekoči ali trdni naftni proizvodi - Določanje gostote ali relativne
gostote - Metoda s piknometrom s kapilarnim zamaškom in metoda z graduiranim
bikapilarnim piknometrom - Dopolnilo A1 (ISO 3838:2004/Amd 1:2023)
Crude petroleum and liquid or solid petroleum products - Determination of density or
relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer
methods - Amendment 1 (ISO 3838:2004/Amd 1:2023)
Rohöl und flüssige oder feste Mineralölerzeugnisse - Bestimmung der Dichte oder der
relativen Dichte - Verfahren mittels Pyknometer mit Kapillarstopfen und Bikapillar-
Pyknometer mit Skale - Änderung 1 (ISO 3838:2004/Amd 1:2023)
Pétrole brut et produits pétroliers liquides ou solides - Détermination de la masse
volumique ou de la densité - Méthodes du pycnomètre à bouchon capillaire et du
pycnomètre bicapillaire gradué - Amendement 1 (ISO 3838:2004/Amd 1:2023)
Ta slovenski standard je istoveten z: EN ISO 3838:2004/A1:2023
ICS:
75.040 Surova nafta Crude petroleum
75.080 Naftni proizvodi na splošno Petroleum products in
general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 3838:2004/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2023
EUROPÄISCHE NORM
ICS 75.080
English Version
Crude petroleum and liquid or solid petroleum products -
Determination of density or relative density - Capillary-
stoppered pyknometer and graduated bicapillary
pyknometer methods - Amendment 1 (ISO
3838:2004/Amd 1:2023)
Pétrole brut et produits pétroliers liquides ou solides - Rohöl und flüssige oder feste Mineralölerzeugnisse -
Détermination de la masse volumique ou de la densité - Bestimmung der Dichte oder der relativen Dichte -
Méthodes du pycnomètre à bouchon capillaire et du Verfahren mittels Pyknometer mit Kapillarstopfen und
pycnomètre bicapillaire gradué - Amendement 1 (ISO Bikapillar-Pyknometer mit Skale - Änderung 1 (ISO
3838:2004/Amd 1:2023) 3838:2004/Amd 1:2023)
This amendment A1 modifies the European Standard EN ISO 3838:2004; it was approved by CEN on 15 October 2023.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3838:2004/A1:2023 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 3838:2004/A1:2023) has been prepared by Technical Committee ISO/TC 28
"Petroleum and related products, fuels and lubricants from natural or synthetic sources" in
collaboration with Technical Committee CEN/TC 19 “Gaseous and liquid fuels, lubricants and related
products of petroleum, synthetic and biological origin” the secretariat of which is held by NEN.
This Amendment to the European Standard EN ISO 3838:2004 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by June 2024, and
conflicting national standards shall be withdrawn at the latest by June 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia
...