SIST EN 15651-1:2010

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Tesnilne mase za nekonstrukcijske stike v stavbah in na sprehajalnih površinah - 1. del: Tesnilne mase za fasadeFugendichtstoffe für nicht tragende Anwendungen in Gebäuden und Fußgängerwegen - Teil 1: Fugendichtstoffe für FassadenelementeMastics pour joints dans la construction immobilière - Définitions, exigences et évaluation de la conformité - Partie 1: Mastics pour façadesSealants for non-structural use in joints in buildings and pedestrian walkways - Part 1: Sealants for facade elements91.100.50Veziva. Tesnilni materialiBinders. Sealing materials91.060.10Stene. Predelne stene. FasadeWalls. Partitions. FacadesICS:Ta slovenski standard je istoveten z:EN 15651-1:2010SIST EN 15651-1:2010en,de01-maj-2010SIST EN 15651-1:2010SLOVENSKI
STANDARD



SIST EN 15651-1:2010



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15651-1
March 2010 ICS 91.100.50 English Version
Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 1: Sealants for facade elements
Mastics pour joints dans la construction immobilière - Définitions, exigences et évaluation de la conformité - Partie 1: Mastics pour façades
Fugendichtstoffe für nicht tragende Anwendungen in Gebäuden und Fußgängerwegen - Teil 1: Fugendichtstoffe für Fassadenelemente This European Standard was approved by CEN on 29 January 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15651-1:2010: ESIST EN 15651-1:2010



EN 15651-1:2010 (E) 2 Contents Page Foreword .31Scope .42Normative references .43Terms and definitions .54Requirements .54.1Identification requirements and test methods .54.1.1Short description of the sealant .54.1.2Thermogravimetric test .64.1.3Specific gravity .64.1.4Indentation hardness (Shore hardness) .64.2Conditioning, test procedure and substrates .64.3Performance requirements and test methods for non-structural sealants for facade elements .74.3.1General .74.3.2Sealants for facade elements used in cold climates .84.3.3Resistance to flow .94.4Performance requirements for non-structural sealants for facade elements for interior application only .94.5Reaction to fire .94.5.1General .94.5.2Mounting and fixing conditions for test samples .95Durability . 106Sampling . 107Evaluation of conformity . 107.1General . 107.2Initial type testing . 107.3Factory production control . 118Marking and labelling . 11Annex A (informative)
Example on the frequency of tests for factory production control . 12 SIST EN 15651-1:2010



EN 15651-1:2010 (E) 3 Foreword This document (EN 15651-1:2010) has been prepared by Technical Committee CEN/TC 349 “Sealants for joints in building construction”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2010, and conflicting national standards shall be withdrawn at the latest by September 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document includes an informative Annex A dealing with factory production control. This document is one of the product European Standards within the framework series of EN 15651 on Sealants for non-structural use in joints in buildings and pedestrian walkways, as follows:  Part 1: Sealants for facade elements (this document),  Part 2: Sealants for glazing,  Part 3: Sealants for sanitary joints,  Part 4: Sealants for pedestrian walkways,  Part 5: Evaluation of conformity and marking. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 15651-1:2010



EN 15651-1:2010 (E) 4 1 Scope This European Standard specifies definitions and requirements for non-structural facade sealants intended for sealing exterior wall joints, window and door perimeter joints in building construction, including the interior face. NOTE Provisions on evaluation of conformity (i.e. Initial Type Testing and Factory Production Control) and marking of these products are given in EN 15651-5. This European Standard does not apply to non-structural sealants in any of non-paste form, to those used in internal walls and/or partitions and to oil-based mastics.
2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 13238, Reaction to fire tests for building products  Conditioning procedures and general rules for selection of substrates EN 13501-1, Fire classification of construction products and building elements  Part 1: Classification using data from reaction to fire tests EN 13823, Reaction to fire tests for building products  Building products excluding floorings exposed to the thermal attack by a single burning item EN 15651-5, Sealants for non-structural use in joints in buildings and pedestrian walkways  Part 5: Evaluation of conformity and marking EN 26927:1990, Building construction  Jointing products  Sealants  Vocabulary (ISO 6927:1981) EN ISO 868, Plastics and ebonite  Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003) EN ISO 1183-1, Plastics  Methods for determining the density of non-cellular plastics  Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2004) EN ISO 7389, Building construction  Jointing products  Determination of elastic recovery of sealants (ISO 7389:2002) EN ISO 7390, Building construction  Jointing products 
Determination of resistance to flow of sealants (ISO 7390:2003) EN ISO 8339, Building construction  Sealants  Determination of tensile properties (Extension to break) (ISO 8339:2005) EN ISO 8340, Building construction  Sealants  Determination of tensile properties at maintained extension (ISO 8340:2005) EN ISO 9046, Building construction  Jointing products  Determination of adhesion/cohesion properties of sealants at constant temperature (ISO 9046:2002) EN ISO 9047, Building construction  Jointing products  Determination of adhesion/cohesion properties of sealants at variable temperatures (ISO 9047:2001) SIST EN 15651-1:2010



EN 15651-1:2010 (E) 5 EN ISO 10563, Building construction  Sealants  Determination of change in mass and volume
(ISO 10563:2005) EN ISO 10590, Building construction  Sealants  Determination of tensile properties of sealants at maintained extension after immersion in water (ISO 10590:2005) EN ISO 10591, Building construction  Sealants  Determination of adhesion/cohesion properties of sealants after immersion in water (ISO 10591:2005) EN ISO 11358, Plastics  Thermogravimetry (TG) of polymers  General principles (ISO 11358:1997) EN ISO 11600, Building construction  Jointing products  Classification and requirements for sealants
(ISO 11600:2002) EN ISO 11925-2, Reaction to fire tests  Ignitability of building products subjected to direct impingement of flame  Part 2: Single-flame source test (ISO 11925-2:2002) ISO 13640, Building construction  Jointing products  Specifications for test substrates 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 26927:1990 and the following apply. 3.1 non-reactive sealant mainly physical drying mechanism, without significant change in the molecular weight of the main polymer 3.2 reactive sealant mainly curing by chemical reaction, with significant increase of the molecular weight of the main polymer 3.3 cure irreversible transformation of a sealant from a liquid or paste like state into a hardened or rubber like solid state
3.4 uncured / wet state of a sealant prior to the above transformation 4 Requirements 4.1 Identification requirements and test methods 4.1.1 Short description of the sealant The short description of the non-structural sealant for facade elements shall include brand name, type (general chemical family), opaque or translucent, waterborne or solvent based or solvent free, reactive or
non-reactive, and one or multi-component (e.g. waterborne acrylic opaque and one component, etc.). The primer shall be stated for the substrate concerned, if relevant (name, chemical typ
...