SIST EN ISO 18134-2:2017
(Main)Solid biofuels - Determination of moisture content - Oven dry method - Part 2: Total moisture - Simplified method (ISO 18134-2:2017)
Solid biofuels - Determination of moisture content - Oven dry method - Part 2: Total moisture - Simplified method (ISO 18134-2:2017)
This document describes the method of determining the total moisture content of a test sample of solid
biofuels by drying in an oven and is used when the highest precision is not needed, e.g. for routine
production control on site. The method described in ISO 18134 (all parts) is applicable to all solid
biofuels. The moisture content of solid biofuels (as received) is always reported based on the total mass
of the test sample (wet basis).
Biogene Festbrennstoffe - Bestimmung des Wassergehaltes - Ofentrocknung - Teil 2: Gesamtgehalt an Wasser - Vereinfachtes Verfahren (ISO 18134-2:2017)
Dieser Teil von ISO 18134 legt das Verfahren zur Bestimmung des Gesamtgehaltes an Wasser einer Versuchsprobe von biogenen Festbrennstoffen durch Trocknen in einem Ofen fest und darf angewendet werden, wenn nicht die höchste Präzision erforderlich ist, z. B. zur routinemäßigen Produktionskontrolle im Betrieb. Das in ISO 18134 (alle Teile) festgelegte Verfahren gilt für alle biogenen Festbrennstoffe. Der Wassergehalt von biogenen Festbrennstoffen (im Anlieferungszustand) wird immer bezogen auf die Gesamtmasse der Versuchsprobe (Bezugsbasis Feuchtmasse) angegeben.
ANMERKUNG Der Begriff Wassergehalt kann bei der Anwendung im Zusammenhang mit Biomasse-Materialien irreführend sein, weil unbehandelte Biomasse oft unterschiedliche Mengen an flüchtigen Verbindungen (Extraktstoffen) enthält, die bei der Bestimmung des Wassergehaltes durch Ofentrocknung verdampfen können (siehe Literatur¬hinweise [2], [4]).
Biocombustibles solides - Dosage de la teneur en humidité - Méthode de séchage à l'étuve - Partie 2: Humidité totale - Méthode simplifiée (ISO 18134-2:2017)
ISO 18134-2:2017 décrit la méthode de détermination de la teneur en humidité totale d'un échantillon pour essai de biocombustibles solides par séchage à l'étuve. Cette méthode est utilisée lorsque la fidélité maximale n'est pas nécessaire, par exemple, pour un contrôle de routine de la production in situ. La méthode décrite dans l'ISO 18134 (toutes les parties) est applicable à l'ensemble des biocombustibles solides. La teneur en humidité des biocombustibles solides (à réception) est toujours rapportée à la masse totale de l'échantillon pour essai (base humide).
Trdna biogoriva - Določevanje vlage - Metoda sušenja v peči - 2. del: Celotna vlaga - Poenostavljena metoda (ISO 18134-2:2017)
Ta dokument opisuje metodo določevanja celotne vsebnosti vlage v preskusnem vzorcu trdnih biogoriv s sušenjem v peči in se uporablja, kadar pri določevanju vsebnosti vlage ni potrebna najvišja raven natančnosti (npr. pri rutinski kontroli proizvodnje na mestu uporabe). Metoda, opisana v standardu ISO 18134 (vsi deli), se uporablja za vsa trdna biogoriva. Navedena vsebnost vlage v trdnih biogorivih (pri dobavi) vedno temelji na skupni masi preskusnega vzorca (mokra osnova).
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 18134-2:2017
01-april-2017
1DGRPHãþD
SIST EN ISO 18134-2:2015
7UGQDELRJRULYD'RORþHYDQMHYODJH0HWRGDVXãHQMDYSHþLGHO&HORWQDYODJD
3RHQRVWDYOMHQDPHWRGD,62
Solid biofuels - Determination of moisture content - Oven dry method - Part 2: Total
moisture - Simplified method (ISO 18134-2:2017)
Biogene Festbrennstoffe - Bestimmung des Wassergehaltes - Ofentrocknung - Teil 2:
Gesamtgehalt an Wasser - Vereinfachtes Verfahren (ISO 18134-2:2017)
Biocombustibles solides - Dosage de la teneur en humidité - Méthode de séchage à
l'étuve - Partie 2: Humidité totale - Méthode simplifiée (ISO 18134-2:2017)
Ta slovenski standard je istoveten z: EN ISO 18134-2:2017
ICS:
75.160.40 Biogoriva Biofuels
SIST EN ISO 18134-2:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 18134-2:2017
---------------------- Page: 2 ----------------------
SIST EN ISO 18134-2:2017
EN ISO 18134-2
EUROPEAN STANDARD
NORME EUROPÉENNE
February 2017
EUROPÄISCHE NORM
ICS 27.190; 75.160.40 Supersedes EN ISO 18134-2:2015
English Version
Solid biofuels - Determination of moisture content - Oven
dry method - Part 2: Total moisture - Simplified method
(ISO 18134-2:2017)
Biocombustibles solides - Dosage de la teneur en Biogene Festbrennstoffe - Bestimmung des
humidité - Méthode de séchage à l'étuve - Partie 2: Wassergehaltes - Ofentrocknung - Teil 2: Gesamtgehalt
Humidité totale - Méthode simplifiée (ISO 18134- an Wasser - Vereinfachtes Verfahren (ISO 18134-
2:2017) 2:2017)
This European Standard was approved by CEN on 1 February 2017.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 18134-2:2017 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 18134-2:2017
EN ISO 18134-2:2017 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 18134-2:2017
EN ISO 18134-2:2017 (E)
European foreword
This document (EN ISO 18134-2:2017) has been prepared by Technical Committee ISO/TC 238 "Solid
biofuels" in collaboration with Technical Committee CEN/TC 335 “Solid biofuels” the secretariat of
which is held by SIS.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by August 2017, and conflicting national standards shall
be withdrawn at the latest by August 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN ISO 18134-2:2015.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 18134-2:2017 has been approved by CEN as EN ISO 18134-2:2017 without any
modification.
3
...
SLOVENSKI STANDARD
oSIST prEN ISO 18134-2:2016
01-oktober-2016
7UGQDELRJRULYD'RORþHYDQMHYODJH0HWRGDVXãHQMDYSHþLGHO&HORWQDYODJD
3RHQRVWDYOMHQDPHWRGD,62)',6
Solid biofuels - Determination of moisture content - Oven dry method - Part 2: Total
moisture - Simplified method (ISO/FDIS 18134-2:2016)
Biocombustibles solides - Dosage de la teneur en humidité - Méthode de séchage à
l'étuve - Partie 2: Humidité totale - Méthode simplifiée (ISO/FDIS 18134-2:2016)
Ta slovenski standard je istoveten z: prEN ISO 18134-2
ICS:
75.160.40 Biogoriva Biofuels
oSIST prEN ISO 18134-2:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 18134-2:2016
---------------------- Page: 2 ----------------------
oSIST prEN ISO 18134-2:2016
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 18134-2
ISO/TC 238
Solid biofuels — Determination
Secretariat: SIS
of moisture content — Oven dry
Voting begins on:
2016-08-26 method —
Voting terminates
Part 2:
on: 2016-11-18
Total moisture — Simplified method
Biocombustibles solides — Dosage de la teneur en humidité —
Méthode de séchage à l’étuve —
Partie 2: Humidité totale — Méthode simplifiée
ISO/CEN PARALLEL PROCESSING
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 18134-2:2016(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
©
NATIONAL REGULATIONS. ISO 2016
---------------------- Page: 3 ----------------------
oSIST prEN ISO 18134-2:2016
ISO/FDIS 18134-2:2016(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2016 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 18134-2:2016
ISO/FDIS 18134-2:2016(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Apparatus . 2
6 Sample preparation . 2
6.1 Sample reduction . 2
6.2 Drying of test portion . 2
6.3 Size of test portion . 2
7 Procedure.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.