SIST EN 4165-003:2016
(Main)Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 003: Modules series 2 and series 3 - Product standard
Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 003: Modules series 2 and series 3 - Product standard
This European standard specifies the characteristics of module in the family of modular connector coupled by central threaded coupling, or rack and panel or push-pull latching mechanism. For contacts and fillers plug associated see EN 4165-002.
Luft- und Raumfahrt - Elektrischer Rechtecksteckverbinder in modularer Bauweise - Betriebstemperatur 175 °C konstant - Teil 003: Modul Serie 2 und Serie 3 - Produktnorm
Diese Europäische Norm legt die Eigenschaften von Modulen aus der Familie der Steckverbindungen in modularer Bauweise fest, die durch eine Zentralgewindekupplung, einen Einschub und Gehäusesteck-verbinder oder einen Druck Zug Verriegelungsmechanismus gekuppelt sind. Für die dazugehörigen Kon-takte und Blindstopfen siehe EN 4165 002.
Série aérospatiale - Connecteurs électriques rectangulaires modulaires - Température d'utilisation 175 °C continu - Partie 003: Modules série 2 et série 3 - Norme de produit
La présente Norme européenne spécifie les caractéristiques des modules dans la famille des connecteurs modulaires à accouplement par vis centrale, ou à rack ou avec mécanisme poussoir à loquet. Pour les contacts et les obturateurs associés, voir l’EN 4165 002.
Aeronavtika - Konektorji, električni, pravokotni, modularni - Stalna delovna temperatura 175 °C - 003. del: Moduli serije 2 in serije 3 - Standard za proizvod
Ta evropski standard določa značilnosti modula v družini modularnih konektorjev,
priključenih s centralnim navojnim priključkom ali fiksnim priključkom ali z zaklepnim mehanizmom, ki ga je treba potisniti in povleči. Za povezane kontakte in polnilni vtič glej standard EN 4165-002.
General Information
- Status
- Published
- Publication Date
- 12-May-2016
- Technical Committee
- I13 - Imaginarni 13
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 08-Apr-2016
- Due Date
- 13-Jun-2016
- Completion Date
- 13-May-2016
Relations
- Effective Date
- 01-Jun-2016
Overview
EN 4165-003:2016 is a CEN (ASD-STAN) product standard for aerospace electrical rectangular modular connectors rated for an operating temperature of 175 °C continuous. It specifies the physical and product characteristics of modules (series 2 and series 3) used in modular connector systems coupled by central threaded coupling, rack-and-panel, or push–pull latching mechanisms. EN 4165-003:2016 complements the technical specification and performance/contact arrangements given in EN 4165-001 and EN 4165-002.
Key topics and technical requirements
- Scope and applicability
- Defines module-level characteristics within the EN 4165 modular connector family for aerospace use.
- Interface dimensions
- Detailed male and female module interface dimensions are provided for standard module sizes (series 2 and series 3, including sizes 22, 20, 16, 12 and size 08 grommet designs).
- Module types
- Male, female and blank module definitions, plus maximum mass limits for blank modules (normal and lightweight versions).
- Sealing and grommets
- Grommet and sealing sleeve details; peripheral sealing and fuel-resistance options (multiple types) are specified to support environmental sealing and fuel resistance requirements.
- Polarization and coding
- Standard and alternative polarization positions (N, A, B, C, D, E, F) and polarization key placement to prevent mis-mating.
- Designation and marking
- Product designation format (example identity block) and mandatory marking: identity block, manufacture date (year–week), and manufacturer name/trademark.
- Reference to contact details
- Cross-references to contact and filler product standards (see EN 4165-002 and the EN 3155 series for contact types and deliveries).
Practical applications and users
Who uses EN 4165-003:2016?
- Aerospace connector manufacturers specifying module form factors and product labeling.
- Aircraft system designers and electrical engineers selecting modular connector modules for harnesses and equipment interfaces.
- Procurement and quality assurance teams verifying supplier conformity and part designation.
- Maintenance, repair and overhaul (MRO) organizations ensuring correct module replacements and sealed variants for fuel/environmental resistance.
- Certification authorities and test labs referencing standardized module dimensions and markings.
Why it matters:
- Ensures mechanical and interface compatibility across suppliers.
- Reduces risk of mis-mating through standardized polarization and coding.
- Supports high-temperature aerospace applications with consistent sealing and fuel-resistance options.
Related standards
- EN 4165-001 - Technical specification for the modular connector family
- EN 4165-002 - Performance and contact arrangements (contacts and fillers)
- EN 3155 series - Product standards for electrical contacts used in EN 4165 modules
Keywords: EN 4165-003:2016, modular connectors, aerospace connectors, rectangular electrical connectors, operating temperature 175 °C, module series 2, module series 3, connector polarization, grommet sealing, EN 4165.
Frequently Asked Questions
SIST EN 4165-003:2016 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 003: Modules series 2 and series 3 - Product standard". This standard covers: This European standard specifies the characteristics of module in the family of modular connector coupled by central threaded coupling, or rack and panel or push-pull latching mechanism. For contacts and fillers plug associated see EN 4165-002.
This European standard specifies the characteristics of module in the family of modular connector coupled by central threaded coupling, or rack and panel or push-pull latching mechanism. For contacts and fillers plug associated see EN 4165-002.
SIST EN 4165-003:2016 is classified under the following ICS (International Classification for Standards) categories: 31.220.10 - Plug-and-socket devices. Connectors; 49.060 - Aerospace electric equipment and systems. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 4165-003:2016 has the following relationships with other standards: It is inter standard links to SIST EN 4165-003:2008. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 4165-003:2016 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Elektrischer Rechtecksteckverbinder in modularer Bauweise - Betriebstemperatur 175 °C konstant - Teil 003: Modul Serie 2 und Serie 3 - ProduktnormSérie aérospatiale - Connecteurs électriques rectangulaires modulaires - Température d'utilisation 175 °C continu - Partie 003: Modules série 2 et série 3 - Norme de produitAerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 003: Modules series 2 and series 3 - Product standard49.060Aerospace electric equipment and systems31.220.10Plug-and-socket devices. ConnectorsICS:Ta slovenski standard je istoveten z:EN 4165-003:2016SIST EN 4165-003:2016en,fr,de01-junij-2016SIST EN 4165-003:2016SLOVENSKI
STANDARDSIST EN 4165-003:20081DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4165-003
March
t r s x ICS
v {ä r x r Supersedes EN
v s x wæ r r uã t r r zEnglish Version
Aerospace series æ Connectorsá electricalá rectangulará modular æ Operating temperature
s y w
¹C continuous æ Part
r r uã Modules series
t and series
u æ Product standard Série aérospatiale æ Connecteurs électriques rectangulaires modulaires æ Température d 5utilisation
s y w
¹C continu æ Partie
r r u ã Modules série
t et série
u æ Norme de produit
Luftæ und Raumfahrt æ Elektrischer Rechtecksteckverbinder in modularer Bauweise æ Betriebstemperatur
s y w
¹C konstant æ Teil
r r uã Modul Serie
t und Serie
u æ Produktnorm This European Standard was approved by CEN on
w March
t r s wä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey andUnited Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
t r s x CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
v s x wæ r r uã t r s x ESIST EN 4165-003:2016
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...