oSIST prEN 650:2025

SLOVENSKI STANDARD
01-januar-2025
Netekstilne talne obloge - Polivinilkloridne talne obloge na jutnem hrbtišču ali
hrbtišču iz poliestrske vlaknovine ali na poliestrski vlaknovini s polivinilkloridnim
hrbtiščem - Specifikacija
Resilient floor coverings - Polyvinyl chloride floor coverings on jute backing or on
polyester felt backing or on a polyester felt with a polyvinyl chloride backing -
Specification
Elastische Bodenbeläge - Bodenbeläge aus Polyvinylchlorid mit einem Rücken aus Jute
oder Polyestervlies oder auf Polyestervlies mit einem Rücken aus Polyvinylchlorid -
Spezifikation
Revêtements de sol résilients - Revêtements de sol en polychlorure de vinyle sur
support de jute ou feutre de polyester ou sur feutre de polyester avec envers en
polychlorure de vinyle - Spécifications
Ta slovenski standard je istoveten z: prEN 650
ICS:
97.150 Talne obloge Floor coverings
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2024
ICS 97.150 Will supersede EN 650:2012
English Version
Resilient floor coverings - Polyvinyl chloride floor
coverings on jute backing or on polyester felt backing or
on a polyester felt with a polyvinyl chloride backing -
Specification
Revêtements de sol résilients - Revêtements de sol en Elastische Bodenbeläge - Bodenbeläge aus
polychlorure de vinyle sur support de jute ou feutre de Polyvinylchlorid mit einem Rücken aus Jute oder
polyester ou sur feutre de polyester avec envers en Polyestervlies oder auf Polyestervlies mit einem
polychlorure de vinyle - Spécifications Rücken aus Polyvinylchlorid - Spezifikation
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 134.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 650:2024 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 5
4 Requirements and testing . 5
4.1 General requirements . 5
4.2 Classification requirements . 5
4.2.1 Wear group classification . 5
4.2.2 Wear layers . 5
4.2.3 Level of use classification . 5
4.3 Optional properties . 10
5 Marking . 11
Annex A (informative) Optional properties . 12
Bibliography. 13

European foreword
This document (prEN 650:2024) has been prepared by Technical Committee CEN/TC 134 “Resilient,
textile, laminate and modular mechanical locked floor coverings”, the secretariat of which is held by
NBN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 650:2012.
— update of the normative references;
— removal of class 22+ according to ISO 10874:2009/Amd 1:2020.

1 Scope
This document specifies the characteristics of floor coverings based on polyvinyl chloride and
modifications thereof, on jute or polyester backing or on polyester felt with polyvinyl chloride backing,
supplied in either tile or roll form.
To encourage the consumer to make an informed choice the document includes a classification system
(see EN ISO 10874) based on intensity of use, which shows where these floor coverings give satisfactory
service. It also specifies requirements for marking.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 432, Resilient floor coverings — Determination of shear force
EN 660-2, Resilient floor coverings — Determination of wear resistance — Part 2: Frick-Taber test
EN 661, Resilient floor coverings — Determination of the spreading of water
EN 663, Resilient floor coverings — Determination of conventional pattern depth
EN 684, Resilient floor coverings — Determination of seam strength
EN ISO 105-B02:2014, Textiles — Tests for colour fastness — Part B02: Colour fastness to artificial light:
Xenon arc fading lamp test (EN ISO 105-B02:2014)
EN ISO 4918, Resilient, textile and laminate floor coverings — Castor chair test (ISO 4918)
EN ISO 10874, Resilient, textile and laminate floor coverings — Classification (ISO 10874)
EN ISO 16581, Resilient and laminate floor coverings — Determination of the effect of simulated
movement of a furniture leg (ISO 16581)
EN ISO 23996, Resilient floor coverings — Determination of density (ISO 23996)
EN ISO 23997, Resilient floor coverings — Determination of mass per unit area (ISO 23997)
EN ISO 23999, Resilient floor coverings — Determination of dimensional stability and curling after
exposure to heat (ISO 23999)
EN ISO 24340, Resilient floor coverings — Determination of thickness of layers (ISO 24340)
EN ISO 24341, Resilient and textile floor coverings — Determination of length, width and straightness of
sheet (ISO 24341)
EN ISO 24342, Resilient and textile floor-covering — Determination of side length, edge straightness and
squareness of tiles and planks (ISO 24342)
EN ISO 24343-1, Resilient and laminate floor coverings — Determination of indentation and residual
indentation — Part 1: Residual indentation (ISO 24343-1)
EN ISO 24345, Resilient floor coverings — Determination of peel resistance (ISO 24345)
EN ISO 24346, Resilient floor coverings — Determination of overall thickness (ISO 24346)
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platf
...