Aerospace series - Steel and heat-resisting alloys - Wrought products - Technical specification - Part 003: Tubes

This document specifies the requirements for the ordering, manufacture, testing, inspection and delivery of steel and heat resisting alloy tube. It is presupposed to be applied when referred to and in conjunction with the EN material standard unless otherwise specified on the drawing, order or inspection schedule.

Luft- und Raumfahrt - Stahl und Hochwarmfesten Legierungen - Umgeformte Erzeugnisse - Technische Lieferbedingungen - Teil 003: Rohre

Série aérospatiale - Aciers et alliages résistant à chaud - Produits corroyés - Spécification technique - Partie 003 : Tubes

Le présent document spécifie les exigences relatives aux commandes, à la fabrication, aux essais, aux contrôles et à la livraison des tubes en acier et alliages résistant à chaud. Il est supposé être appliqué lorsqu'il est cité en référence et conjointement avec la norme de matériau EN sauf spécification contraire figurant sur le dessin, la commande ou la fiche d'essais.

Aeronavtika - Jeklo in zlitine, odporne proti vročini - Gneteni izdelki - Tehnična specifikacija - 003. del: Cevi

General Information

Status
Not Published
Public Enquiry End Date
30-May-2024
Technical Committee
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
25-Mar-2024
Due Date
12-Aug-2024

Relations

Buy Standard

Draft
prEN 4700-003:2024
English language
32 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 4700-003:2024
01-maj-2024
Aeronavtika - Jeklo in zlitine, odporne proti vročini - Gneteni izdelki - Tehnična
specifikacija - 003. del: Cevi
Aerospace series - Steel and heat-resisting alloys - Wrought products - Technical
specification - Part 003: Tubes
Luft- und Raumfahrt - Stahl und Hochwarmfesten Legierungen - Umgeformte
Erzeugnisse - Technische Lieferbedingungen - Teil 003: Rohre
Série aérospatiale - Aciers et alliages résistant à chaud - Produits corroyés -
Spécification technique - Partie 003 : Tubes
Ta slovenski standard je istoveten z: prEN 4700-003
ICS:
49.025.10 Jekla Steels
77.140.75 Jeklene cevi in cevni profili Steel pipes and tubes for
za posebne namene specific use
oSIST prEN 4700-003:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 4700-003:2024

---------------------- Page: 2 ----------------------
oSIST prEN 4700-003:2024


DRAFT
EUROPEAN STANDARD
prEN 4700-003
NORME EUROPÉENNE

EUROPÄISCHE NORM

March 2024
ICS 49.025.10 Will supersede EN 4700-003:2010
English Version

Aerospace series - Steel and heat-resisting alloys -
Wrought products - Technical specification - Part 003:
Tubes
Série aérospatiale - Aciers et alliages résistant à chaud - Luft- und Raumfahrt - Stahl und Hochwarmfesten
Produits corroyés - Spécification technique - Partie 003 Legierungen - Umgeformte Erzeugnisse - Technische
: Tubes Lieferbedingungen - Teil 003: Rohre
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 4700-003:2024 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 4700-003:2024
prEN 4700-003:2024 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 7
4 Wording of order . 7
5 Health and safety . 7
6 Technical requirements . 8
6.1 General.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.