oSIST prEN ISO 19901-1:2024
(Main)Oil and gas industries including lower carbon energy - Specific requirements for offshore structures - Part 1: Metocean design and operating considerations (ISO/DIS 19901-1:2024)
Oil and gas industries including lower carbon energy - Specific requirements for offshore structures - Part 1: Metocean design and operating considerations (ISO/DIS 19901-1:2024)
ISO 19901-1:2015 gives general requirements for the determination and use of meteorological and oceanographic (metocean) conditions for the design, construction and operation of offshore structures of all types used in the petroleum and natural gas industries.
The requirements are divided into two broad types:
- those that relate to the determination of environmental conditions in general, together with the metocean parameters that are required to adequately describe them;
- those that relate to the characterization and use of metocean parameters for the design, the construction activities or the operation of offshore structures.
The environmental conditions and metocean parameters discussed are:
- extreme and abnormal values of metocean parameters that recur with given return periods that are considerably longer than the design service life of the structure,
- long-term distributions of metocean parameters, in the form of cumulative, conditional, marginal or joint statistics of metocean parameters, and
- normal environmental conditions that are expected to occur frequently during the design service life of the structure.
Metocean parameters are applicable to:
- the determination of actions for the design of new structures,
- the determination of actions for the assessment of existing structures,
- the site-specific assessment of mobile offshore units,
- the determination of limiting environmental conditions, weather windows, actions and action effects for pre-service and post-service situations (i.e. fabrication, transportation and installation or decommissioning and removal of a structure), and
- the operation of the platform, where appropriate.
NOTE Specific metocean requirements for site-specific assessment of jack-ups are contained in ISO 19905‑1, for arctic offshore structures in ISO 19906 and for topside structures in ISO 19901‑3.
Erdöl- und Erdgasindustrie - Spezielle Anforderungen für Offshore-Anlagen - Teil 1: Grundsätze für die Auslegung und den Betrieb auf dem offenen Meer (ISO/DIS 19901-1:2024)
Industries du pétrole et du gaz naturel - Exigences spécifiques relatives aux structures en mer - Partie 1: Dispositions océano-météorologiques pour la conception et l'exploitation (ISO/DIS 19901-1:2024)
L'ISO 19901-1:2015 fournit des exigences générales relatives à la détermination et à l'utilisation des conditions océanographiques et météorologiques («océano-météorologiques») pour la conception, la construction et l'exploitation des structures en mer de tous les types utilisés dans les industries du pétrole et du gaz naturel.
Les exigences sont scindées en deux grandes catégories:
? celles liées à la détermination des conditions environnementales en général, associées aux paramètres océano-météorologiques requis pour les décrire de manière appropriée;
? celles liées à la caractérisation et à l'utilisation des paramètres océano-météorologiques pour la conception, les activités de construction ou l'exploitation des structures en mer.
Les conditions environnementales et les paramètres océano-météorologiques examinés sont:
? les valeurs extrêmes et anormales des paramètres océano-météorologiques qui réapparaissent à des intervalles de récurrence donnés nettement plus longs que la durée de vie en service de la structure;
? les distributions à long terme des paramètres océano-météorologiques, sous forme de statistiques cumulées, conditionnelles, marginales ou conjointes; et
? les conditions environnementales normales dont l'occurrence fréquente est attendue tout au long de la durée de vie en service de la structure.
Les paramètres océano-météorologiques sont applicables à:
? la détermination des actions pour la conception des nouvelles structures;
? la détermination des actions pour l'évaluation des structures existantes;
? l'évaluation spécifique au site des unités mobiles en mer;
? la détermination des conditions environnementales restrictives, des fenêtres météorologiques, des actions et de leurs effets pour les situations de pré- et post-service (c'est-à-dire la fabrication, le transport et l'installation ou la mise hors service et l'enlèvement d'une structure); et
? l'exploitation de la plate-forme, le cas échéant.
Naftna in plinska industrija, vključno z nizkoogljično energijo - Posebne zahteve za naftne ploščadi - 1. del: Določila za načrtovanje in obratovanje ob upoštevanju oceanografskih in meteoroloških vidikov (ISO/DIS 19901-1:2024)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2024
Naftna in plinska industrija, vključno z nizkoogljično energijo - Posebne zahteve za
naftne ploščadi - 1. del: Določila za načrtovanje in obratovanje ob upoštevanju
oceanografskih in meteoroloških vidikov (ISO/DIS 19901-1:2024)
Oil and gas industries including lower carbon energy - Specific requirements for offshore
structures - Part 1: Metocean design and operating considerations (ISO/DIS 19901-
1:2024)
Erdöl- und Erdgasindustrie - Spezielle Anforderungen für Offshore-Anlagen - Teil 1:
Grundsätze für die Auslegung und den Betrieb auf dem offenen Meer (ISO/DIS 19901-
1:2024)
Industries du pétrole et du gaz naturel - Exigences spécifiques relatives aux structures
en mer - Partie 1: Dispositions océano-météorologiques pour la conception et
l'exploitation (ISO/DIS 19901-1:2024)
Ta slovenski standard je istoveten z: prEN ISO 19901-1
ICS:
75.180.10 Oprema za raziskovanje, Exploratory, drilling and
vrtanje in odkopavanje extraction equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
International
Standard
ISO/DIS 19901-1
ISO/TC 67/SC 7
Oil and gas industries including
Secretariat: BSI
lower carbon energy — Specific
Voting begins on:
requirements for offshore
2024-08-15
structures —
Voting terminates on:
2024-11-07
Part 1:
Metocean design and operating
considerations
ICS: 75.180.10
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO/DIS 19901-1:2024(en)
DRAFT
ISO/DIS 19901-1:2024(en)
International
Standard
ISO/DIS 19901-1
ISO/TC 67/SC 7
Oil and gas industries including
Secretariat: BSI
lower carbon energy — Specific
Voting begins on:
requirements for offshore
structures —
Voting terminates on:
Part 1:
Metocean design and operating
considerations
ICS: 75.180.10
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2024
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: +41 22 749 01 11
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/DIS 19901-1:2024(en)
ii
ISO/DIS 19901-1:2024(en)
Contents Page
Foreword .v
Introduction .vii
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Symbols and abbreviated terms.10
4.1 Symbols .10
4.2 Abbreviated terms . 12
5 Determining the relevant metocean parameters .12
5.1 General . 12
5.2 Expert development of metocean criteria. 13
5.3 Selecting appropriate parameters for determining design actions and action effects . 13
5.4 The metocean database . 15
5.5 Storm types in a region . 15
5.6 Directionality . 15
5.7 Extrapolation to extreme and abnormal conditions . 15
5.8 Metocean parameters for fatigue assessments .16
5.9 Metocean parameters for short-term activities.17
5.10 Metocean parameters for medium-term activities .18
6 Water depth, tides and storm surges .18
6.1 General .18
6.2 Tides .19
6.3 Storm surges .19
6.4 Extreme water level .19
7 Wind .20
7.1 General . 20
7.2 Wind actions and action effects .21
7.3 Wind profile and time-averaged wind speed . 22
7.4 Wind spectra . 22
8 Waves .22
8.1 General . 22
8.2 Wave actions and action effects . 23
8.3 Sea-states — Spectral waves .24
8.3.1 Wave spectrum .24
8.3.2 Directional spreading .24
8.3.3 Wave periods .24
8.3.4 Wave kinematics — Velocities and accelerations .24
8.4 Regular (periodic) waves . 25
8.4.1 General . 25
8.4.2 Wave period . 25
8.4.3 Wave kinematics — Velocities and accelerations . 25
8.4.4 Intrinsic, apparent and encounter wave periods . 26
8.5 Maximum height of an individual wave for long return periods .27
8.6 Linear and non linear wave models .27
8.7 Wave crest elevation .27
9 Currents.28
9.1 General . 28
9.2 Current velocities . 28
9.3 Current profile . 29
9.4 Current profile stretching . 29
9.5 Current blockage . . 29
iii
ISO/DIS 19901-1:2024(en)
9.6 Tidal Currents .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.