SIST EN ISO 13254:2018
(Main)Thermoplastics piping systems for non-pressure applications - Test method for watertightness (ISO 13254:2010)
Thermoplastics piping systems for non-pressure applications - Test method for watertightness (ISO 13254:2010)
ISO 13254:2010 specifies a test method for watertightness of thermoplastics products fabricated from more than one piece for non-pressure applications, and joints of thermoplastics piping systems for non-pressure applications.
Rohrleitungssysteme aus Thermoplasten für drucklose Anwendungen - Prüfverfahren auf die Wasserdichtheit (ISO 13254:2010)
Diese Internationale Norm legt ein Prüfverfahren für die Wasserdichtheit von aus mehreren Teilen bestehenden handgefertigten Produkten aus Thermoplasten für drucklose Anwendungen sowie für Ver-bindungen in Rohrleitungssystemen aus Thermoplasten für drucklose Anwendungen fest.
Systèmes de canalisations thermoplastiques pour applications sans pression - Méthode d'essai de l'étanchéité à l'eau (ISO 13254:2010)
L'ISO 13254:2010 spécifie une méthode d'essai concernant l'étanchéité à l'eau des produits thermoplastiques façonnés à partir de plus d'une pièce, pour des applications sans pression et des assemblages des systèmes de canalisations thermoplastiques pour des applications sans pression.
Plastomerni cevni sistemi, ki delujejo po težnostnem principu - Metoda za preskus vodotesnosti (ISO 13254:2010)
Standard ISO 13254:2010 določa preskusno metodo za vodotesnost plastomernih izdelkov, ki so izdelani iz več kot enega kosa in delujejo po težnostnem principu, ter spojev plastomernih cevnih sistemov, ki delujejo po težnostnem principu.
General Information
- Status
- Published
- Public Enquiry End Date
- 19-May-2017
- Publication Date
- 12-Dec-2017
- Technical Committee
- PCV - Plastic pipes, fittings and valves
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 07-Nov-2017
- Due Date
- 12-Jan-2018
- Completion Date
- 13-Dec-2017
Relations
- Effective Date
- 01-Jan-2018
Overview
EN ISO 13254:2017 - Thermoplastics piping systems for non-pressure applications - specifies a standardized test method for watertightness of thermoplastic products and joints used in non-pressure systems (e.g., gravity drainage, soil and waste systems). Adopted by CEN from ISO 13254:2010, this standard defines how to assemble, pressurize and inspect test pieces to verify leak-tight performance under controlled conditions.
Keywords: EN ISO 13254:2017, watertightness test, thermoplastics piping systems, non-pressure applications, hydrostatic pressure test, leakage testing.
Key topics and technical requirements
- Scope: Applies to fabricated thermoplastic products made from more than one piece and to joints of thermoplastic piping systems intended for non-pressure service.
- Test principle: Subject a fabricated product or assembly (pipes and/or fittings including at least one joint under test) to a specified internal hydrostatic pressure for a defined time while inspecting for leakage.
- Test conditions:
- Test temperature: (23 ± 5) °C using cold tap water; avoid surface condensation.
- Pressure level: nominal test at 0.5 bar.
- Duration: for fabricated products an accelerated procedure maintaining 0.5 bar for at least 1 minute; for non-fabricated assemblies raise pressure smoothly (within 15 minutes) to 0.5 bar and maintain for at least 15 minutes.
- Angular deflection: where permitted, joints should be arranged at the manufacturer’s stated maximum angular deflection for the joint being tested.
- Apparatus requirements: end-sealing devices appropriate to joint type, hydrostatic pressure source capable of applying and holding the required pressure, bleed valve for air removal, and a pressure-measuring device.
- Test pieces: Assemble per manufacturer instructions; sample spigot/socket combinations that represent the smallest spigot and largest socket within tolerances. Test pieces may be inclined up to 12° to assist air removal.
- Reporting: The test report must reference the standard and include component IDs and diameters, test temperature and pressure, duration, deflection angle (if any), leakage observations (position and pressure of occurrence), appearance changes, and test date.
Applications and users
- Manufacturers of thermoplastic pipes, fittings and fabricated drainage products validating product watertightness.
- Independent test laboratories performing type or batch testing and compliance verification.
- Specifiers, consultants and installers of gravity drainage, soil and waste and other non-pressure piping systems who require validated joint performance data.
- Regulatory and conformity assessment bodies needing standardized test evidence.
Related standards
- ISO 13254:2010 - original international text adopted unchanged as EN ISO 13254:2017.
- Supersedes EN 1053:1995 (previous European standard for watertightness testing).
- Developed by ISO/TC 138 and CEN/TC 155 (plastics piping systems).
Frequently Asked Questions
SIST EN ISO 13254:2018 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Thermoplastics piping systems for non-pressure applications - Test method for watertightness (ISO 13254:2010)". This standard covers: ISO 13254:2010 specifies a test method for watertightness of thermoplastics products fabricated from more than one piece for non-pressure applications, and joints of thermoplastics piping systems for non-pressure applications.
ISO 13254:2010 specifies a test method for watertightness of thermoplastics products fabricated from more than one piece for non-pressure applications, and joints of thermoplastics piping systems for non-pressure applications.
SIST EN ISO 13254:2018 is classified under the following ICS (International Classification for Standards) categories: 23.040.20 - Plastics pipes. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN ISO 13254:2018 has the following relationships with other standards: It is inter standard links to SIST EN 1053:1997. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN ISO 13254:2018 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2018
1DGRPHãþD
SIST EN 1053:1997
Plastomerni cevni sistemi, ki delujejo po težnostnem principu - Metoda za preskus
vodotesnosti (ISO 13254:2010)
Thermoplastics piping systems for non-pressure applications - Test method for
watertightness (ISO 13254:2010)
Rohrleitungssysteme aus Thermoplasten für drucklose Anwendungen - Prüfverfahren
auf die Wasserdichtheit (ISO 13254:2010)
Systèmes de canalisations thermoplastiques pour applications sans pression - Méthode
d'essai de l'étanchéité à l'eau (ISO 13254:2010)
Ta slovenski standard je istoveten z: EN ISO 13254:2017
ICS:
23.040.20 Cevi iz polimernih materialov Plastics pipes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 13254
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2017
EUROPÄISCHE NORM
ICS 23.040.20; 91.140.80 Supersedes EN 1053:1995
English Version
Thermoplastics piping systems for non-pressure
applications - Test method for watertightness (ISO
13254:2010)
Systèmes de canalisations thermoplastiques pour Rohrleitungssysteme aus Thermoplasten für drucklose
applications sans pression - Méthode d'essai de Anwendungen - Prüfverfahren auf die Wasserdichtheit
l'étanchéité à l'eau (ISO 13254:2010) (ISO 13254:2010)
This European Standard was approved by CEN on 19 September 2017.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13254:2017 E
worldwide for CEN national Members.
Contents Page
European Foreword . 3
European Foreword
The text of ISO 13254:2010 has been prepared by Technical Committee ISO/TC 138 “Plastics pipes,
fittings and valves for the transport of fluids” of the International Organization for Standardization
(ISO) and has been taken over as EN ISO 13254:2017 by Technical Committee CEN/TC 155 “Plastics
piping systems and ducting systems” the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2018 and conflicting national standards shall be
withdrawn at the latest by October 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 1053:1995.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,
Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
the United Kingdom.
Endorsement notice
The text of ISO 13254:2010 has been approved by CEN as a EN ISO 13254:2017 without any
modification.
INTERNATIONAL ISO
STANDARD 13254
First edition
2010-05-01
Thermoplastics piping systems for non-
pressure applications — Test method for
watertightness
Systèmes de canalisations thermoplastiques pour applications sans
pression — Méthode d'essai de l'étanchéité à l'eau
Reference number
ISO 13254:2010(E)
©
ISO 2010
ISO 13254:2010(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2010
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2010 – All rights reserved
ISO 13254:2010(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...