SIST EN ISO 17829:2016

SLOVENSKI STANDARD
SIST EN ISO 17829:2016
01-januar-2016
1DGRPHãþD
SIST EN 16127:2012
7UGQDELRJRULYD'RORþHYDQMHGROåLQHLQSUHPHUDSHOHWRY,62
Solid biofuels - Determination of length and diameter of pellets (ISO 17829:2015)
Biogene Festbrennstoffe - Bestimmung der Länge und des Durchmessers von Pellets
(ISO 17829:2015)
Biocombustibles solides - Détermination de la longueur et du diamètre des granulés (ISO
17829:2015)
Ta slovenski standard je istoveten z: EN ISO 17829:2015
ICS:
27.190 Biološki viri in drugi Biological sources and
alternativni viri energije alternative sources of energy
75.160.10 Trda goriva Solid fuels
SIST EN ISO 17829:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 17829:2016

---------------------- Page: 2 ----------------------

SIST EN ISO 17829:2016


EN ISO 17829
EUROPEAN STANDARD

NORME EUROPÉENNE

November 2015
EUROPÄISCHE NORM
ICS 27.190; 75.160.10 Supersedes EN 16127:2012
English Version

Solid biofuels - Determination of length and diameter of
pellets (ISO 17829:2015)
Biocombustibles solides - Détermination de la Biogene Festbrennstoffe - Bestimmung der Länge und
longueur et du diamètre des granulés (ISO des Durchmessers von Pellets (ISO 17829:2015)
17829:2015)
This European Standard was approved by CEN on 5 September 2015.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17829:2015 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 17829:2016
EN ISO 17829:2015 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 17829:2016
EN ISO 17829:2015 (E)
European foreword
This document (EN ISO 17829:2015) has been prepared by Technical Committee ISO/TC 238 "Solid
biofuels" in collaboration with Technical Committee CEN/TC 335 “Solid biofuels” the secretariat of
which is held by SIS.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2016, and conflicting national standards shall be
withdrawn at the latest by May 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN 16127:2012.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 17829:2015 has been approved by CEN as EN ISO 17829:2015 without any modification.
3

---------------------- Page: 5 ----------------------

SIST EN ISO 17829:2016

---------------------- Page: 6 ----------------------

SIST EN ISO 17829:2016
INTERNATIONAL ISO
STANDARD 17829
First edition
2015-10-15
Solid Biofuels — Determination of
length and diameter of pellets
Biocombustibles solides — Détermination de la longueur et du
diamètre des granulés
Reference number
ISO 17829:2015(E)
©
ISO 2015

---------------------- Page: 7 ----------------------

SIST EN ISO 17829:2016
ISO 17829:2015(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2015 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 17829:2016
ISO 17829:2015(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus . 2
6 Sample preparation . 2
7 Procedure. 3
7.1 Determination of pellet diameter class. 3
7.2 Measuring of individual pellet length . 3
7.3 Determination share of oversize length of pellets . 3
7.3.1 Weighing . 3
7.3.2 Sorting by length . 3
7.3.3 Weighing of fractions by length . 3
8 Calculation . 4
8.1 Pellet diameter class . 4
8.2 Share of oversize pellets . 4
8.3 Average pellet length . 4
9 Performance characteristics . 4
10 Test report . 4
© ISO 2015 – All rights reserved iii

---------------------- Page: 9 -
...