SIST EN 1459:1999
(Main)Safety of industrial trucks - Self-propelled variable reach trucks
Safety of industrial trucks - Self-propelled variable reach trucks
This standard applies to self-propelled seated rider operated variable reach trucks intended to handle loads of all kinds using one of the attachments listed in 3.10 - 3.11 - 3.13 - 3.14 - 3.15 - 3.16 - 3.19 - 3.20. It does not cover the lifting of persons by any attachments, in particular by work platforms. Machines with variable length load suspension elements (chains, ropes etc) from which the load may swing freely in all directions are not covered in this standard.
Sicherheit von Flurförderzeugen - Kraftbetriebene Stapler mit veränderlicher Reichweite
Diese Norm gilt für kraftbetriebene Mitfahrer-Flurförderzeuge mit veränderlicher Reichweite, zur Handhabung unterschiedlicher Lasten mit Hilfe von Anbaugeräten, wie sie z. B. in 3.10 - 3.11 - 3.13 - 3.14 - 3.15 - 3.16 - 3.19 und 3.10 aufgeführt sind. In dieser Norm wird das Anheben von Personen mit Hilfe von Anbaugeräten, wie z. B. Arbeitsbühnen, nicht behandelt. Sie gilt nicht für Flurförderzeuge, die mit Tragmitteln veränderlicher Länge ausgerüstet sind (wie Ketten oder Seile) und ein freies Pendeln der Last in alle Richtungen ermöglichen.
Sécurité des chariots de manutention - Chariots automoteurs a portée variable
La présente norme s'applique aux chariots de manutention automoteurs à conducteur porté à portée variable destinés à manutentionner des charges de toute nature à l'aide d'un des équipements tels que énumérés, par exemple en 3.10 - 3.11 - 3.13 - 3.14 - 3.15 - 3.16 - 3.19 3.20. Elle ne traite pas du levage des personnes au moyen d'un quelconque équipement, notamment une plate-forme de travail. Elle ne s'applique pas aux chariots comportant des éléments de suspension de la charge à longueur variable (tels que chaînes, câbles) et permettant à la charge d'osciller librement en toutes directions.
Varnost vozil za talni transport - Samognana vozila z mehanizmom za dviganje s spremenljivim dosegom
General Information
- Status
- Withdrawn
- Publication Date
- 31-May-1999
- Withdrawal Date
- 16-May-2010
- Technical Committee
- DTN - Lift and transport appliances
- Current Stage
- 9900 - Withdrawal (Adopted Project)
- Start Date
- 17-May-2010
- Due Date
- 09-Jun-2010
- Completion Date
- 17-May-2010
- Directive
- 98/37/EC - Machinery
Relations
- Effective Date
- 01-Mar-2014
- Replaced By
SIST EN 1459:1999+A2:2010 - Safety of industrial trucks - Self-propelled variable reach trucks - Effective Date
- 01-Jun-2010
- Consolidated By
SIST EN 1459:1999+A2:2010 - Safety of industrial trucks - Self-propelled variable reach trucks - Effective Date
- 08-Jun-2022
- Amended By
SIST EN 1459:1999/A1:2007 - Safety of industrial trucks - Self-propelled variable reach trucks - Effective Date
- 01-Mar-2007
- Corrected By
SIST EN 1459:1999/AC:2007 - Safety of industrial trucks - Self-propelled variable reach trucks - Effective Date
- 01-Mar-2007
- Effective Date
- 01-Oct-2012
- Effective Date
- 01-Oct-2010
Frequently Asked Questions
SIST EN 1459:1999 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Safety of industrial trucks - Self-propelled variable reach trucks". This standard covers: This standard applies to self-propelled seated rider operated variable reach trucks intended to handle loads of all kinds using one of the attachments listed in 3.10 - 3.11 - 3.13 - 3.14 - 3.15 - 3.16 - 3.19 - 3.20. It does not cover the lifting of persons by any attachments, in particular by work platforms. Machines with variable length load suspension elements (chains, ropes etc) from which the load may swing freely in all directions are not covered in this standard.
This standard applies to self-propelled seated rider operated variable reach trucks intended to handle loads of all kinds using one of the attachments listed in 3.10 - 3.11 - 3.13 - 3.14 - 3.15 - 3.16 - 3.19 - 3.20. It does not cover the lifting of persons by any attachments, in particular by work platforms. Machines with variable length load suspension elements (chains, ropes etc) from which the load may swing freely in all directions are not covered in this standard.
SIST EN 1459:1999 is classified under the following ICS (International Classification for Standards) categories: 53.060 - Industrial trucks. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 1459:1999 has the following relationships with other standards: It is inter standard links to SIST EN ISO 3691-6:2014, SIST EN 1459:1999+A2:2010, SIST EN 1459:1999+A2:2010, SIST EN 1459:1999/A1:2007, SIST EN 1459:1999/AC:2007, SIST EN ISO 3691-1:2012, SIST EN ISO 3691-5:2010. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 1459:1999 is associated with the following European legislation: EU Directives/Regulations: 98/37/EC; Standardization Mandates: M/BC/CEN/91/1. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
SIST EN 1459:1999 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-1999
Varnost vozil za talni transport - Samognana vozila z mehanizmom za dviganje s
spremenljivim dosegom
Safety of industrial trucks - Self-propelled variable reach trucks
Sicherheit von Flurförderzeugen - Kraftbetriebene Stapler mit veränderlicher Reichweite
Sécurité des chariots de manutention - Chariots automoteurs a portée variable
Ta slovenski standard je istoveten z: EN 1459:1998
ICS:
53.060 Industrijski tovornjaki Industrial trucks
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
SIST EN 14
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...