SIST EN ISO 15708-1:2019
(Main)Non-destructive testing - Radiation methods for computed tomography - Part 1: Terminology (ISO 15708-1:2017)
Non-destructive testing - Radiation methods for computed tomography - Part 1: Terminology (ISO 15708-1:2017)
ISO 15708-1:2017 gives the definitions of terms used in the field of computed tomography (CT). It presents a terminology that is not only CT-specific but which also includes other more generic terms and definitions spanning imaging and radiography. Some of the definitions represent discussion points aimed at refocusing their terms in the specific context of computed tomography.
Zerstörungsfreie Prüfung - Durchstrahlungsverfahren für Computertomografie - Teil 1: Terminologie (ISO 15708-1:2017)
Dieses Dokument legt die auf dem Gebiet der Computertomographie (CT) verwendeten Begriffe fest. Es enthält nicht nur für die Computertomographie spezifische Begriffe, sondern auch allgemeinere Begriffe, die übergreifend für die bildliche Darstellung und Durchstrahlung gelten. Die Definitionen für einige dieser Begriffe stellen Diskussionspunkte dar, mit dem Ziel, die jeweiligen Begriffe in einen spezifischeren Zusammenhang mit Computertomographie zu bringen.
Essais non destructifs - Méthodes par rayonnements pour la tomographie informatisée - Partie 1: Terminologie (ISO 15708-1:2017)
Le présent document donne les définitions des termes utilisés dans le domaine de la tomographie informatisée (TI). Il contient non seulement des termes spécifiques de la tomographie informatisée, mais également des termes plus généraux recouvrant l'imagerie et la radiographie. Les définitions de certains de ces termes comportent un élément de discussion destiné à recentrer le terme dans le contexte plus spécifique de la tomographie informatisée.
Neporušitvene preiskave - Sevalne metode za računalniško tomografijo - 1. del: Terminologija (ISO 15708-1:2017)
Standard ISO 15708-1:2017 podaja definicije terminov, ki se uporabljajo na področju računalniške tomografije (CT). Podaja terminologijo, ki ni specifična le za računalniško tomografijo, ampak vsebuje tudi bolj splošne termine in definicije, ki obsegajo slikanje in radiografijo. Nekatere od definicij predstavljajo točke, v katerih so termini podrobneje razloženi v okviru računalniške tomografije.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 15708-1:2019
01-julij-2019
Nadomešča:
SIST EN 16016-1:2012
Neporušitvene preiskave - Sevalne metode za računalniško tomografijo - 1. del:
Terminologija (ISO 15708-1:2017)
Non-destructive testing - Radiation methods for computed tomography - Part 1:
Terminology (ISO 15708-1:2017)
Zerstörungsfreie Prüfung - Durchstrahlungsverfahren für Computertomografie - Teil 1:
Terminologie (ISO 15708-1:2017)
Essais non destructifs - Méthodes par rayonnements pour la tomographie informatisée -
Partie 1: Terminologie (ISO 15708-1:2017)
Ta slovenski standard je istoveten z: EN ISO 15708-1:2019
ICS:
01.040.19 Preskušanje (Slovarji) Testing (Vocabularies)
19.100 Neporušitveno preskušanje Non-destructive testing
SIST EN ISO 15708-1:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 15708-1:2019
---------------------- Page: 2 ----------------------
SIST EN ISO 15708-1:2019
EN ISO 15708-1
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2019
EUROPÄISCHE NORM
ICS 19.100 Supersedes EN 16016-1:2011
English Version
Non-destructive testing - Radiation methods for computed
tomography - Part 1: Terminology (ISO 15708-1:2017)
Essais non destructifs - Méthodes par rayonnements Zerstörungsfreie Prüfung - Durchstrahlungsverfahren
pour la tomographie informatisée - Partie 1: für Computertomografie - Teil 1: Terminologie (ISO
Terminologie (ISO 15708-1:2017) 15708-1:2017)
This European Standard was approved by CEN on 11 February 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15708-1:2019 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 15708-1:2019
EN ISO 15708-1:2019 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 15708-1:2019
EN ISO 15708-1:2019 (E)
European foreword
The text of ISO 15708-1:2017 has been prepared by Technical Committee ISO/TC 135 "Non-destructive
testing” of the International Organization for Standardization (ISO) and has been taken over as
EN ISO 15708-1:2019 by Technical Committee CEN/TC 138 “Non-destructive testing” the secretariat of
which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2019, and conflicting national standards shall
be withdrawn at the latest by October 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 16016-1:2011.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 15708-1:2017 has been approved by CEN as EN ISO 15708-1:2019 without any
modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 15708-1:2019
---------------------- Page: 6 ----------------------
SIST EN ISO 15708-1:2019
INTERNATIONAL ISO
STANDARD 15708-1
Second edition
2017-02
Non-destructive testing — Radiation
methods for computed tomography —
Part 1:
Terminology
Essais non destructifs — Méthodes par rayonnements pour la
tomographie informatisée —
Partie 1: Terminologie
Reference number
ISO 15708-1:2017(E)
©
ISO 2017
---------------------- Page: 7 ----------------------
SIST EN ISO 15708-1:2019
ISO 15708-1:2017(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 15708-1:2019
ISO 15708-1:2017(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
© ISO 2017 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 15708-1:2019
ISO 15708-1:2017(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenan
...
SLOVENSKI STANDARD
oSIST prEN ISO 15708-1:2018
01-december-2018
1HSRUXãLWYHQRSUHVNXãDQMH6HYDOQHPHWRGH]DUDþXQDOQLãNRWRPRJUDILMRGHO
7HUPLQRORJLMD ,62
Non-destructive testing - Radiation methods for computed tomography - Part 1:
Terminology (ISO 15708-1:2017)
Zerstörungsfreie Prüfung - Durchstrahlungsverfahren für Computertomografie - Teil 1:
Terminologie (ISO 15708-1:2017)
Essais non destructifs - Méthodes par rayonnements pour la tomographie informatisée -
Partie 1: Terminologie (ISO 15708-1:2017)
Ta slovenski standard je istoveten z: prEN ISO 15708-1
ICS:
01.040.19 Preskušanje (Slovarji) Testing (Vocabularies)
19.100 Neporušitveno preskušanje Non-destructive testing
oSIST prEN ISO 15708-1:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 15708-1:2018
---------------------- Page: 2 ----------------------
oSIST prEN ISO 15708-1:2018
INTERNATIONAL ISO
STANDARD 15708-1
Second edition
2017-02
Non-destructive testing — Radiation
methods for computed tomography —
Part 1:
Terminology
Essais non destructifs — Méthodes par rayonnements pour la
tomographie informatisée —
Partie 1: Terminologie
Reference number
ISO 15708-1:2017(E)
©
ISO 2017
---------------------- Page: 3 ----------------------
oSIST prEN ISO 15708-1:2018
ISO 15708-1:2017(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 15708-1:2018
ISO 15708-1:2017(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
© ISO 2017 – All rights reserved iii
---------------------- Page: 5 ----------------------
oSIST prEN ISO 15708-1:2018
ISO 15708-1:2017(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www. iso. org/d irectives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www. iso. org/p atents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment,
as well as information about ISO’s adherence to the World Trade Organization (WTO) principles in the
Technical Barriers to Trade (TBT) see the following URL: ww w . i so. org/i so/f oreword. html
This document was prepared by the European Committee for Standardization (CEN) (as EN 16016-1)
and was adopted, under a special “fast-track procedure”, by Technical Committee ISO/TC 135, Non-
destructive testing, Subcommittee SC 5, Radiographic testing, in parallel with its approval by the ISO
member bodies.
The first edition (ISO 15708-1:2002) having been cancelled and replaced by ISO 15708-2:2017,
this second edition of ISO 15708-1 has been repurposed with a different title and scope and takes
into consideration developments in computed tomography (CT) and computational power over the
preceding decade.
A list of all parts in the ISO 15708 series can be found on the ISO website.
iv © ISO 2017 – All rights reserved
---------------------- Page: 6 ----------------------
oSIST prEN ISO 15708-1:2018
INTERNATIONAL STANDARD ISO 15708-1:2017(E)
Non-destructive testing — Radiation methods for
computed tomograph
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.