SIST EN 4526:2014
(Main)Aerospace series - Metallic materials - Test methods - Sharp edge-notch tensile testing for sheet and strip
Aerospace series - Metallic materials - Test methods - Sharp edge-notch tensile testing for sheet and strip
This European Standard specifies the requirements for sharp edge-notch tensile testing for sheet and strip for aerospace applications. It shall be applied when referred to in the EN Technical Specification or material standard unless otherwise specified on the drawing, order or inspection schedule.
Luft- und Raumfahrt - Metallische Werkstoffe - Prüfverfahren - Zugversuch an Spitzkerbproben von Blechen und Bändern
Diese Norm legt die Anforderungen für Zugversuche an Spitzkerbproben von Blechen und Bändern zur Anwendung in der Luft- und Raumfahrt fest.
Sofern nicht in der Zeichnung, der Bestellung oder in der Prüfanweisung anderweitig angegeben, ist sie anzuwenden, wenn in einer Europäischen Werkstoffnorm oder Norm für Technische Lieferbedingungen auf sie verwiesen wird.
Série aérospatiale - Matériaux métalliques - Méthodes d'essais - Essai de traction sur éprouvette à bord entaillé pour tôles et bandes
La présente Norme européenne spécifie les exigences relatives aux essais de traction sur éprouvette à bord entaillé pour tôles et bandes pour les applications aérospatiales.
Elle doit être appliquée lorsqu’elle est citée en référence dans la spécification technique ou la norme de matériau EN sauf indication contraire indiquée sur le dessin, commande ou programme de contrôle.
Aeronavtika - Kovinski materiali - Preskusne metode - Preskušanje natezne trdnosti z ostro robno zarezo pri pločevini in trakovih
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Metallische Werkstoffe - Prüfverfahren - Zugversuch an Spitzkerbproben von Blechen und BändernSérie aérospatiale - Matériaux métalliques - Méthodes d'essais - Essai de traction sur éprouvette à bord entaillé pour tôles et bandesAerospace series - Metallic materials - Test methods - Sharp edge-notch tensile testing for sheet and strip49.025.15Neželezove zlitine na splošnoNon-ferrous alloys in general49.025.05Železove zlitine na splošnoFerrous alloys in generalICS:Ta slovenski standard je istoveten z:EN 4526:2013SIST EN 4526:2014en01-februar-2014SIST EN 4526:2014SLOVENSKI
STANDARD
SIST EN 4526:2014
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4526
January 2013 ICS 49.025.05; 49.025.15 English Version
Aerospace series - Metallic materials - Test methods - Sharp edge-notch tensile testing for sheet and strip
Série aérospatiale - Matériaux métalliques - Méthodes d'essais - Essai de traction sur éprouvette à bord entaillé pour tôles et bandes
Luft- und Raumfahrt - Metallische Werkstoffe - Prüfverfahren - Zugversuch an Spitzkerbproben von Blechen und Bändern This European Standard was approved by CEN on 10 November 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4526:2013: ESIST EN 4526:2014
EN 4526:2013 (E) 2 Contents Page Foreword . 3 Introduction . 4 1 Scope . 5 2 Normative references . 5 3 Terms, definitions and symbols . 5 4 Health and safety . 5 5 Principle. 5 6 Testing requirements . 6 7 Test report . 7
SIST EN 4526:2014
EN 4526:2013 (E) 3 Foreword This document (EN 4526:2013) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2013, and conflicting national standards shall be withdrawn at the latest by July 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the follow
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.