Hardwood round timber - Qualitative classification - Part 1: Oak and beech

This European Standard specifies a qualitative classification and grade designations for felled round timber of oak and beech presented in the form of long poles or logs.
The classifications describe quality classes of round timbers for which the intended use is not known.
The classification applies for the following species: Oaks, Quercus sessiliflora SALISB. (or Quercus petraea LIEBL.), Quercus robur L. (or Quercus pedunculata EHRH.) and Beech (Fagus sylvatica L).

Laub-Rundholz - Qualitäts-Sortierung - Teil 1: Eiche und Buche

Diese Europäische Norm legt die Qualitäts-Sortierung und Kennzeichnung der Klassen für gefälltes Eichen- oder Buchenrundholz in Form von Langholz oder Stammabschnitten fest. Die Sortierung beschreibt Qualitätsklassen für Rundhölzer, deren zukünftige Nutzung nicht bekannt ist. Die Sortierung gilt für folgende Arten: Traubeneiche (Quercus sessiliflora SALISB. oder Quercus petraea LIBL.), Stieleiche (Quercus robur L. oder Quercus pedunculata EHRH) und Buche (Fagus sylvatica L.).

Bois ronds feuillus - Classement qualitatif - Partie 1: Chêne et hêtre

La présente norme Européenne prescrit le classement qualitatif et les appellations des classements des bois
abattus de chêne et de hêtre qui se présentent sous forme de grumes ou billes.
Les classements décrivent des classes de qualité des bois ronds pour lesquelles l’utilisation n’est pas connue.
Le présent classement s’applique pour les espèces suivantes : Chênes, Quercus sessiliflora SALISB. (ou
Quercus petraea LIEBL.), Quercus robur L. (ou Quercus pedunculata EHRH.) et hêtre (Fagus sylvatica L).

Okrogli les listavcev - Razvrščanje po kakovosti - 1. del: Hrast in bukev

Ta evropski standard določa razvrščanje po kakovosti in označbe razreda za posekana okrogla debla hrasta in bukve v obliki dolgega okroglega lesa ali okroglic. Razvrstitev opisuje kakovostne razrede okroglega lesa, za katerega namen uporabe ni znan. Razvrstitev se uporablja za naslednje vrste: hrast, Quercus sessiliflora SALISB. (ali Quercus petraea LIEBL.), Quercus robur L. (ali Quercus pedunculata EHRH.) in bukev (Fagus sylvatica L.).

General Information

Status
Published
Public Enquiry End Date
30-Mar-2010
Publication Date
27-Dec-2012
ICS
79.040 - Wood, sawlogs and sawn timber
Technical Committee
LLZ - Les, lesni izdelki in zaščita lesa
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
05-Nov-2012
Due Date
10-Jan-2013
Completion Date
28-Dec-2012
Ref Project
EN 1316-1:2012 - Hardwood round timber - Qualitative classification - Part 1: Oak and beech

Relations

Replaces
SIST EN 1316-1:2003 - Hardwood round timber - Qualitative classification - Part 1: Oak and beech
Effective Date
01-Jan-2013

Overview

EN 1316-1:2012 - published by CEN - defines a qualitative classification and grade designations for felled hardwood round timber of oak and beech presented as long poles or logs. The standard covers oaks (Quercus sessiliflora / Quercus petraea and Quercus robur / Quercus pedunculata) and beech (Fagus sylvatica). It describes quality classes for round timber when the intended end use is not yet known and supersedes the 1997 edition.

Keywords: EN 1316-1:2012, hardwood round timber, oak and beech, qualitative classification, timber grading.

Key Topics

  • Quality classes A, B, C, D - general definitions:
    • A: First quality (butt logs or clear timber with only minor features).
    • B: Average to first quality (knots and common features tolerated).
    • C: Average to low quality (features allowed that do not seriously impair wood).
    • D: Timber usable for sawing but not fitting A–C criteria.
  • Grading principles - each pole/log is assessed by dimensions and the presence, size and distribution of features (knots, cracks, shakes, sapwood, rot, spiral grain, eccentric pith, red heart, etc.).
  • Quantitative limits - the standard contains tabulated grading rules for oak and beech (minimum lengths and mid-diameter limits under bark, permitted knot sizes/frequencies, allowable crack lengths, limits on growth rate, sapwood thickness, red heart, rot percentages, etc.).
  • Measurement methods - grading and measurements are to be performed in accordance with EN 1309-2, EN 1310 and EN 1311.
  • Species identification - classification is completed with the Latin species name or an accepted abbreviation (e.g., Q-B for Quercus class B).

Applications

EN 1316-1:2012 is practical for professionals needing consistent, Europe‑wide rules for assessing hardwood round timber quality:

  • Sawmills and log buyers - for purchase specifications, sorting and pricing.
  • Forest owners and timber harvest contractors - for grading felled oak and beech prior to sale.
  • Timber traders and exporters - to specify and verify grade declarations in contracts.
  • Quality control and procurement teams - for acceptance criteria and lot grading.
  • Engineers, architects and end‑users - when specifying raw log quality for specialized uses where clearwood is required.
  • Certification bodies and standardization teams - for conformity assessment and cross‑border trade alignment.

Related Standards

  • EN 1316-2 (Hardwood round timber - Qualitative classification - Part 2: Poplar)
  • EN 844 series (terminology for round and sawn timber)
  • EN 1309-2, EN 1310, EN 1311 (measurement and feature assessment methods)

Using EN 1316-1:2012 ensures consistent round timber grading of oak and beech across CEN member countries, improving transparency in the supply chain and facilitating fair commercial trade.

Frequently Asked Questions

SIST EN 1316-1:2013 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Hardwood round timber - Qualitative classification - Part 1: Oak and beech". This standard covers: This European Standard specifies a qualitative classification and grade designations for felled round timber of oak and beech presented in the form of long poles or logs. The classifications describe quality classes of round timbers for which the intended use is not known. The classification applies for the following species: Oaks, Quercus sessiliflora SALISB. (or Quercus petraea LIEBL.), Quercus robur L. (or Quercus pedunculata EHRH.) and Beech (Fagus sylvatica L).

This European Standard specifies a qualitative classification and grade designations for felled round timber of oak and beech presented in the form of long poles or logs. The classifications describe quality classes of round timbers for which the intended use is not known. The classification applies for the following species: Oaks, Quercus sessiliflora SALISB. (or Quercus petraea LIEBL.), Quercus robur L. (or Quercus pedunculata EHRH.) and Beech (Fagus sylvatica L).

SIST EN 1316-1:2013 is classified under the following ICS (International Classification for Standards) categories: 79.040 - Wood, sawlogs and sawn timber. The ICS classification helps identify the subject area and facilitates finding related standards.

SIST EN 1316-1:2013 has the following relationships with other standards: It is inter standard links to SIST EN 1316-1:2003. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

SIST EN 1316-1:2013 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Laub-Rundholz - Qualitäts-Sortierung - Teil 1: Eiche und BucheBois ronds feuillus - Classement qualitatif - Partie 1: Chêne et hêtreHardwood round timber - Qualitative classification - Part 1: Oak and beech79.040Les, hlodovina in žagan lesWood, sawlogs and sawn timberICS:Ta slovenski standard je istoveten z:EN 1316-1:2012SIST EN 1316-1:2013en,fr,de01-januar-2013SIST EN 1316-1:2013SLOVENSKI
STANDARDSIST EN 1316-1:20031DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1316-1
October 2012 ICS 79.040 Supersedes EN 1316-1:1997English Version
Hardwood round timber - Qualitative classification - Part 1: Oak and beech
Bois ronds feuillus - Classement qualitatif - Partie 1: Chêne et hêtre
Laub-Rundholz - Qualitäts-Sortierung - Teil 1: Eiche und Buche This European Standard was approved by CEN on 18 August 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1316-1:2012: ESIST EN 1316-1:2013
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...