iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 61395:1999

(Main)

Overhead electrical conductors - Creep test procedures for stranded conductors

Overhead electrical conductors - Creep test procedures for stranded conductors

Is applicable to non-interrupted creep-testing of stranded conductors for overhead lines such as those specified by IEC 61089. Procedures for interpreting the results are also included. The object of the test is principally to calculate creep for any purpose and to compare creep of different conductors.

Leiter für elektrische Freileitungen - Kriechprüfungen für verseilte Leiter

Conducteurs pour lignes électriques aériennes - Procédures d'essai de fluage pour conducteurs câblés

Est applicable aux essais de fluage ininterrompus de conducteurs câblés pour lignes aériennes tels que spécifiés par la CEI 61089. La procédure d'interprétation des résultats est également précisée. L'objet de cet essai est principalement de calculer le fluage pour toutes les applications et de comparer le fluage de différents conducteurs.

Vodniki za nadzemne vode – Preskusni postopki lezenja za pletene vodnike

General Information

Status
Published
Publication Date
31-Oct-1999
ICS
29.240.20 - Power transmission and distribution lines
Technical Committee
GAV - Bare aluminium conductors
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Nov-1999
Due Date
01-Nov-1999
Completion Date
01-Nov-1999
Ref Project
EN 61395:1998 - Overhead electrical conductors - Creep test procedures for stranded conductors

Buy Standard

EN 61395:1999EN 61395:1999
PreviousNext
Standard
EN 61395:1999
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61395:1999
01-november-1999
Vodniki za nadzemne vode – Preskusni postopki lezenja za pletene vodnike
Overhead electrical conductors - Creep test procedures for stranded conductors
Leiter für elektrische Freileitungen - Kriechprüfungen für verseilte Leiter
Conducteurs pour lignes électriques aériennes - Procédures d'essai de fluage pour
conducteurs câblés
Ta slovenski standard je istoveten z: EN 61395:1998
ICS:
29.240.20 Daljnovodi Power transmission and
distribution lines
SIST EN 61395:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61395:1999

---------------------- Page: 2 ----------------------

SIST EN 61395:1999

---------------------- Page: 3 ----------------------

SIST EN
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 62004:2010(Main)
Thermal resistant aluminium alloy wire for overhead line conductor
EN 62004:2009

This European Standard is applicable to thermal-resistant aluminium alloy wires before stranding for manufacture of stranded conductors for overhead lines. It specifies the mechanical, electrical and thermal-resistant properties of wires in the diameter range commercially available.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62420:2009
Concentric lay stranded overhead electrical conductors containing one or more gap(s)
EN 62420:2008

This International Standard specifies the electrical and mechanical characteristics of concentric lay stranded overhead electrical conductors, containing one or more self-supporting aluminium or aluminium alloy layer(s) as depicted in Figure 1, made of combinations of any of the following metal wires: a) hard-drawn aluminium as per IEC 60889, designated A1; b) aluminium alloy type A or B as per IEC 60104, designated A2 or A3; c) thermal resistant aluminium alloy type as per IEC 62004, designated AT1, AT2, AT3 or AT4; d) regular strength steel as per IEC 60888, designated S1A or S1B; e) high strength steel as per IEC 60888, designated S2A or S2B; f) extra-high strength steel as per IEC 60888, designated S3A; g) aluminium-clad steel as per IEC 61232, designated 20SA, 27SA, 30SA or 40SA.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50326:2003(Main)
Conductors for overhead lines - Characteristics of greases
EN 50326:2002

This standard specifies the characteristics of protective products, commonly known as greases, for corrosion protection of bare overhead line conductors made of aluminium, aluminium alloy, steel wires or a combination of these wires.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60889:2002(Main)
Hard-drawn aluminium wire for overhead line conductors
EN 60889:1997

Applies to hand-drawn aluminium wires for the manufacture of stranded conductors for overhead power transmission purposes. Specifies the mechanical and electrical properties of wires in the diameter rank 1.25 mm to 5.00 mm.

  • Standard
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62219:2002(Main)
Overhead electrical conductors - Formed wire, concentric lay, stranded conductors
EN 62219:2002

Specifies the electrical and mechanical characteristics of concentric lay, overhead conductors of wires formed or shaped before, during or after stranding, made of combinations of any of the following metal wires: a) hard aluminium as per EN 60889 designated A1; b) hard aluminium as per EN 60889 designated A1F wire shaped before stranding; c) hard aluminium alloy as per EN 60104 designated A2 or A3; d) hard aluminium alloy as per EN 60104 designated A2F or A3F shaped before stranding; e) regular strength steel, designated S1A or S1B, where A and B are zinc coating classes, corresponding respectively to classes 1 and 2; f) high strength steel, designated S2A or S2B; g) extra high strength steel, designated S3A; h) aluminium clad steel, designated SA.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50189:2000(Main)
Conductors for overhead lines - Zinc coated steel wires
EN 50189:2000

This standard applies to round zinc-coated steel wires used in the construction and/or reinforcement of conductors for overhead power transmission purposes.
It is intended to cover all wires used in constructions where the individual wire diameters, including coating, are in the range of 1,25 mm to 5,50 mm.
Types of wire are designated STyz, where y represents the grade of steel and z represents the class of zinc coating.
To reflect the needs of conductor users, the only combinations of steel grade and zinc coating covered by this standard are ST1A, ST2B, ST3D, ST4A, ST5E and ST6C.
The properties specified are those before stranding.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST IEC 60114:1999(Main)
Recommendation for heat-treated aluminium alloy busbar material of the aluminium-magnesium-silicon type
IEC 60114

Specifies volume resistivity, tensile strength, 0.2 per cent proof stress and elongation after fracture for heat-treated aluminium alloy busbar material of the AI-Mg-Si type.[
]The contents of the corrigendum of January 1959 have been included in this copy.

  • Standard
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST IEC/TR3 61597:1999(Main)
Overhead electrical conductors - Calculation methods for stranded bare conductors
IEC/TR 61597

Provides informations with regards to conductors specified in IEC 61089. Such informations include properties of conductors and useful methods of calculations. It does not discuss all theories and available methods for calculating conductor properties, but provides users with simple methods that provide acceptable accuracies.[
]This publication has the status of a Technical Report - type 3.

  • Technical report
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST IEC 60105:1999(Main)
Recommendation for commercial-purity aluminium busbar material
IEC 60105

Prescribes the electrical properties of commercial-purity aluminium for busbars, regardless of the cross-sectional shape of the bar.

  • Standard
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST IEC 60121:1999(Main)
Recommendation for commercial annealed aluminium electrical conductor wire
IEC 60121

Lays down the electrical resistivity, tensile strength and elongation of commercial annealed aluminium electrical conductor wire having a diameter greater than 1 mm (0.0394 in).

  • Standard
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day