Textiles - Quantitative chemical analysis - Part 28: Mixtures of chitosan with certain other fibres (method using diluted acetic acid)

This document specifies a method, using diluted acetic acid, to determine the mass percentage of chitosan fibres, after elimination of non-fibrous matter, in textiles made of mixtures of: - chitosan fibre with - certain other fibres. This method is applicable to fibre mixtures of chitosan fibre with cellulose fibres (cotton, linen, ramie, viscose, modal, lyocell), protein fibres (wool, cashmere, silk), or synthetic fibres (polyester, polyamide, acrylic).

Textiles — Analyse chimique quantitative — Partie 28: Mélanges de chitosane avec certaines autres fibres (méthode à l'acide acétique dilué)

Le présent document spécifie une méthode de détermination, à l'aide d'acide acétique dilué, de la masse exprimée en pourcentage, après élimination des matières non fibreuses, dans les textiles composés de mélanges de: — fibres de chitosane; avec — certaines autres fibres. Cette méthode s'applique aux mélanges de fibres composés de fibres de chitosane avec des fibres de cellulose (coton, lin, ramie, viscose, modal, lyocell), des fibres protéiniques (laine, cachemire, soie) ou des fibres synthétiques (polyester, polyamide, acrylique).

General Information

Status
Published
Publication Date
04-Jun-2019
Technical Committee
ISO/TC 38 - Textiles
Current Stage
9093 - International Standard confirmed
Start Date
06-Nov-2024
Completion Date
13-Dec-2025

Relations

Effective Date
06-Jun-2022

Overview

ISO 1833-28:2019 specifies a quantitative chemical analysis method for textiles comprising mixtures of chitosan fibres and other fibres, using diluted acetic acid. This international standard provides a standardized laboratory procedure to accurately determine the mass percentage of chitosan fibre content in textile blends after removing non-fibrous matter. Applicable to a wide variety of fibre mixtures, this method supports quality control, compliance verification, and product development in the textile industry.

This method applies specifically to blends of chitosan fibres with cellulose fibres (e.g., cotton, linen, viscose), protein fibres (e.g., wool, silk, cashmere), or synthetic fibres (e.g., polyester, polyamide, acrylic). By dissolving chitosan selectively with diluted acetic acid at elevated temperatures, the residue can be isolated, weighed, and used to calculate chitosan content with high precision.

Key Topics

  • Quantitative Chemical Analysis: Determining mass percentage of chitosan fibres in textile mixtures through a chemical dissolution and gravimetric measurement process.
  • Chitosan Fibre Definition: A fibre derived from chitin with a high degree of deacetylation (typically more than 90%), which is selectively dissolved by diluted acetic acid.
  • Test Procedure: Involves treating a dry sample with diluted acetic acid at 90–95 °C while agitating, filtering the residue, washing, drying, and weighing to calculate the chitosan content.
  • Reagents and Apparatus: Uses diluted acetic acid, diluted ammonia solution, conical flasks, mechanical shaker with water bath, and standard laboratory filtration and drying equipment.
  • Precision and Reliability: Achieves confidence limits within ±1 percentage point at a 95% confidence level, verified by interlaboratory trials across multiple countries.
  • Scope of Fibres: Applicable to mixtures including cellulose fibres (cotton, linen, ramie, viscose, modal, lyocell), protein fibres (wool, cashmere, silk), and synthetic fibres (polyester, polyamide, acrylic).

Applications

  • Textile Quality Control: Ensures accurate quantification of chitosan content in fabrics and yarns, facilitating compliance with product specifications and regulatory requirements.
  • Material Research and Development: Enables researchers to evaluate the composition of chitosan fibre blends and optimize formulations for functional textiles.
  • Sustainability Assessment: Supports the use of natural and bio-based fibres like chitosan by providing reliable compositional data.
  • Trade and Certification: Assists manufacturers and certification bodies in verifying fibre composition claims for labelling and market access.
  • Interlaboratory Consistency: Provides a reproducible and standardized testing method, ensuring consistent results across different laboratories worldwide.

Related Standards

  • ISO 1833-1: General principles of testing methods for quantitative chemical analysis of textiles, providing foundational protocols and terminology used by ISO 1833 series.
  • ISO 2076: Specifies generic names for man-made fibres, including chitin and chitosan fibres.
  • ISO 13528: Statistical methods for proficiency testing, utilized for evaluating precision and reproducibility in testing.
  • ISO 5725-5: Specifies alternate methods to determine accuracy, trueness, and precision of standard measurement methods in laboratory settings.

By adhering to ISO 1833-28:2019, textile testing laboratories and manufacturers can achieve accurate, reproducible analysis of chitosan fibre blends, helping advance innovation and quality in sustainable textile products.

Keywords: ISO 1833-28, chitosan fibre analysis, quantitative chemical analysis, textiles, acetic acid method, fibre mixtures, textile testing standards, chitosan content determination, cellulose fibres, protein fibres, synthetic fibres, textile quality control.

Standard

ISO 1833-28:2019 - Textiles — Quantitative chemical analysis — Part 28: Mixtures of chitosan with certain other fibres (method using diluted acetic acid) Released:6/5/2019

English language
5 pages
sale 15% off
Preview
sale 15% off
Preview
Standard

ISO 1833-28:2019 - Textiles — Analyse chimique quantitative — Partie 28: Mélanges de chitosane avec certaines autres fibres (méthode à l'acide acétique dilué) Released:6/5/2019

French language
5 pages
sale 15% off
Preview
sale 15% off
Preview

Frequently Asked Questions

ISO 1833-28:2019 is a standard published by the International Organization for Standardization (ISO). Its full title is "Textiles - Quantitative chemical analysis - Part 28: Mixtures of chitosan with certain other fibres (method using diluted acetic acid)". This standard covers: This document specifies a method, using diluted acetic acid, to determine the mass percentage of chitosan fibres, after elimination of non-fibrous matter, in textiles made of mixtures of: - chitosan fibre with - certain other fibres. This method is applicable to fibre mixtures of chitosan fibre with cellulose fibres (cotton, linen, ramie, viscose, modal, lyocell), protein fibres (wool, cashmere, silk), or synthetic fibres (polyester, polyamide, acrylic).

This document specifies a method, using diluted acetic acid, to determine the mass percentage of chitosan fibres, after elimination of non-fibrous matter, in textiles made of mixtures of: - chitosan fibre with - certain other fibres. This method is applicable to fibre mixtures of chitosan fibre with cellulose fibres (cotton, linen, ramie, viscose, modal, lyocell), protein fibres (wool, cashmere, silk), or synthetic fibres (polyester, polyamide, acrylic).

ISO 1833-28:2019 is classified under the following ICS (International Classification for Standards) categories: 59.060.01 - Textile fibres in general. The ICS classification helps identify the subject area and facilitates finding related standards.

ISO 1833-28:2019 has the following relationships with other standards: It is inter standard links to ISO 21012:2024. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

ISO 1833-28:2019 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


INTERNATIONAL ISO
STANDARD 1833-28
First edition
2019-06
Textiles — Quantitative chemical
analysis —
Part 28:
Mixtures of chitosan with certain
other fibres (method using diluted
acetic acid)
Textiles — Analyse chimique quantitative —
Partie 28: Mélanges de chitosane avec certaines autres fibres
(méthode à l'acide acétique dilué)
Reference number
©
ISO 2019
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Reagents . 2
6 Apparatus . 2
7 Test procedure . 2
8 Calculation and expression of results . 3
9 Precision . 3
Annex A (informative) Statistic data of interlaboratory trial . 4
Bibliography . 5
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www .iso
.org/iso/foreword .html.
This document was prepared by Technical Committee ISO/TC 38, Textiles.
A list of all parts in the ISO 1833 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/members .html.
iv © ISO 2019 – All rights reserved

INTERNATIONAL STANDARD ISO 1833-28:2019(E)
Textiles — Quantitative chemical analysis —
Part 28:
Mixtures of chitosan with certain other fibres (method
using diluted acetic acid)
1 Scope
This document specifies a method, using diluted acetic acid, to determine the mass percentage of
...


NORME ISO
INTERNATIONALE 1833-28
Première édition
2019-06
Textiles — Analyse chimique
quantitative —
Partie 28:
Mélanges de chitosane avec certaines
autres fibres (méthode à l'acide
acétique dilué)
Textiles — Quantitative chemical analysis —
Part 28: Mixtures of chitosan with certain other fibres (method using
diluted acetic acid)
Numéro de référence
©
ISO 2019
DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2019
Tous droits réservés. Sauf prescription différente ou nécessité dans le contexte de sa mise en œuvre, aucune partie de cette
publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique,
y compris la photocopie, ou la diffusion sur l’internet ou sur un intranet, sans autorisation écrite préalable. Une autorisation peut
être demandée à l’ISO à l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Genève
Tél.: +41 22 749 01 11
Fax: +41 22 749 09 47
E-mail: copyright@iso.org
Web: www.iso.org
Publié en Suisse
ii © ISO 2019 – Tous droits réservés

Sommaire Page
Avant-propos .iv
1 Domaine d’application . 1
2 Références normatives . 1
3 Termes et définitions . 1
4 Principe . 2
5 Réactifs . 2
6 Appareillage . 2
7 Mode opératoire d’essai. 2
8 Calcul et expression des résultats . 3
9 Fidélité . 3
Annexe A (informative) Données statistiques de l’essai interlaboratoires.4
Bibliographie . 5
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale d’organismes
nationaux de normalisation (comités membres de l’ISO). L’élaboration des Normes internationales est
en général confiée aux comités techniques de l’ISO. Chaque comité membre intéressé par une étude
a le droit de faire partie du comité technique créé à cet effet. Les organisations internationales,
gouvernementales et non gouvernementales, en liaison avec l’ISO participent également aux travaux.
L’ISO collabore étroitement avec la Commission électrotechnique internationale (IEC) en ce qui
concerne la normalisation électrotechnique.
Les procédures utilisées pour élaborer le présent document et celles destinées à sa mise à jour sont
décrites dans les Directives ISO/IEC, Partie 1. Il convient, en particulier de prendre note des différents
critères d’approbation requis pour les différents types de documents ISO. Le présent document a été
rédigé conformément aux règles de rédaction données dans les Directives ISO/IEC, Partie 2 (voir www
.iso .org/directives).
L’attention est attirée sur le fait que certains des éléments du présent document peuvent faire l’objet de
droits de propriété intellectuelle ou de droits analogues. L’ISO ne saurait être tenue pour responsable
de ne pas avoir identifié de tels droits de propriété et averti de leur existence. Les détails concernant
les références aux droits de propriété intellectuelle ou autres droits analogues identifiés lors de
l’élaboration du document sont indiqués dans l’Introduction et/ou dans la liste des déclarations de
brevets reçues par l’ISO (voir www .iso .org/brevets).
Les appellations commerciales éventuellement mentionnées dans le présent document sont données
pour information, par souci de commodité, à l’intention des utilisateurs et ne sauraient constituer un
engagement.
Pour une explication de la nature volontaire des normes, la signification des termes et expressions
spécifiques de l’ISO liés à l’évaluation de la conformité, ou pour toute information au sujet de l’adhésion
de l’ISO aux principes de l’Organisation mondiale du commerce (OMC) concernant les obstacles
techniques au commerce (OTC), voir le lien suivant: www .iso .org/iso/fr/avant -propos.
Le présent document a été élaboré par le comité technique ISO/TC 38, Textiles.
Une liste de toutes les parties de la série ISO 1833 se trouve sur le site web de l’ISO.
Il convient que l’utilisateur adresse tout retour d’information ou toute question concernant le présent
document à l’organisme national de normalisation de son pays. Une liste exhaustive desdits organismes
se trouve à l’adresse www .iso .org/fr/members .html.
iv © ISO 2019 – Tous droits réservés

NORME INTERNATIONALE ISO 1833-28:2019(F)
Textiles — Analyse chimique quantitative —
Partie 28:
Mélanges de chitosane avec certaines autres fibres
(méthode à l'acide acétique dilué)
1 Domaine d’application
Le présent document spécifie une méthode de détermination, à l’aide d’acide acétique dilué, de la masse
exprimée en pourcentage, après élimination des matières non fibreuses, dans les textiles composés de
mélanges de:
— fibres de chitosane;
avec
— certaines autres fibres.
Cette méthode s’applique aux mé
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...