ISO 3987:2010/Cor 1:2011
(Corrigendum)Petroleum products - Determination of sulfated ash in lubricating oils and additives - Technical Corrigendum 1
Petroleum products - Determination of sulfated ash in lubricating oils and additives - Technical Corrigendum 1
This International Standard describes a procedure for the determination of the mass percentage of sulfated ash from unused lubricating oils containing additives and from additive concentrates used in compounding. These additives usually contain one or more of the following metals: barium, calcium, magnesium, zinc, potassium, sodium and tin. The elements sulfur, phosphorus and chlorine can also be present in combined form. Application of this procedure to sulfated ash levels below 0,02 % (m/m) is restricted to oils containing ashless additives
Produits pétroliers — Détermination des cendres sulfatées dans les huiles lubrifiantes et additifs — Rectificatif technique 1
Naftni proizvodi - Določevanje sulfatnega pepela v mazalnih oljih in aditivih - Tehnični popravek 1
Ta mednarodni standard opisuje postopek za določevanje masnega odstotka sulfatnega pepela iz neuporabljenih mazalnih olj, ki vsebujejo aditive, in iz koncentratov aditivov, ki se uporabljajo pri mešanju. Ti aditivi običajno vsebujejo eno ali več od naslednjih kovin: barij, kalcij, magnezij, cink, kalij, natrij in kositer. Elementi žveplo, fosfor in klor so tudi lahko prisotni v kombinirani obliki. Uporaba tega postopka za ravni sulfatnega pepela pod 0,02 % (m/m) je omejena na olja, ki vsebujejo aditive brez pepela. Spodnja meja uporabnosti tega postopka je 0,005 % (m/m) sulfatnega pepela. The lower limit of applicability of the procedure is 0,005 % (m/m) sulfated ash.
General Information
- Status
- Published
- Publication Date
- 20-Jan-2011
- Technical Committee
- ISO/TC 28 - Petroleum and related products, fuels and lubricants from natural or synthetic sources
- Drafting Committee
- ISO/TC 28/WG 26 - Physio-chemical and inspection tests
- Current Stage
- 9599 - Withdrawal of International Standard
- Start Date
- 16-Sep-2024
- Completion Date
- 13-Dec-2025
Relations
- Corrects
ISO 3987:2010 - Petroleum products - Determination of sulfated ash in lubricating oils and additives - Effective Date
- 26-Nov-2021
- Effective Date
- 06-May-2023
Frequently Asked Questions
ISO 3987:2010/Cor 1:2011 is a corrigendum published by the International Organization for Standardization (ISO). Its full title is "Petroleum products - Determination of sulfated ash in lubricating oils and additives - Technical Corrigendum 1". This standard covers: This International Standard describes a procedure for the determination of the mass percentage of sulfated ash from unused lubricating oils containing additives and from additive concentrates used in compounding. These additives usually contain one or more of the following metals: barium, calcium, magnesium, zinc, potassium, sodium and tin. The elements sulfur, phosphorus and chlorine can also be present in combined form. Application of this procedure to sulfated ash levels below 0,02 % (m/m) is restricted to oils containing ashless additives
This International Standard describes a procedure for the determination of the mass percentage of sulfated ash from unused lubricating oils containing additives and from additive concentrates used in compounding. These additives usually contain one or more of the following metals: barium, calcium, magnesium, zinc, potassium, sodium and tin. The elements sulfur, phosphorus and chlorine can also be present in combined form. Application of this procedure to sulfated ash levels below 0,02 % (m/m) is restricted to oils containing ashless additives
ISO 3987:2010/Cor 1:2011 is classified under the following ICS (International Classification for Standards) categories: 75.100 - Lubricants, industrial oils and related products. The ICS classification helps identify the subject area and facilitates finding related standards.
ISO 3987:2010/Cor 1:2011 has the following relationships with other standards: It is inter standard links to ISO 3987:2010, ISO 3987:2024. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
ISO 3987:2010/Cor 1:2011 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Produits pétroliers - Détermination des cendres sulfatées dans les huiles lubrifiantes et dans les additifs - RECTIFICATIF TECHNIQUE 1Petroleum products - Determination of sulfated ash in lubricating oils and additives - TECHNICAL CORRIGENDUM 175.100MazivaLubricants, industrial oils and related productsICS:Ta slovenski standard je istoveten z:ISO 3987:2010/Cor 1:2011SIST ISO 3987:2011/Cor 1:2011en01-november-2011SIST ISO 3987:2011/Cor 1:2011SLOVENSKI
STANDARDSIST ISO 3987:19961DGRPHãþD
ICS
75.100 Ref. No. ISO 3987:2010/Cor.1:2011(E)©
ISO 2011 – All rights reserved Published in Switzerland
INTERNATI
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...