ISO 6376:2026
(Main)Carbonaceous materials for the production of aluminium — Pitch for electrodes — Determination of content of toluene-insoluble material
- Abstract
This document specifies a gravimetric method for the determination of the content of toluene-insoluble material in pitch used for the production of aluminium.
- Status
- Published
- Publication Date
- 11-Nov-2026
- Technical Committee
- ISO/TC 226 - Materials for the production of primary aluminium
- Drafting Committee
- ISO/TC 226/WG 1 - Carbonaceous binders, including pitch
- Current Stage
- 6060 - International Standard published
- Start Date
- 12-Nov-2026
- Completion Date
- 12-Nov-2026
ISO 6376:2026 is an International Standard published by ISO for carbonaceous materials used in aluminium production. It specifies a gravimetric method for determining the content of toluene-insoluble material in pitch for electrodes. Laboratories, pitch suppliers and aluminium producers use it when they need a comparable test result for this pitch property.
What does ISO 6376:2026 specify?
ISO 6376:2026 specifies how to measure toluene-insoluble material in pitch used for the production of aluminium. The document focuses on a laboratory test method, then sets out sampling, calculation, precision and reporting so the result can be used consistently in quality control and product assessment.
The document is organized into clauses on:
- scope
- normative references
- principle
- reagents and materials
- apparatus
- sampling
- procedure
- expression of results
- test report
Clause 4 explains the measurement principle, Clauses 5 and 6 cover the required chemicals and equipment, Clause 7 links the test to the sampling standard, and Clauses 8 to 10 cover the test steps, calculation, precision and the information that must be reported.
What are the key requirements of ISO 6376:2026?
ISO 6376:2026 requires a gravimetric determination: the analyst measures the fraction of a pitch test portion that remains insoluble after boiling in toluene. In practice, this means the result depends on careful heating, filtration, drying and weighing, not on a visual judgment.
Sampling and test portion
Clause 7 says sampling is carried out in accordance with ISO 6257. Hard pitches are prepared so they can be tested as a fine powder, while soft pitches are tested as received. Clause 8.1 then calls for a weighed test portion. This matters because the sample condition affects how completely the pitch contacts the solvent.
Reagents, materials and safety
Clause 5 requires reagents of recognized analytical grade and warns about toluene and acetone as flammable and harmful solvents. Clause 8 repeats the need for efficient ventilation during use of toluene. In practice, the laboratory must control ignition sources, ventilation and waste handling before starting the test.
Apparatus
Clause 6 lists the apparatus needed, including a conical flask, reflux condenser, glass filter crucible, Hartley funnel or equivalent, and a controlled oven. Figure 1 gives details of the Hartley funnel. This tells a laboratory what equipment is needed to carry out the method as written.
Test procedure
Clause 8 requires the sample to be dissolved in toluene, boiled under reflux, filtered, rinsed with toluene, then washed with acetone and dried before weighing. The sequence is important because it separates the insoluble material from soluble pitch components and removes solvent before the final mass is taken.
Expression of results and precision
Clause 9 states that the result is expressed as a percentage by mass and gives the calculation method, along with repeatability and reproducibility statements. For users, this is the basis for comparing results within one laboratory and between different laboratories.
Test report
Clause 10 lists the information that must be reported, including the sample identification, reference to ISO 6376:2026, test date, calculated result, deviations from the procedure and unusual observations. This makes the result traceable and easier to audit or compare.
What changed in ISO 6376:2026 from the previous edition?
ISO 6376:2026 cancels and replaces ISO 6376:1980. The foreword states that this second edition has been technically revised, with added analysis procedure details, corrected text to formal SI formatting, and an updated test report description.
Which standards are used with ISO 6376:2026?
ISO 6257 is the only normative reference named in ISO 6376:2026. It provides the sampling method for pitch used in the production of aluminium, so the test starts from a sample taken in a standard way.
What does the ISO 6376:2026 document contain?
ISO 6376:2026 contains the test principle, reagent and safety guidance, apparatus requirements, sampling instructions, a step-by-step reflux and filtration procedure, and the calculation and precision statements needed to report the result. It also includes a test report clause that defines the information to record for traceability.
The document also includes a figure showing the Hartley funnel details and a foreword and introduction that explain ISO preparation, patent awareness and the technical purpose of the method. The introduction links the toluene-insoluble content to quality and likely performance in electrolytic aluminium production.
Relations
- Effective Date
- 04-Nov-2023
Get Certified
Connect with accredited certification bodies for this standard

ECOCERT
Organic and sustainability certification.

Eurofins Food Testing Global
Global leader in food, environment, and pharmaceutical product testing.

Intertek Bangladesh
Intertek certification and testing services in Bangladesh.
Sponsored listings
Frequently Asked Questions
ISO 6376:2026 is a standard published by the International Organization for Standardization (ISO). Its full title is "Carbonaceous materials for the production of aluminium — Pitch for electrodes — Determination of content of toluene-insoluble material". This standard covers: This document specifies a gravimetric method for the determination of the content of toluene-insoluble material in pitch used for the production of aluminium.
This document specifies a gravimetric method for the determination of the content of toluene-insoluble material in pitch used for the production of aluminium.
ISO 6376:2026 is classified under the following ICS (International Classification for Standards) categories: 71.100.10 - Materials for aluminium production. The ICS classification helps identify the subject area and facilitates finding related standards.
ISO 6376:2026 has the following relationships with other standards: It is inter standard links to ISO 6376:1980. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
ISO 6376:2026 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
International
Standard
ISO 6376
Second edition
Carbonaceous materials for the
2026-11
production of aluminium — Pitch
for electrodes — Determination
of content of toluene-insoluble
material
Produits carbonés utilisés pour la production de l'aluminium —
Brais pour électrodes — Détermination du taux des matières
insolubles dans le toluène
Reference number
© ISO 2026
All rights reserved.
This ISO publication is protected by copyright and is owned by ISO and/or its licensors.
The content of this ISO publication is provided under licence, not sold. Use is subject to the applicable licence terms issued by ISO,
an ISO member body, or an authorized third-party distributor.
Except as required for implementation or expressly permitted by a separate licence, no part of this ISO publication may be
reproduced, distributed, modified, used, or made available in any form or by any means – electronic or mechanical, including
photocopying, scanning, recording, or posting on internal or external digital platforms.
Any use beyond the scope of the granted rights is prohibited and may result in legal action.
ISO copyright office
CP 401 • CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Reagents and materials . 1
6 Apparatus . 1
7 Sampling . 3
8 Procedure . 4
8.1 Test portion .4
8.2 Determination .4
9 Expression of results . 4
9.1 Method of calculation .4
9.2 Precision . . .4
10 Test report . 5
iii
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 226, Materials for the production of primary
aluminium.
This second edition can
...



