iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO 7575:1984

(Main)

Road vehicles — Wheels for commercial vehicles — Flat attachment — Fixing nuts

Road vehicles — Wheels for commercial vehicles — Flat attachment — Fixing nuts

Véhicules routiers — Roues pour véhicules utilitaires — Attache plate — Écrous de fixation

General Information

Status
Withdrawn
Publication Date
30-Nov-1984
Withdrawal Date
30-Nov-1984
ICS
43.080 - Commercial vehicles
Technical Committee
ISO/TC 22 - Road vehicles
Drafting Committee
ISO/TC 22 - Road vehicles
Current Stage
9599 - Withdrawal of International Standard
Completion Date
10-Jun-1993
Ref Project

Relations

Revised
ISO 7575:1993 - Commercial road vehicles — Flat attachment wheel fixing nuts
Effective Date
15-Apr-2008

Buy Standard

ISO 7575:1984 - Road vehicles -- Wheels for commercial vehicles -- Flat attachment -- Fixing nutsISO 7575:1984 - Road vehicles -- Wheels for commercial vehicles -- Flat attachment -- Fixing nuts
PreviousNext
Standard
ISO 7575:1984 - Road vehicles -- Wheels for commercial vehicles -- Flat attachment -- Fixing nuts
English language
2 pages
sale 15% off
Preview
sale 15% off
Preview
ISO 7575:1984 - Road vehicles — Wheels for commercial vehicles — Flat attachment — Fixing nuts Released:12/1/1984ISO 7575:1984 - Road vehicles — Wheels for commercial vehicles — Flat attachment — Fixing nuts Released:12/1/1984
PreviousNext
Standard
ISO 7575:1984 - Road vehicles — Wheels for commercial vehicles — Flat attachment — Fixing nuts Released:12/1/1984
French language
2 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

International Standard @ 7575
INTERNATIONAL ORGANIZATION FOR STANDARDIZATIONOMEXAYHAPOflHAR OPTAHH3AUMR il0 CTAHJlAPTH3AUMMWRGANlSATlON INTERNATIONALE DE NORMALISATION
Road vehicles - Wheels for commercial vehicles -
Flat attachment - Fixing nuts
Véhicules routiers - Roues pour véhicules utilitaires - Attache plate - Écrous de fixation
First edition - 1984-12-15
UDC 629.11.012.323 : 629.114.4 Ref. No. IS0 7575-1984 (E)
Descriptors : road vehicles, commercial road vehicles, vehicle wheels, fastenings, nuts (fasteners), hexagonal nuts, dimensions.
Price based on 2 pages

---------------------- Page: 1 ----------------------
Foreword
IS0 (the International Organization for Standardization) is a worldwide federation of
national standards bodies (IS0 member bodies). The work of preparing International
Standards is normally carried out through IS0 technical committees. Each member
body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, govern-
mental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
IS0 procedures requiring at
the IS0 Council. They are approved in accordance with
least 75 % approval by the member bodies voting.
IS0 7575 was prepared by Technical Committee ISO/TC 22,
International Standard
Road vehicles.
0 International Organization for
...

Norme internationale 0 7575
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION.MEX/lYHAPO/lHAfl OPTAHHJAUHA il0 CTAHAAPTH3AL(MH*ORGANlSATlON INTERNATIONALE DE NORMALISATION
(). Véhicules routiers - Roues pour véhicules utilitaires -
Attache plate - Ecrous de fixation
Road vehicles - Wheels for commercial vehicles - Flat attachment - Fixing nuts
Première édition - 1984-12-15
CDU 629.11.012.323 : 629.114.4
Réf, no : IS0 7575-1984 (FI
U: T
2 Descripteurs : véhicule routier, véhicule routier utilitaire, roue de véhicule, dispositif de fixation, écrou, écrou hexagonal, dimension.
L
E
s
Prix basé sur 2 pages

---------------------- Page: 1 ----------------------
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale
d'organismes nationaux de normalisation (comités membres de I'ISO). L'élaboration
des Normes internationales est confiée aux comités techniques de 1'1S0. Chaque
comité membre intéressé par une étude a le droit de faire partie du comité technique
créé à cet effet. Les organisations internationales, gouvernementales et non gouverne-
mentales, en liaison avec I'ISO, participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont soumis
aux comités membres pour approbation, avant leur acceptation comme Normes inter-
nationales par le Conseil de WO. Les Normes internationales sont approuvées confor-
mément aux procédures de VISO qui requièrent l'approbation de 75 % au moins des
comités membres votants.
La Norme internationale IS0 7575 a été élaborée par le comité technique ISO/TC 22,
Véhicules routiers.
@ Organisation internationale de normalisation, 1984 0
Imprimé en Suisse

----------------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO/IEC 9797-1:2011/Amd 1:2023(Amendment)
Information technology — Security techniques — Message Authentication Codes (MACs) — Part 1: Mechanisms using a block cipher — Amendment 1
  • Standard
    1 page
    English language
    sale 15% off
ISO
ISO 20200:2023(Main)
Plastics — Determination of the degree of disintegration of plastic materials under composting conditions in a laboratory-scale test

This document specifies a method of determining the degree of disintegration of plastic materials when exposed to a laboratory-scale composting environment. The method is not applicable to the determination of the biodegradability of plastic materials under composting conditions. Further testing is necessary to be able to claim compostability.

  • Standard
    9 pages
    English language
    sale 15% off
  • Standard
    9 pages
    French language
    sale 15% off
ISO
ISO/TS 24665:2023(Main)
Playground and recreational areas — Framework for the competence of playground inspectors and playground maintenance technicians

This document gives guidance and requirements for the education, examination and evaluation of the inspectors’ and maintenance technicians’ competence concerning public playground and recreational areas. This document describes the knowledge and competence required for each specific task an inspector or technician performs. This document is intended primarily for public playgrounds, but the principles are applicable to other recreational areas. This document does not include benefit/risk assessment methods. This document does not cover the competence of staff conducting product certification. NOTE 1 The different types of inspections covered are: routine visual inspection; operational inspection; annual main inspection; post-installation inspection; post-accident inspection; pre-installation consultation; mid-installation surveillance. NOTE 2 This document can be applicable to: roller-sport infrastructure; multi-sport arenas; outdoor exercise equipment; bouldering walls; portable and permanent socketed goals; parkour facilities; adventure playgrounds; ropes courses; inflatable play equipment.

  • Technical specification
    23 pages
    English language
    sale 15% off
  • Draft
    22 pages
    English language
    sale 15% off
  • Draft
    22 pages
    English language
    sale 15% off
ISO
ISO 19642-1:2023(Main)
Road vehicles — Automotive cables — Part 1: Vocabulary and design guidelines

This document defines terms in the field of cables applied in road vehicle general purpose applications, for use in the other parts of the ISO 19642 series.

  • Standard
    27 pages
    English language
    sale 15% off
ISO
ISO 9241-221:2023(Main)
Ergonomics of human-system interaction — Part 221: Human-centred design process assessment model

This document specifies the process references model (PRM) for human-centred design (HCD) according to ISO 9241-220, as well as the process assessment model (PAM) for assessing these processes, based on ISO/IEC 33020 and in accordance with the requirements of ISO/IEC 33004. This HCD PAM contains a set of indicators to be considered while interpreting the intent of the HCD PRM defined in ISO 9241-220. These indicators can also be applied when implementing a process improvement programme post an assessment. NOTE 1 The PRM in this document focuses on assessing HCD processes rather than system life cycle, for example as in ISO/IEC/IEEE 15288, or software life cycle, as in ISO/IEC/IEEE 12207. NOTE 2 If processes beyond the scope of ISO 9241-220 are required, appropriate processes from other PRMs, such as ISO/IEC/IEEE 12207, ISO/IEC/IEEE 15288 or ISO/TS 18152, can be added based on the business needs of the organization. The intended application of this document is computer-based interactive systems. While the processes apply to interactive systems that deliver services, they do not cover the design of those services. The relevant aspects of the processes can also be applied to simple or non-computer-based interactive systems. NOTE 3 HCD concentrates on the human-centred aspects of design and not on other aspects of design, such as mechanical construction, programming or the basic design of services. The process descriptions in this document provide the basis for a rigorous assessment of an enterprise’s capability to carry out human-centred processes in conformity with the ISO/IEC 33004 and ISO/IEC 33020. This document is intended for use by organizations that want to address and improve their treatment of human-centred design of either their internal systems or the products and services they provide, and the procurement of systems and parts of systems. The processes can be applied by small- and medium-sized enterprises as well as by large organizations. NOTE 4 The scope of application of the PAM is the same as that of the PRM, which is described in ISO 9241-220:2019, Clause 1.

  • Standard
    102 pages
    English language
    sale 15% off
ISO
ISO 23316-7:2023(Main)
Tractors and machinery for agriculture and forestry — Electrical high-power interface 700 V DC / 480 V AC — Part 7: Mechanical integration

This document instructs the manufacturers of tractors and implements how to integrate mechanically and use the HPI. NOTE The terms "tractor" and "implement” are used instead of “supply system” and “consumer system” for better understanding in this part.

  • Standard
    5 pages
    English language
    sale 15% off
ISO
ISO 10300-3:2023(Main)
Calculation of load capacity of bevel gears — Part 3: Calculation of tooth root strength

This document specifies the fundamental formulae for use in the tooth root stress calculation of straight and helical (skew), Zerol and spiral bevel gears including hypoid gears, with a minimum rim thickness under the root of 3,5 mmn. All load influences on tooth root stress are included, insofar as they are the result of load transmitted by the gearing and able to be evaluated quantitatively. Stresses, such as those caused by the shrink fitting of gear rims, which are superposed on stresses due to tooth loading, are intended to be considered in the calculation of the tooth root stress, σF, or the permissible tooth root stress σFP. This document is not applicable in the assessment of tooth flank fracture. The formulae in this document are based on virtual cylindrical gears and restricted to bevel gears whose virtual cylindrical gears have transverse contact ratios of εvα This document does not apply to stress levels above those permitted for 103 cycles, as stresses in that range can exceed the elastic limit of the gear tooth. NOTE This document is not applicable to bevel gears which have an inadequate contact pattern under load. The user is cautioned that when the formulae are used for large average mean spiral angles (βm1 + βm2)/2 > 45°, for effective pressure angles αe > 30° and/or for large facewidths b > 13 mmn, the calculated results of this document should be confirmed by experience.

  • Standard
    43 pages
    English language
    sale 15% off
ISO
ISO 5714:2023(Main)
Clean cookstoves and clean cooking solutions — Test protocols for institutional cookstoves

This document provides testing methods to evaluate the energy performance, emissions, safety and durability of institutional cookstoves. For general guidance (not a requirement), institutional cookstoves typically have firepower greater than 10 kW and/or cooking vessel volume greater than 25 l. The evaluation of household cookstoves is covered in ISO19867-1 and ISO19869 and is not addressed in this document. This document provides the following: — quantitative and qualitative measurements of performance and safety of institutional cookstoves – methods include uncontrolled and controlled cooking tests; — guidance for the measurement of air pollution, and; — guidance for prioritizing measurements that balance comprehensiveness and feasibility. This document includes testing methods for energy performance, emissions and durability that are applicable to institutional cookstoves that burn solid, liquid, and gaseous fuels and for energy performance, safety and durability that are applicable to institutional cookstoves powered by solar thermal energy. Safety testing methods are applicable to institutional solar cookstoves and cookstoves that burn solid fuels and are not applicable to cookstoves that burn liquid or gaseous fuels, such as LPG (liquefied petroleum gas), alcohol, plant oil or kerosene. Safety evaluation of gas-fuelled cookstoves can be found in ISO 23550 and the ISO 23551 series. Safety evaluation of liquid-fuelled cookstoves is not found in existing ISO standards. This document is not applicable to electric cookstoves.

  • Standard
    17 pages
    English language
    sale 15% off
ISO
ISO 10300-2:2023(Main)
Calculation of load capacity of bevel gears — Part 2: Calculation of surface durability (macropitting)

This document specifies the methods of calculation of the load capacity of bevel gears, the formulae and symbols used for calculation, and the general factors influencing load conditions. The formulae in this document are intended to establish uniformly acceptable methods for calculating the load-carrying capacity of straight, helical (skew), spiral bevel, Zerol and hypoid gears. They are applicable equally to tapered depth and uniform depth teeth. Hereinafter, the term “bevel gear” refers to all of the gear types; if not, the specific forms are identified. The formulae in this document take into account the known major factors influencing load-carrying capacity. The rating formulae are only applicable to types of gear tooth deterioration, that are specifically addressed in the individual parts of the ISO 10300 series. Rating systems for a particular type of bevel gears can be established by selecting proper values for the factors used in the general formulae. NOTE This document is not applicable to bevel gears which have an inadequate contact pattern under load (see Annex D). The rating system of this document is based on virtual cylindrical gears and restricted to bevel gears whose virtual cylindrical gears have transverse contact ratios of εvα The user is cautioned that when the formulae are used for large average mean spiral angles (βm1 + βm2)/2 > 45°, for effective pressure angles αe > 30° and/or for large facewidths b > 13 mmn, the calculated results of this document should be confirmed by experience.

  • Standard
    35 pages
    English language
    sale 15% off
ISO
ISO 22574:2023(Main)
Road vehicles — Brake linings friction materials — Visual inspection

This document defines visual aspects for the identification and assessment of product characteristics for friction materials in terms of quality and for commercial and technical agreements. The sequence of the product characteristics represents no order of priority. Inspection is carried out in unused, “as supplied” condition. In some characteristic features, there are differences between brake linings with an effective lining pad area less than 120 cm2 and larger than 120 cm2. The acceptance criteria ensure exclusion of any characteristics that could impact the function and performance of brake linings and applies unless other agreements between the customer and the supplier.

  • Standard
    35 pages
    English language
    sale 15% off