ISO 20247:2018
(Main)Information and documentation — International library item identifier(ILII)
Information and documentation — International library item identifier(ILII)
ISO 20247:2018 specifies the International Library Item Identifier (ILII), which is used for the unique identification of items held by libraries and related organizations. "Library and related organization" here refers to an organization within the scope of ISO 15511. "Items" here refer to materials identified and managed by a concerned organization. The purpose of ILII is to facilitate unique identification of library items when information about them is shared among library applications. Examples of such system(s) include interlibrary loans and shared print agreements.
Information et documentation — Identifiant international des documents de bibliothèque (ILII)
Informatika in dokumentacija - Mednarodna identifikacijska točka knjižnic (ILII)
Ta mednarodni standard podaja mednarodno identifikacijsko točko knjižnic (ILII), ki se uporablja za enolično identifikacijo elementov, ki se hranijo v knjižnicah in sorodnih organizacijah. Knjižnica in sorodna organizacija se tukaj nanašata na organizacijo na področju uporabe standarda ISO 15511, Informatika in dokumentacija - Mednarodni standardni identifikator za knjižnice in sorodne organizacije (ISIL) Elementi se tukaj nanašajo na materiale, ki jih identificira in upravlja zadevna organizacija. Digitalni objekti, do katerih ima organizacija samo pravice dostopa (npr. elektronske revije), so izključeni iz definicije elementov v tem kontekstu.
Namen identifikatorjev ILII je omogočiti enolično identifikacijo knjižničnih elementov, kadar so informacije o njih v skupni rabi med knjižničnimi aplikacijami. Primeri takih sistemov zajemajo medknjižnično izposojo in skupne pogodbe za tiskanje.
General Information
Buy Standard
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 20247
First edition
2018-01
Information and documentation —
International library item
identifier(ILII)
Information et documentation — Identifiant de document de
bibliothèque international (ILII)
Reference number
ISO 20247:2018(E)
©
ISO 2018
---------------------- Page: 1 ----------------------
ISO 20247:2018(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 20247:2018(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Structure and syntax of ILII . 2
4.1 Structure of ILII . 2
4.2 ISIL . 2
4.3 ISCI. 2
4.3.1 Structure of ISCI . 2
4.3.2 Full stop, percent sign escaping process . 2
4.4 Item identifier . 3
4.4.1 Syntax of item identifier . 3
4.4.2 Assignment of item identifier . 3
4.4.3 Granularity of the item . 3
4.5 Character usage recommendation . 3
5 Administration . 3
5.1 Persistence. 3
5.2 Transfer of an item . 3
Bibliography . 4
© ISO 2018 – All rights reserved iii
---------------------- Page: 3 ----------------------
ISO 20247:2018(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: www .iso .org/ iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 46, Information and documentation,
Subcommittee SC 9, Identification and description.
iv © ISO 2018 – All rights reserved
---------------------- Page: 4 ----------------------
ISO 20247:2018(E)
Introduction
This document was developed to provide a standard way to represent an item in various kinds of
applications in libraries or related organizations. Usually, libraries have local identification systems
for the items they hold. But when an item is handled beyond the boundary of the library, for example
in an interlibrary loan transaction, local identification systems do not continue to function for the
overall identification of the item. This document is intended to be used in systems in which items are
manipulated beyond the owning institution.
It is true that the combination of the library identifier and its local item identifier generall
...
SLOVENSKI STANDARD
SIST ISO 20247:2018
01-september-2018
,QIRUPDWLNDLQGRNXPHQWDFLMD0HGQDURGQDLGHQWLILNDFLMVNDWRþNDNQMLåQLF ,/,,
Information and documentation -- International library item identifier(ILII)
Information et documentation — Identifiant de document de bibliothèque international
(ILII)
Ta slovenski standard je istoveten z: ISO 20247:2018
ICS:
01.140.20 Informacijske vede Information sciences
SIST ISO 20247:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST ISO 20247:2018
---------------------- Page: 2 ----------------------
SIST ISO 20247:2018
INTERNATIONAL ISO
STANDARD 20247
First edition
2018-01
Information and documentation —
International library item
identifier(ILII)
Information et documentation — Identifiant de document de
bibliothèque international (ILII)
Reference number
ISO 20247:2018(E)
©
ISO 2018
---------------------- Page: 3 ----------------------
SIST ISO 20247:2018
ISO 20247:2018(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved
---------------------- Page: 4 ----------------------
SIST ISO 20247:2018
ISO 20247:2018(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Structure and syntax of ILII . 2
4.1 Structure of ILII . 2
4.2 ISIL . 2
4.3 ISCI. 2
4.3.1 Structure of ISCI . 2
4.3.2 Full stop, percent sign escaping process . 2
4.4 Item identifier . 3
4.4.1 Syntax of item identifier . 3
4.4.2 Assignment of item identifier . 3
4.4.3 Granularity of the item . 3
4.5 Character usage recommendation . 3
5 Administration . 3
5.1 Persistence. 3
5.2 Transfer of an item . 3
Bibliography . 4
© ISO 2018 – All rights reserved iii
---------------------- Page: 5 ----------------------
SIST ISO 20247:2018
ISO 20247:2018(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: www .iso .org/ iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 46, Information and documentation,
Subcommittee SC 9, Identification and description.
iv © ISO 2018 – All rights reserved
---------------------- Page: 6 ----------------------
SIST ISO 20247:2018
ISO 20247:2018(E)
Introduction
This document was developed to provide a standard way to represent an item in various kinds of
applications in libraries or related organizations. Usually, libraries have local identification systems
for the items they hold. But when an item is handled beyond
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.