ISO 13542:2006
(Main)Paper and board - Specification for internal diameters of cores for reels
Paper and board - Specification for internal diameters of cores for reels
ISO 13542:2006 specifies the internal diameters and tolerances for cores recommended for general use with reels of paper and board in international trade.
Papier et carton — Spécification des diamètres intérieurs des mandrins pour bobines
L'ISO 13542:2006 spécifie les diamètres intérieurs, avec leurs tolérances, des mandrins recommandés pour usage général avec des bobines de papier et de carton dans le commerce international.
General Information
- Status
- Published
- Publication Date
- 18-Oct-2006
- Technical Committee
- ISO/TC 6 - Paper, board and pulps
- Drafting Committee
- ISO/TC 6/WG 7 - Cores for reels of paper
- Current Stage
- 9093 - International Standard confirmed
- Start Date
- 06-Jul-2021
- Completion Date
- 13-Dec-2025
Relations
- Effective Date
- 15-Apr-2008
Overview
ISO 13542:2006 is an international standard published by the International Organization for Standardization (ISO) that specifies the internal diameters and tolerances for cores used in reels of paper and board. This standard aims to ensure consistency and reliability in the manufacturing and trade of paper and board reels globally. By providing exact dimensions for core internal diameters, ISO 13542:2006 facilitates compatibility between paper reels and machinery, supporting smooth handling and processing in various industries.
Key Topics
- Internal Diameter Specifications: ISO 13542:2006 defines nominal internal diameters for cores ranging from 10 mm to 70 mm and beyond, along with the permissible tolerances for each size. These dimensions are critical for ensuring that reels fit correctly onto equipment like unwinders and rewinders.
- Tolerance Limits: The standard specifies precise tolerance limits to maintain quality and interchangeability. For example, cores with internal diameters less than 70 mm have a maximum difference of 0.5 mm between any two perpendicular diameters, while those 70 mm or larger allow up to 1.5 mm.
- Measurement Methodology: Measurements must be performed following ISO 11093-4, which details testing methods for core dimensions, ensuring accuracy and repeatability.
- Reporting Requirements: Reports generated during core inspection must reference ISO 13542 and the measurement protocol ISO 11093-4 to certify compliance and provide traceability.
Applications
ISO 13542:2006 is essential for manufacturers, suppliers, and users of paper and board reels globally, particularly in sectors including:
- Paper Manufacturing and Converting: Ensures that cores used for winding paper and board rolls meet standardized sizes for compatibility with production lines and packaging machines.
- Printing Industry: Guarantees that reel cores fit printing presses and finishing equipment, minimizing downtime due to incompatibility.
- Logistics and Storage: Provides standard dimensions that facilitate stacking, handling, and transport of paper reels safely and efficiently within supply chains.
- International Trade: Supports uniformity in export and import of reels by mandating standardized core sizes, reducing disputes and improving trade efficiency.
Related Standards
- ISO 11093-4: Paper and board - Testing of cores - Part 4: Measurement of dimensions. This standard complements ISO 13542 by specifying the methods for measuring core dimensions accurately.
- ISO/TC 6 Technical Committee: The committee responsible for developing paper and board standards, ensuring alignment across related product specifications and testing procedures.
By adhering to ISO 13542:2006, industries involved in paper and board production and trade can achieve standardized core dimensions that ensure operational efficiency, equipment compatibility, and global supply chain smoothness. This standard supports quality assurance and facilitates international commerce by defining clear size and tolerance requirements for reel cores.
ISO 13542:2006 - Paper and board -- Specification for internal diameters of cores for reels
ISO 13542:2006 - Papier et carton -- Spécification des diametres intérieurs des mandrins pour bobines
Frequently Asked Questions
ISO 13542:2006 is a standard published by the International Organization for Standardization (ISO). Its full title is "Paper and board - Specification for internal diameters of cores for reels". This standard covers: ISO 13542:2006 specifies the internal diameters and tolerances for cores recommended for general use with reels of paper and board in international trade.
ISO 13542:2006 specifies the internal diameters and tolerances for cores recommended for general use with reels of paper and board in international trade.
ISO 13542:2006 is classified under the following ICS (International Classification for Standards) categories: 85.060 - Paper and board. The ICS classification helps identify the subject area and facilitates finding related standards.
ISO 13542:2006 has the following relationships with other standards: It is inter standard links to ISO 13542:1995. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase ISO 13542:2006 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of ISO standards.
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 13542
Second edition
2006-11-01
Paper and board — Specification for
internal diameters of cores for reels
Papier et carton — Spécification des diamètres intérieurs des mandrins
pour bobines
Reference number
©
ISO 2006
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2006 – All rights reserved
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical
...
NORME ISO
INTERNATIONALE 13542
Deuxième édition
2006-11-01
Papier et carton — Spécification des
diamètres intérieurs des mandrins pour
bobines
Paper and board — Specification for internal diameters of cores for
reels
Numéro de référence
©
ISO 2006
PDF – Exonération de responsabilité
Le présent fichier PDF peut contenir des polices de caractères intégrées. Conformément aux conditions de licence d'Adobe, ce fichier
peut être imprimé ou visualisé, mais ne doit pas être modifié à moins que l'ordinateur employé à cet effet ne bénéficie d'une licence
autorisant l'utilisation de ces polices et que celles-ci y soient installées. Lors du téléchargement de ce fichier, les parties concernées
acceptent de fait la responsabilité de ne pas enfreindre les conditions de licence d'Adobe. Le Secrétariat central de l'ISO décline toute
responsabilité en la matière.
Adobe est une marque déposée d'Adobe Systems Incorporated.
Les détails relatifs aux produits logiciels utilisés pour la création du présent fichier PDF sont disponibles dans la rubrique General Info
du fichier; les paramètres de création PDF ont été optimisés pour l'impression. Toutes les mesures ont été prises pour garantir
l'exploitation de ce fichier par les comités membres de l'ISO. Dans le cas peu probable où surviendrait un problème d'utilisation,
veuillez en informer le Secrétariat central à l'adresse donnée ci-dessous.
© ISO 2006
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publication ne peut être reproduite ni utilisée sous
quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit
de l'ISO à l'adresse ci-après ou du comité membre de l'ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax. + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Publié en Suisse
ii © ISO 2006 – Tous droits réservés
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes nationaux de
normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est en général confiée
aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude a le droit de faire partie du
comité technique créé à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec l'ISO participent également aux travaux. L'ISO collabore étroitement avec
la Commission électrotechnique internationale (CEI) en ce qui concerne la normalisation électrotechnique.
Les Normes internationales sont rédigées conformément aux règles données dans les Directives ISO/CEI,
Partie 2.
La tâche principale des comités t
...
МЕЖДУНАРОДНЫЙ ISO
СТАНДАРТ 13542
Второе издание
2006-11-01
Бумага и картон. Технические условия
на внутренние диаметры гильз для
рулонов
Paper and board – Specification for internal diameters of cores for reels
Ответственность за подготовку русской версии несёт GOST R
(Российская Федерация) в соответствии со статьёй 18.1 Устава ISO
Ссылочный номер
©
ISO 2006
Отказ от ответственности при работе в PDF
Настоящий файл PDF может содержать интегрированные шрифты. В соответствии с условиями лицензирования, принятыми
фирмой Adobe, этот файл можно распечатать или смотреть на экране, но его нельзя изменить, пока не будет получена
лицензия на интегрированные шрифты и они не будут установлены на компьютере, на котором ведется редактирование. В
случае загрузки настоящего файла заинтересованные стороны принимают на себя ответственность за соблюдение
лицензионных условий фирмы Adobe. Центральный секретариат ISO не несет никакой ответственности в этом отношении.
Adobe — торговый знак фирмы Adobe Systems Incorporated.
Подробности, относящиеся к программным продуктам, использованные для создания настоящего файла PDF, можно найти в
рубрике General Info файла; параметры создания PDF были оптимизированы для печати. Были приняты во внимание все
меры предосторожности с тем, чтобы обеспечить пригодность настоящего файла для использования комитетами-членами
ISO. В редких случаях возникновения проблемы, связанной со сказанным выше, просьба проинформировать Центральный
секретариат по адресу, приведенному ниже.
ДОКУМЕНТ ЗАЩИЩЕН АВТОРСКИМ ПРАВОМ
© ISO 2006
Все права сохраняются. Если не указано иное, никакую часть настоящей публикации нельзя копировать или использовать в
какой-либо форме или каким-либо электронным или механическим способом, включая фотокопии и микрофильмы, без
предварительного письменного согласия ISO, которое должно быть получено после запроса о разрешении, направленного по
адресу, приведенному ниже, или в комитет-член ISO в стране запрашивающей стороны.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Опубликовано в Швейцарии
ii © ISO 2006 – Все права сохраняются
Предисловие
Международная организация по стандартизации (ISO) является всемирной федерацией национальных
организаций по стандартизации (комитетов-членов ISO). Разработка международных стандартов
обычно осуществляется техническими комитетами ISO. Каждый комитет-член, заинтересованный в
деятельности, для которой был создан технический комитет, имеет право быть представленным в этом
комитете. Международные правительственные и неправительственные организации, имеющие связи с
ISO, также принимают участие в этой работе. ISO работает в тесном сотрудничестве с Международной
электротехнической комиссией (IEC) по всем вопросам стандартиза
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...