iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO/TS 10303-1352:2006

(Main)

Industrial automation systems and integration — Product data representation and exchange — Part 1352: Application module: Catalog data information and shape representation

Industrial automation systems and integration — Product data representation and exchange — Part 1352: Application module: Catalog data information and shape representation

ISO/TS 10303-1352:2006 specifies the application module for Catalog data information and shape representation. The following are within the scope of ISO/TS 10303-1352:2006: representation of catalog product data definition; supporting of catalog product stucture; possibility of variants and options for product representations; products classification and products specification associated control; product dimensions; price lists based on products identification and associated characteristics; product configuration based on diferent characteristics; multi-language support; approval status of the products; effectivity for data validation; documents definition and assignment; product identified by its manufacturing configuration; product geometry including advanced boundary representation, faceted boundary representation, manifold surfaces with topology, geometrically bounded surface, geometrically bounded wireframe 2d and 3d geometry, wireframe with topology, and constructive solid geometry; product geometric validation properties, for the assessment of the quality of conversions that occur in a transfer of geometric data; surface conditions; geometric tolerance.

Systèmes d'automatisation industrielle et intégration — Représentation et échange de données de produits — Partie 1352: Module d'application: Informations de données de catalogue et représentation de formes

General Information

Status
Published
Publication Date
11-Dec-2006
ICS
25.040.40 - Industrial process measurement and control
Technical Committee
ISO/TC 184/SC 4 - Industrial data
Drafting Committee
ISO/TC 184/SC 4/WG 12 - STEP product modelling and resources
Current Stage
9093 - International Standard confirmed
Completion Date
04-Dec-2023
Ref Project

Buy Standard

ISO/TS 10303-1352:2006 - Industrial automation systems and integration -- Product data representation and exchangeISO/TS 10303-1352:2006 - Industrial automation systems and integration -- Product data representation and exchange
PreviousNext
Technical specification
ISO/TS 10303-1352:2006 - Industrial automation systems and integration -- Product data representation and exchange
English language
78 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 10303-236
and
Application
modules

Industrial automation systems and
integration — Product data
representation and exchange
Part 236:
Application protocol: Furniture catalog
and interior design
and Application modules
Systèmes d'automatisation industrielle et intégration — Représentation
et échange de données de produits
Partie 236: Protocole d'application: Catalogue de meubles et décoration
d'intérieur
et Modules d'application




Reference number
ISO 10303-236:2006(E)
and Application modules
©
ISO 2006

---------------------- Page: 1 ----------------------
ISO 10303-236:2006(E) and Application modules


ISO 10303 (STEP) supports many different product information exchange and sharing scenarios which
contain common information requirements.
The STEP application modules contain reusable data models for key collections of product information within
ISO 10303, which can be combined to support information exchange for different business scenarios. By
reusing these models, users will save the cost of remodelling common information structures, and can be
assured of interoperable data exchange processes.
This CD-ROM contains
⎯ ISO 10303-236:2006 which specifies the use of the integrated resources necessary for the scope and
information requirements for furniture catalog and interior design;
⎯ 6 application modules in HTML format, forming part of the ISO 10303 (STEP) series of documents. Each
application module is published as a separate part: 436, 1351, 1352, 1353, 1354 and 1355.
The application modules will also be used in other STEP parts currently under development, and are available
for developers to use as core information models for product data.
All parts are first editions.

©  ISO 2006
All rights reserved. Unless otherwise specified, no part of this CD-ROM may be reproduced, stored in a retrieval system or transmitted in
any form or by any means without prior permission from ISO. Requests for permission to reproduce this product should be addressed to
IS
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO/TR 20123:2023(Main)
Automation systems and integration — Industrial data — Nuclear digital ecosystem specifications

This document provides: — a review and summary of the adoption of digital methods and technology in the national nuclear sectors; — a summary of the state of the art of some of the standards supporting the digital representation and interoperability of industrial data; — orientation on the use of these standards for model-based systems engineering (MBSE) in order to achieve a nuclear digital ecosystem (NDE); — a high-level roadmap of the stages by which this ecosystem can be achieved, taking into account the maturity of the actors of the ecosystem, their relationships and the added value of using advanced standards. NOTE The complete reports from the participating entities are presented in Annexes A to G. This document includes the following: — the systems composing the nuclear facilities and their input, output, and other products resulting from interactions in the nuclear system or with its environment; — the material accounting and the corresponding requirements; — waste management: all types of nuclear waste produced during processes and activities, and their properties are considered for a seamless management of information in the whole value chain of the nuclear ecosystem.

  • Technical report
    87 pages
    English language
    sale 15% off
  • Draft
    87 pages
    English language
    sale 15% off
  • Draft
    87 pages
    English language
    sale 15% off
ISO
ISO/TR 3151-1:2023(Main)
Visualization elements of PLM-MES interface — Part 1: Overview

This document outlines the visualization elements for data exchange between the Product Lifecycle Management and Manufacturing Execution System (PLM-MES) or Manufacturing Operations Management (MOM). The following are within the scope of this document: — the need for a PLM-MES interface; — the technical elements that make up the PLM-MES interface; — the visualization elements of the PLM-MES interface. The following is outside the scope of this document: — application of the PLM-MES interface and its visualization elements.

  • Technical report
    29 pages
    English language
    sale 15% off
  • Draft
    29 pages
    English language
    sale 15% off
  • Draft
    29 pages
    English language
    sale 15% off
ISO
ISO/TS 15926-11:2023(Main)
Industrial automation systems and integration — Integration of life-cycle data for process plants including oil and gas production facilities — Part 11: Simplified industrial usage of reference data based on RDFS methodology

This document enables a flexible creation of product knowledge models and data that supports systems engineering processes. The payload or design data can be exchanged across organizations or with the supply chain by combining resource description framework (RDF) triples, reference data dictionaries and a standardized set of relationships. This document is appropriate for use with the ISO 15926-series based reference data libraries, and it is applicable to the process industry, including oil, gas and power. However, manufacturing and aerospace industries can also benefit from this document. The following are within the scope of this document: — process plants in accordance with ISO 15926-1; — a methodology with low threshold for using reference data in combination with RDF triples for representing statements as defined in the ISO 15926 series; — an initial set of relationships required for process plant life-cycle representation; — a method to implement configuration management to trace back additions, changes and deletions in product and project data and enabling baselining; — data sharing, integration, exchange, and hand-over between computer systems. The following are outside the scope of this document: — serialisation methods; — definition of reference data libraries; — the syntax and format of implementations of either product data models or instance data using this document, or both; — any specific methods and guidelines other than RDF(S) for implementing ISO 15926-2.

  • Technical specification
    72 pages
    English language
    sale 15% off
  • Draft
    71 pages
    English language
    sale 15% off
  • Draft
    71 pages
    English language
    sale 15% off
ISO
ISO 8000-117:2023(Main)
Data quality — Part 117: Application of ISO 8000-115 to identifiers in distributed ledgers including blockchains

This document specifies requirements for using identifiers in distributed ledgers including blockchains. These requirements supplement those of ISO 8000-115. The following are within the scope of this document: — requirements for each identifier in distributed ledgers including blockchains, where the ledger enables supply chains to exchange transaction data; — requirements for the off‑ledger data set that is referenced by an identifier in a distributed ledger; — off-ledger data sets that consist only of property-value tuples, where each tuple is the result of semantic encoding. The following are outside the scope of this document: — requirements for implementing distributed ledger technology including blockchains; — requirements for technology to ensure immutability of data sets; — requirements for the processes of creating identifiers; — requirements for the processes of creating the content of off‑ledger data sets; — requirements for the processes of creating immutable data sets.

  • Standard
    7 pages
    English language
    sale 15% off
  • Draft
    7 pages
    English language
    sale 15% off
  • Draft
    7 pages
    English language
    sale 15% off
ISO
ISO 8000-51:2023(Main)
Data quality — Part 51: Data governance: Exchange of data policy statements

This document specifies requirements that support the exchange of data governance policy statements and automated conformance testing of data sets to the data specifications referenced by policy statements. The following are within the scope of this document: — requirements for the syntax and semantics of identifiers for organizations issuing data governance policy statements; — requirements for the syntax and semantics of identifiers for data governance policy statements; — data specifications referenced by data governance policy statements, where those specifications are computer processable. The following are outside the scope of this document: — general processes, roles and responsibilities for performing data governance; EXAMPLE An approach to data governance is covered by ISO/IEC 38505-1 and ISO/IEC TR 38505-2. — requirements for the syntax and semantics of data specifications referenced by a data governance policy statement; — requirements for the syntax and semantics of data governance policy statements; — methods used for the creation of data governance policy statements; — methods used for measuring conformance with the requirements referenced by data governance policy statements; — methods used for monitoring conformance with the requirements referenced by data governance policy statements.

  • Standard
    8 pages
    English language
    sale 15% off
  • Draft
    8 pages
    English language
    sale 15% off
  • Draft
    8 pages
    English language
    sale 15% off
ISO
ISO 8000-2:2022(Main)
Data quality — Part 2: Vocabulary

This document defines terms relating to data quality. These terms are used by the parts in the ISO 8000 series.

  • Standard
    25 pages
    English language
    sale 15% off
  • Draft
    25 pages
    English language
    sale 15% off
  • Draft
    25 pages
    English language
    sale 15% off
ISO
ISO/TS 8000-82:2022(Main)
Data quality — Part 82: Data quality assessment: Creating data rules

This document describes how data rules apply to various types of data. Such rules exist to sustain the integrity and reliability of data by capturing requirements into a form that can be processed by databases and other information systems. The following are within the scope of this document: — fundamental concepts of data rules; — key characteristics of data rules for common types of data, where these types are identifier, currency value, quantity, date or time, rate, free‑text entry, code and key; — how data profiling contributes to formulating effective data rules. The following is outside the scope of this document: — specific rules for specific sets of data. This document can be used in conjunction with or independently of standards for quality management systems. EXAMPLE 1 ISO 9001 specifies requirements for quality management systems. This document can also be used in conjunction with or independently of standards for more detailed definitions of data types. EXAMPLE 2 ISO/IEC 11404 specifies the nomenclature and shared semantics for a collection of datatypes commonly occurring in programming languages and software interfaces. EXAMPLE 3 IEC 61360‑1 specifies principles for the definition of the properties and associated attributes and explains the methods for representing verbally defined concepts.

  • Technical specification
    8 pages
    English language
    sale 15% off
ISO
ISO 8000-64:2022(Main)
Data quality — Part 64: Data quality management: Organizational process maturity assessment: Application of the Test Process Improvement method

This document specifies how to apply the Test Process Improvement method to the assessment of organizational process maturity. This document refines the language in the method, which has an original purpose of more than just data quality management. This document supports improving data quality management when an organization uses the process reference model in ISO 8000‑61 as the foundation for specifying the measurement goals for the process measurement necessary when performing maturity assessment. The following are within scope of this document: — the relationship between the Test Process Improvement method[11][12] and the procedure for assessing process maturity of data quality management as specified by ISO 8000‑61; — the role of process measurement in accordance with ISO 8000‑63 when performing assessment of process maturity; — the outputs from the procedure. The following are outside the scope of this document: — the purpose, outcomes and activities of processes for data quality management; — specific content for the scope of individual quality management areas, the maturity levels and the maturity level targets; — specific content for each inspection order including the frequency of inspection points; — instructions on how to develop a process improvement strategy in response to the outputs of the procedure. This document can be used in conjunction with or independently of quality management systems standards.

  • Standard
    15 pages
    English language
    sale 15% off
ISO
ISO 8000-150:2022(Main)
Data quality — Part 150: Data quality management: Roles and responsibilities

This document specifies the key considerations for organizations that are establishing appropriate roles and responsibilities for data quality management. The following are within the scope of this document: — implementing roles and responsibilities for data quality management; — providing documentary evidence of this implementation; — a framework for roles and responsibilities; — a functional model of roles and responsibilities; — example deployment scenarios for the framework of roles and responsibilities; — comparison with the processes specified by ISO 8000‑61. The following are outside the scope of this document: — process reference models for data quality management (ISO 8000‑61 specifies a process reference model for data quality management); — methods for data quality evaluation and certification; — models for assessing the maturity of data quality management (ISO 8000‑62 and ISO 8000‑64 specify approaches to assessing the maturity of data quality management). This document can be used in conjunction with or independently of standards for quality management systems.

  • Standard
    28 pages
    English language
    sale 15% off
ISO
ISO 8000-1:2022(Main)
Data quality — Part 1: Overview

This document provides an overview of the ISO 8000 series. The following are within the scope of this document: — stating the scope of the ISO 8000 series as a whole; — establishing the principles of information and data quality; — describing the path to data quality; — describing the structure of the ISO 8000 series; — providing a summary of the content of each part in the ISO 8000 series; — establishing the relationship of the ISO 8000 series to other international standards.

  • Standard
    20 pages
    English language
    sale 15% off