ISO 1096:2021

INTERNATIONAL ISO
STANDARD 1096
Fourth edition
2021-05
Plywood — Classification
Contreplaqué — Classification
Reference number
ISO 1096:2021(E)
©
ISO 2021

---------------------- Page: 1 ----------------------
ISO 1096:2021(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 1096:2021(E)

Contents  Page
Foreword .iv
1  Scope . 1
2  Normative references . 1
3  Terms and definitions . 1
4  Classification . 1
4.1 General . 1
4.2 General description . 1
4.2.1 Panel type as specified in accordance with ISO 2074 . 1
4.2.2 Form and shape as specified in accordance with ISO 2074 . 2
4.2.3 Surface appearances as specified in accordance with ISO 2426-1,
ISO 2426-2, ISO 2426-3, and ISO 2426-4. 2
4.2.4 Surface finishes as specified in accordance with ISO 2074. 2
4.3 Principal characteristics . 2
4.3.1 Mechanical properties linked with the type of application . 2
4.3.2 Exposure conditions as specified in accordance with ISO 12465 . 2
4.3.3 Specific treatments to improve . 2
© ISO 2021 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 1096:2021(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different appr
...