ISO 7388-1:1983/Add 1:1984
(Main)Tool shanks with 7/24 taper for automatic tool changers - Part 1: Shanks Nos. 40, 45 and 50 - Dimensions - Addendum 1: Conicity tolerances
Tool shanks with 7/24 taper for automatic tool changers - Part 1: Shanks Nos. 40, 45 and 50 - Dimensions - Addendum 1: Conicity tolerances
Queues d'outils à conicité 7/24 pour changement automatique d'outils — Partie 1: Cônes nos 40, 45 et 50 — Dimensions — Additif 1: Tolérances de conicité
General Information
Relations
Frequently Asked Questions
ISO 7388-1:1983/Add 1:1984 is a standard published by the International Organization for Standardization (ISO). Its full title is "Tool shanks with 7/24 taper for automatic tool changers - Part 1: Shanks Nos. 40, 45 and 50 - Dimensions - Addendum 1: Conicity tolerances". This standard covers: Tool shanks with 7/24 taper for automatic tool changers - Part 1: Shanks Nos. 40, 45 and 50 - Dimensions - Addendum 1: Conicity tolerances
Tool shanks with 7/24 taper for automatic tool changers - Part 1: Shanks Nos. 40, 45 and 50 - Dimensions - Addendum 1: Conicity tolerances
ISO 7388-1:1983/Add 1:1984 is classified under the following ICS (International Classification for Standards) categories: 25.060.20 - Dividing and tool-workpiece holding devices. The ICS classification helps identify the subject area and facilitates finding related standards.
ISO 7388-1:1983/Add 1:1984 has the following relationships with other standards: It is inter standard links to ISO 7388-1:1983, ISO 7388-1:2007; is excused to ISO 7388-1:1983. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase ISO 7388-1:1983/Add 1:1984 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of ISO standards.
Standards Content (Sample)
INTERNATIONAL STANDARD IS0 7388/l-1983/ADDENDUM 1
Published 1984-12-15
INTERNATIONAL ORGANIZATION FOR STANDARDlZATiON.MEXAYHAPO,QHAR OPI-AHM3AUMR IlO CTAHAAPTM3AlJbl~~ORGANISATION INTERNATIONALE DE NORMALISATION
Tool shanks taper rate 7/24 for automatic tool changer -
Part 1 : Shanks Nos. 40, 45 and 50 - Dimensions
ADDENDUM 1 : Conicity tolerances
Queues d’outils B conicit 7124 pour changement automatique d’outils - Partie 7 : Gnes nOS40, 45 et 50 - Dimensions
ADD/T/F 7 : Tokrances de conicit
Addendum 1 to International Standard IS0 7388/l-1983 was developed by Technical Committee lSO/TC 39, Machine too/s.
1 Scope and field of application
This addendum lays down the quality of conicity tolerances of shanks Nos. 40, 45 and 50.
...
NORME INTERNATIONALE ISO 7388/1=1983/ADDITIF 1
Publié 1984-12-15
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION.MEX~YHAPO~HAR OPTAHM3AlJtlR l-t0 CTAHAAPTM3A~MM*ORGANISATlON INTERNATIONALE DE NORMALISATION
Queues d’outils à tonicité 7/24 pour changement
automatique d’outils -
Partie 1 : Cônes nos40, 45 et 50 - Dimensions
ADDITIF 1 : Tolérances de tonicité
Part 7 : Shanks Nos. 40, 45 and 50 - Dimensions
Tool shanks taper rate 7124 for automatic tool changer -
ADDENDUM 7 : Conicity tolerances
L’additif 1 à I’ISO 7388/1-1983 a été élaboré par le comité technique ISO/TC 39, Machines-O&i/s.
1 Objet et domaine d’application
Le présent additif fixe la qualité de tolérances de tonicité des cônes nos 40, 45 et 50.
...
NORME INTERNATIONALE ISO 7388/1=1983/ADDITIF 1
Publié 1984-12-15
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION.MEX~YHAPO~HAR OPTAHM3AlJtlR l-t0 CTAHAAPTM3A~MM*ORGANISATlON INTERNATIONALE DE NORMALISATION
Queues d’outils à tonicité 7/24 pour changement
automatique d’outils -
Partie 1 : Cônes nos40, 45 et 50 - Dimensions
ADDITIF 1 : Tolérances de tonicité
Part 7 : Shanks Nos. 40, 45 and 50 - Dimensions
Tool shanks taper rate 7124 for automatic tool changer -
ADDENDUM 7 : Conicity tolerances
L’additif 1 à I’ISO 7388/1-1983 a été élaboré par le comité technique ISO/TC 39, Machines-O&i/s.
1 Objet et domaine d’application
Le présent additif fixe la qualité de tolérances de tonicité des cônes nos 40, 45 et 50.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...