ISO 355:2007/Amd 1:2012
(Amendment)Rolling bearings - Tapered roller bearings - Boundary dimensions and series designations - Amendment 1
Rolling bearings - Tapered roller bearings - Boundary dimensions and series designations - Amendment 1
Roulements — Roulements à rouleaux coniques — Dimensions d'encombrement et désignation des séries — Amendement 1
General Information
Relations
Frequently Asked Questions
ISO 355:2007/Amd 1:2012 is a standard published by the International Organization for Standardization (ISO). Its full title is "Rolling bearings - Tapered roller bearings - Boundary dimensions and series designations - Amendment 1". This standard covers: Rolling bearings - Tapered roller bearings - Boundary dimensions and series designations - Amendment 1
Rolling bearings - Tapered roller bearings - Boundary dimensions and series designations - Amendment 1
ISO 355:2007/Amd 1:2012 is classified under the following ICS (International Classification for Standards) categories: 21.100.20 - Rolling bearings. The ICS classification helps identify the subject area and facilitates finding related standards.
ISO 355:2007/Amd 1:2012 has the following relationships with other standards: It is inter standard links to ISO 355:2007, ISO 355:2019. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase ISO 355:2007/Amd 1:2012 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of ISO standards.
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 355
Second edition
2007-07-15
AMENDMENT 1
2012-02-01
Rolling bearings — Tapered roller
bearings — Boundary dimensions and
series designations
AMENDMENT 1
Roulements — Roulements à rouleaux coniques — Dimensions
d’encombrement et désignation des séries
AMENDEMENT 1
Reference number
ISO 355:2007/Amd.1:2012(E)
©
ISO 2012
ISO 355:2007/Amd.1:2012(E)
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2012 – All rights reserved
ISO 355:2007/Amd.1:2012(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with
...
NORME ISO
INTERNATIONALE 355
Deuxième édition
2007-07-15
AMENDEMENT 1
2012-02-01
Roulements — Roulements à rouleaux
coniques — Dimensions d’encombrement
et désignation des séries
AMENDEMENT 1
Rolling bearings — Tapered roller bearings — Boundary dimensions
and series designations
AMENDMENT 1
Numéro de référence
ISO 355:2007/Amd.1:2012(F)
©
ISO 2012
ISO 355:2007/Amd.1:2012(F)
DOCUMENT PROTÉGÉ PAR COPYRIGHT
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publication ne peut être reproduite ni utilisée sous
quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l’accord écrit
de l’ISO à l’adresse ci-après ou du comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Publié en Suisse
ii © ISO 2012 – Tous droits réservés
ISO 355:2007/Amd.1:2012(F)
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale d’organismes nationaux de
normalisation (comités membres de l’ISO). L’élaboration des Normes internationales est en général confiée aux
comités techniques de l’ISO. Chaque comité membre intéressé par une étude a le droit de faire partie du comité
technique créé à cet effet. Les organisations internationales, gouvernementales et non gouvernementales,
en liaison avec l’ISO participent également aux travaux. L’ISO collabore étroitement avec la Commission
électrotechnique internationale (CEI) en ce qu
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...