Prostheses and orthoses — Factors to be included when describing physical activity of a person who has had a lower limb amputation(s) or who has a deficiency of a lower limb segment(s) present at birth

ISO 29781:2008 describes the factors to be included when describing the physical activity of a person who has had a lower limb amputation(s) or who has a deficiency of a lower limb segment(s) present at birth.

Prothèses et orthèses — Points à inclure lors de descriptif d'activité physique d'une personne ayant subi une amputation d'un membre inférieur ou qui a une malformation congénitale d'un segment de membre inférieur

General Information

Status
Published
Publication Date
16-Nov-2008
Current Stage
9060 - Close of review
Start Date
04-Jun-2029
Ref Project

Buy Standard

Standard
ISO 29781:2008 - Prostheses and orthoses -- Factors to be included when describing physical activity of a person who has had a lower limb amputation(s) or who has a deficiency of a lower limb segment(s) present at birth
English language
5 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 29781
First edition
2008-12-01

Prostheses and orthoses — Factors to be
included when describing physical
activity of a person who has had a lower
limb amputation(s) or who has a
deficiency of a lower limb segment(s)
present at birth
Prothèses et orthèses — Points à inclure lors de descriptif d'activité
physique d'une personne ayant subi une amputation d'un membre
inférieur ou qui a une malformation congénitale d'un segment de
membre inférieur




Reference number
ISO 29781:2008(E)
©
ISO 2008

---------------------- Page: 1 ----------------------
ISO 29781:2008(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


COPYRIGHT PROTECTED DOCUMENT


©  ISO 2008
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2008 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 29781:2008(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 29781 was prepared by Technical Committee ISO/TC 168, Prosthetics and orthotics.

© ISO 2008 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 29781:2008(E)
Introduction
The activity of a person with an absent or deficient lower limb segment may be described in many ways. The
various members of clinic teams in different countries develop their own nomenclature to record this
information. Hence there is a need for an international system to allow comparisons to be made. The system
described is designed to meet the needs of a clinic team in assessing a person and evaluating their treatment.
This International Standard indicates the minimum information concerning a person’s activity, which is to be
included in any description.

iv © ISO 2008 – All rights reserved

---------------------- Page: 4 ----------------------
INTERNATIONAL STANDARD ISO 29781:2008(E)

Prostheses and orthoses — Factors to be included when
describing physical activity of a person who has had a lower
limb amputation(s) or who has a deficiency of a lower limb
segment(s) present at birth
1 Scope
This International Standard describes the factors to be included when describing the physical activity of a
person who has had a lower limb amputation(s) or who has a deficiency of a lower limb segment(s) present at
birth.
2 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
2.1
assisted
with the help of another person
2.2
assistive device
pr
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.