ISO 1008:1992
(Main)Photography — Paper dimensions — Pictorial sheets
Photography — Paper dimensions — Pictorial sheets
Specifies the nominal sizes and aim dimensions, with their cutting tolerances, of papers in sheets. Includes a method for checking the squareness of the sheets and straightness of their edges.
Photographie — Dimension des papiers — Papiers en feuilles pour usage général
Fotografija - Dimenzije papirja - Slikovne pole
Ta mednarodni standard določa nazivne velikosti in ciljne dimenzije, skupaj s tolerancami za rezanje, črno-belega in barvnega fotografskega papirja v polah (za negativno-pozitivno ali obračalno procesiranje) za slikovno uporabo. Določa tudi metodo za preverjanje pravokotnosti pol in ravnosti robov ter vzpostavlja pravilo za označevanje embalaže. Izraz »slikovni« pomeni uporabo pri ljubiteljski, komercialni in portretni fotografiji in izključuje posebne uporabe, kot so dokumentarna reprodukcija, fotokompozicija ali grafična umetnost. V tem mednarodnem standardu so osnova metrične enote.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2011
Fotografija - Dimenzije papirja - Slikovne pole
Photography - Paper dimensions - Pictorial sheets
Photographie - Dimension des papiers - Papiers en feuilles pour usage général
Ta slovenski standard je istoveten z: ISO 1008:1992
ICS:
37.040.20 )RWRJUDIVNLSDSLUILOPLLQ Photographic paper, films
IRWRJUDIVNHSORãþH)LOPVNL and cartridges
]YLWNL
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
INTERNATIONAL
STANDARD
Second edition
1992-01-15
Photography - Paper dimensions - Pictorial
sheets
Photograpkie - Dimension des Papiers - Papiers en feuilles pour wage
g&-Gral
Reference number
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national Standards bodies (ISO member bodies). The work
of preparing International Standards is normally carried out through ISO
technical committees. Esch member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, govern-
mental and non-governmental, in liaison with ISO, also take part in the
work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an Inter-
national Standard requires approval by at least 75 % of the member
bodies casting a vote.
International Standard ISO 1008 was prepared by Technical Committee
ISO/TC 42, Photography.
This second edition cancels and replaces the first edition
(ISO 1008:1973), and ISO 1010:1973, which have been technically re-
vised and consolidated.
Annexes A and B of this International Standard are for information only.
0 ISO 1992
All rights reserved. No part of this publlcation may be reproduced or utilized in any form
or by any means, eiectronic or mechanicai, including photocopying and microfilm, without
Permission in writing from the pubiisher.
International Organization for Standardization
Case Postale 56 l CH-121 1 Geneve 20 l Switzerland
Prlnted In Switzerland
ii
Introduction
This International Standard is a revision and consolidation of
ISO 1008:1973, dealing with sizes of black-and-white Papers in sheets,
and ISO 1010:1973, dealing with sizes of colour Papers in sheets.
. . .
Ill
This page intentionally left blank
INTERNATIONAL STANDARD ISO 1008:1992(E)
Photography - Paper dimensions - Pictorial sheets
3 Conditions for measurement of
1 Scope
dimensions
This International Standard specifies the nominal
sizes and aim dimensions, with their cutting toler-
The dimensions and tolerantes specified in this
ances, of black-and-white and colour photographic
International Standard apply at the time of manu-
Papers in sheets (negative-positive or reversal
facture, measured under atmospheric conditions of
processes) for pictorial use.
(23 + 2) “C and (50 + 5) % relative humidity, as
spe%ied in ISO 554’)(see annex A).
lt also specifies a method for checking the
squareness of the sheets and straightness of their
edges, and establishes a rule for package marking.
4 Dimensions
The term “pictorial” means use in amateur, com-
mercial and Portrait photography, and excludes
4.1 Preferred sizes
specific uses such as documentary reproduction,
photocomposition or graphic arts.
Nominal and aim dimensions for preferred sizes
shall conform to the values given in table 1.
In this International Standard, metric units are
Prime.
Tabfe 1 - Preferred sizes of sheets
2 Normative references Nominal Aim
cm
mm
The following Standards contain provisions which,
through reference in this text, constitute provisions
8,9 x 12,7 89 x 127
of this International Standard. At the time of publi-
10,5 x 14,8 ') 105 x 148
cation, the editions indicated were valid. All stan-
12,7 x 17,8 127 x 178
dards are subject to revision, and Parties to
17,8 x 24 178 x 240
agreements based on this In
...








Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.