iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO 8065:2024

(Main)

Composites and reinforcements fibres — Mechanoluminescent visualization method of crack propagation for joint evaluation

Composites and reinforcements fibres — Mechanoluminescent visualization method of crack propagation for joint evaluation

This document applies to the measurement of crack tip position and crack propagation on the bonding surface of carbon fibre reinforced plastic (CFRPs) and metal assemblies bonded panels. This document does not apply to the visualization measurement of strain distribution or defects during load application to specimens. This document does not intend to: a) omit relevant field tests for CFRP related engineering; b) generally specify the dimensions of test specimen to represent CFRPs related bonded or fastened structures; c) superimpose test results for specific applications of the parameters that exceed the range of this document.

Composites et fibres de renforts — Méthode de visualisation mécanoluminescente de la propagation des fissures pour l'évaluation des assemblages

General Information

Status
Published
Publication Date
21-May-2024
ICS
83.120 - Reinforced plastics
Technical Committee
ISO/TC 61/SC 13 - Composites and reinforcement fibres
Drafting Committee
ISO/TC 61/SC 13 - Composites and reinforcement fibres
Current Stage
6060 - International Standard published
Start Date
22-May-2024
Due Date
06-Aug-2024
Completion Date
22-May-2024
Ref Project

Buy Standard

ISO 8065:2024 - Composites and reinforcements fibres — Mechanoluminescent visualization method of crack propagation for joint evaluation Released:22. 05. 2024ISO 8065:2024 - Composites and reinforcements fibres — Mechanoluminescent visualization method of crack propagation for joint evaluation Released:22. 05. 2024
PreviousNext
Standard
ISO 8065:2024 - Composites and reinforcements fibres — Mechanoluminescent visualization method of crack propagation for joint evaluation Released:22. 05. 2024
English language
26 pages
sale 15% off
Preview
sale 15% off
Preview
ISO/PRF 8065 - Composites and reinforcements fibres — Mechanoluminescent visualization method of crack propagation for joint evaluation Released:5. 04. 2024ISO/PRF 8065 - Composites and reinforcements fibres — Mechanoluminescent visualization method of crack propagation for joint evaluation Released:5. 04. 2024
PreviousNext
Draft
ISO/PRF 8065 - Composites and reinforcements fibres — Mechanoluminescent visualization method of crack propagation for joint evaluation Released:5. 04. 2024
English language
26 pages
sale 15% off
Preview
sale 15% off
Preview
REDLINE ISO/PRF 8065 - Composites and reinforcements fibres — Mechanoluminescent visualization method of crack propagation for joint evaluation Released:5. 04. 2024REDLINE ISO/PRF 8065 - Composites and reinforcements fibres — Mechanoluminescent visualization method of crack propagation for joint evaluation Released:5. 04. 2024
PreviousNext
Draft
REDLINE ISO/PRF 8065 - Composites and reinforcements fibres — Mechanoluminescent visualization method of crack propagation for joint evaluation Released:5. 04. 2024
English language
26 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

International
Standard
ISO 8065
First edition
Composites and reinforcements
2024-05
fibres — Mechanoluminescent
visualization method of crack
propagation for joint evaluation
Composites et fibres de renforts — Méthode de visualisation
mécanoluminescente de la propagation des fissures pour
l'évaluation des assemblages
Reference number
ISO 8065:2024(en) © ISO 2024

---------------------- Page: 1 ----------------------
ISO 8065:2024(en)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland

© ISO 2024 – All rights reserved
ii

---------------------- Page: 2 ----------------------
ISO 8065:2024(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2  Normative references . 1
3  Terms and definitions . 1
4  Principle . 1
5 Specimen preparation . . 2
5.1 Specimen .2
5.2 Surface pre-treatment .2
5.3 Preparation for mechanoluminescence paint .2
5.4 Method of applying mechanoluminescence paint .2
5.5 Post-treatment .2
5.6 Scale labelling on specimen .2
6  Test equipment and testing procedure . . 4
6.1 Measurement equipment for mechanoluminescence .4
6.2 Test conditions .4
6.3 Recording conditions of mechanoluminescence .5
7  Data analysis .
...

International
Standard
ISO 8065
First edition
Composites and reinforcements
fibres — Mechanoluminescent
visualization method of crack
propagation for joint evaluation
Composites et fibres de renforts — Méthode de visualisation
mécanoluminescente de la propagation des fissures pour
l'évaluation des assemblages
PROOF/ÉPREUVE
Reference number
ISO 8065:2024(en) © ISO 2024

---------------------- Page: 1 ----------------------
ISO 8065:2024(en)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
PROOF/ÉPREUVE
© ISO 2024 – All rights reserved
ii

---------------------- Page: 2 ----------------------
ISO 8065:2024(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2  Normative references . 1
3  Terms and definitions . 1
4  Principle . 1
5 Specimen preparation . . 2
5.1 Specimen .2
5.2 Surface pre-treatment .2
5.3 Preparation for mechanoluminescence paint .2
5.4 Method of applying mechanoluminescence paint .2
5.5 Post-treatment .2
5.6 Scale labelling on specimen .2
6  Test equipment and testing procedure . . 4
6.1 Measurement equipment for mechanoluminescence .4
6.2 Test conditions .4
6.3 Recording conditions of mechanoluminescence .5
7  Data analysis .
...

Style Definition
ISO/DISPRF 8065:2023(E) .
Formatted: Font: 14 pt, Bold, Font color: Auto
ISO /TC 61/SC 13/WG 7
Formatted: Right: 1.5 cm, Bottom: 1 cm, Gutter: 0 cm,
Section start: New page, Header distance from edge:
Date: 2023-02-11
1.27 cm, Footer distance from edge: 1.27 cm
Secretariat: JISC Formatted: Font: 14 pt, Bold, Font color: Auto
Formatted: zzCover large
Date: 2024-04-05
Formatted
...
Formatted: Cover Title_A1
Composites and reinforcements fibres — Mechanoluminescent
visualization method of crack propagation for joint evaluation
Composites et fibres de renforts — Méthode de visualisation mécanoluminescente de la propagation des fissures
pour l'évaluation des assemblages
PROOF

---------------------- Page: 1 ----------------------
ISO/DISPRF 8065:2023(E2024(en) Formatted: Font: 11 pt, Bold, Font color: Auto
Formatted: Font: Bold
Formatted: HeaderCentered
© ISO 20232024
Formatted: Font: 11 pt, Bold, Font color: Auto
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication Formatted: Font: 11 pt, Bold, Font color: Auto
may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying,
Formatted: Default Paragraph Font
or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO
Formatted: Adjust space between Latin and Asian text,
at the address below or ISO’s member body in the country of the requester.
Adjust space between Asian text and numbers
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
Formatted: French (Switzerland)
EmailE-mail: copyright@iso.org
Formatted: French (Switzerland)
Website: www.iso.orgwww.iso.org
Formatted: French (Switzerland)
Published in Switzerland
Formatted: FooterPageRomanNumber
ii © ISO 2023 – All rights reserved
© ISO 2024 – All rights reserved
ii

---------------------- Page: 2 ----------------------
ISO/DISPRF 8065:2023(E2024(en) Formatted: Font: 11 pt, Bold, Font color: Auto
Formatted: HeaderCentered, Left
Formatted: Font: 11 pt, Bold, Font color: Auto
Contents
Formatted: Font: 11 pt, Bold, Font color: Auto
Formatted: Font: Bold
Foreword . v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Specimen preparation . 2
5.1 Specimen . 2
5.2 Surface pre-treatment . 2
5.3 Preparation for mechanoluminescence paint . 3
5.4 Method of applying mechanoluminescence paint . 3
5.5 Post-treatment . 3
5.6 Scale labelling on specimen . 3
6 Test equipment and testing procedure . 5
6.1 Measurement equipment for mechanoluminescence . 5
6.2 Test conditions . 7
6.3 Recording conditions of mechanoluminescence .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO/TS 23927:2024(Main)
Laminates and moulding compounds — Prepregs — Determination of tack

This document specifies the test method for determining the tack in prepregs under defined conditions. This document is applicable to but not limited to unidirectional and multidirectional thermoset based prepregs made with glass fibres, carbon fibres, aramid fibres and other similar fibres included.

  • Technical specification
    10 pages
    English language
    sale 15% off
ISO
ISO 8605:2024(Main)
Fibre-reinforced plastics — Sheet moulding compound (SMC) — Requirements and specifications

This document establishes requirements and specifications for sheet moulding compound (SMC) used in the production of composite parts by hot moulding. It is suitable for sheet moulding compound with glass fibres (GF) and carbon fibres (CF) as the sole or main reinforcement. Other fibre (e.g. natural fibre) reinforced sheet moulding compounds can also be used with this document.

  • Standard
    12 pages
    English language
    sale 15% off
ISO
ISO 8060:2024(Main)
Composites and reinforcements fibres — Carbon fibre reinforced plastics (CFRPs) and metal assemblies — Characterization of durability of adhesive interfaces by wedge rupture test

This document specifies a method for determining the durability of the adhesive joints of carbon fibre reinforced plastics (CFRPs) and metal assemblies by a wedge rupture test using a double cantilever beam (DCB) specimen under specified environmental conditions. This method is intended for evaluating the safety and reliability of adhesives, primers, and surface treatments of the adherends.

  • Standard
    10 pages
    English language
    sale 15% off
ISO
ISO 8057:2024(Main)
Determination of galvanic corrosion rate for assembled forms of carbon fibre reinforced plastics (CFRPs) and protection-coated metal — Electrochemical tests in neutral sodium chloride solution

This document specifies the electrochemical test for determining galvanic corrosion rate of CFRPs and metal assemblies with protection-coating, subjected to the corrosive environment of electrolyte diffusion through the coating. It specifies the apparatus, the test solutions, and the procedure to be used in conducting the electrochemical tests for a) the assessment of the Fick's diffusion parameter for protective coating on metallic materials, and b) the estimation of the galvanic corrosion rates with the conversion of ISO 21746 coating-free sample data. The following are intended situations of implementing an electrochemical test based on this document: a) when interested parties estimate the galvanic corrosion rate of bonded joints relating engineering metals with protection-coating and CFRPs of the potential drastically nobler than those of most metals, utilizing the resources of ISO 17475; b) when expanding CFRP-metal bonded joints applications using coatings to the fields of corrosion-sensitive environments caused by electrolytes. It is not the intent of this document to fulfil the need for: — omitting relevant field tests for the applications in corrosive environment; — superimposing test data for specific applications for the range of relevant data; — comparative testing as a means of ranking different protections with respect to corrosion rates; — ignoring the field hazards such as erosion, abrasion, and ultraviolet irradiation.

  • Standard
    14 pages
    English language
    sale 15% off
ISO
ISO 22314:2023(Main)
Plastics — Glass-fibre-reinforced products — Determination of fibre length

This document specifies a method of determining the length of the fibres present in a fibre-reinforced product. The method is applicable to moulding materials and to moulded parts. The test conditions specified limit the application of this method to thermoplastics reinforced with short glass fibres (less than 1 mm long), i.e. fibres whose length is less than or equal to 7,5 mm prior to incorporation in the moulding material and moulding.

  • Standard
    4 pages
    English language
    sale 15% off
ISO
ISO 14126:2023(Main)
Fibre-reinforced plastic composites — Determination of compressive properties in the in-plane direction

This document specifies methods for determining the compressive properties, in directions parallel to the plane of lamination, of fibre-reinforced plastic composites, based on thermosetting or thermoplastic matrices. The compressive properties are of interest for specifications and quality-control purposes. The test specimens are machined from a flat test plate, or from suitable finished or semi-finished products. Two loading methods and two types of specimen are described. The loading methods are: — Method 1: provides shear loading of the specimen (gauge length unsupported) — Method 2: provides combined loading of the specimen (gauge length unsupported) NOTE For tabbed specimens loaded using method 2, load is transferred through a combination of end-loading and shear-loading through the tabs. The specimen designs are: — Type A specimen: rectangular cross-section, fixed thickness, end-tabbed (mainly for aerospace style preimpregnates (~ 0,125 mm ply thickness) — Type B specimen: rectangular cross-section, range of thicknesses, untabbed or end-tabbed, two specimen sizes are available (B1 and B2). The Type A specimen is used for unidirectionally or biaxially reinforced materials tested in the fibre direction, where the fibres are normally either aligned continuous or aligned long (>7,5 mm) discontinuous. The Type B1 and B2 specimens are used for multi-directional aligned; mat, fabric and other multi-directionally reinforced materials where the fibre structure is more complex and/or coarser. This document gives criteria for checking that the combination of test method and specimen design result in valid failures. It is noted that alternative test method/specimen combinations will not necessarily give the same result. The methods specify required dimensions for the specimen. Tests carried out on specimens of other dimensions, or on specimens that are prepared under different conditions, can produce results that are not comparable. Other factors, such as the speed of testing, the support fixture used and the conditioning of the specimens, can influence the results.

  • Standard
    31 pages
    English language
    sale 15% off
  • Standard
    31 pages
    French language
    sale 15% off
ISO
ISO 1172:2023(Main)
Textile-glass-reinforced plastics — Prepregs, moulding compounds and laminates — Determination of the textile-glass and mineral-filler content using calcination methods

This document specifies two calcination methods for the determination of the textile glass and mineral filler content of glass-reinforced plastics: — Method A: for the determination of the textile glass content when no mineral fillers are present. — Method B: for the determination of the textile-glass and mineral-filler content when both components are present. This document is applicable to the following types of material: — prepregs made from yarns, rovings, tapes or fabrics; — SMC, BMC and DMC moulding compounds; — textile-glass-reinforced thermoplastic moulding materials and granules; — filled or unfilled textile-glass laminates made with thermosetting or thermoplastic resins. The methods do not apply to the following types of reinforced plastic: — those containing reinforcements other than textile glass; — those containing materials which do not completely burn off at the test temperature (for example, those based on silicone resin); — those containing mineral fillers which degrade at temperatures below the minimum calcination temperature.

  • Standard
    9 pages
    English language
    sale 15% off
  • Standard
    10 pages
    French language
    sale 15% off
ISO
ISO 4410:2023(Main)
Test methods for the experimental characterization of in-plane permeability of fibrous reinforcements for liquid composite moulding

This document specifies test methods for the experimental characterization of in-plane permeability of fibrous reinforcements for liquid composite moulding. Requirements for test equipment, test methods and data analysis are detailed, to ensure optimal accuracy and reproducibility of the results.

  • Standard
    32 pages
    English language
    sale 15% off
ISO
ISO 527-4:2023(Main)
Plastics — Determination of tensile properties — Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites

This document specifies the test conditions for the determination of the tensile properties of isotropic and orthotropic fibre-reinforced plastic composites, based upon the general principles given in ISO 527-1. NOTE 1 Unidirectional reinforced materials are covered by ISO 527-5. The methods are used to investigate the tensile behaviour of the test specimens and for determining the tensile strength, tensile modulus, Poisson's ratios and other aspects of the tensile stress-strain relationship under the defined conditions. The test method is suitable for use with the following materials: — fibre-reinforced thermosetting and thermoplastic composites incorporating non-unidirectional reinforcements such as mats, woven fabrics, woven rovings, chopped strands, combinations of such reinforcements, hybrids, rovings, short or milled fibres or preimpregnated materials (prepregs); NOTE 2 Injection moulded specimens are covered by ISO 527-2. — combinations of the above with unidirectional reinforcements and multidirectional reinforced materials constructed from unidirectional layers, provided such laminates are symmetrical; NOTE 3 Materials with completely or mainly unidirectional reinforcements are covered by ISO 527-5. — finished products made from materials mentioned above. The reinforcement fibres covered include glass fibres, carbon fibres, aramid fibres and other similar fibres.

  • Standard
    28 pages
    English language
    sale 15% off
  • Standard
    28 pages
    French language
    sale 15% off
ISO
ISO 15024:2023(Main)
Fibre-reinforced plastic composites — Determination of mode I interlaminar fracture toughness, GIC, for unidirectionally reinforced materials

This document specifies a method for the determination of mode I interlaminar fracture toughness (critical energy release rate), GIC, of unidirectional fibre-reinforced plastic composites using a double cantilever beam (DCB) specimen.

  • Standard
    33 pages
    English language
    sale 15% off