ISO/TS 10303-5001:2010

TECHNICAL ISO/TS
SPECIFICATION 10303-5001
First edition
2010-11-15

Industrial automation systems and
integration — Product data
representation and exchange —
Part 5001:
Guidance on the usage of ISO 10303-214
for gear units
Systèmes d'automatisation industrielle et intégration — Représentation
et échange de données de produits —
Partie 5001: Directives relatives à l'utilisation de l'ISO 10303-214 pour
les transmissions à engrenages



Reference number
ISO/TS 10303-5001:2010(E)
©
ISO 2010

---------------------- Page: 1 ----------------------
ISO/TS 10303-5001:2010(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


COPYRIGHT PROTECTED DOCUMENT


©  ISO 2010
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2010 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/TS 10303-5001:2010(E)
Contents Page
Foreword .viii
Introduction.ix
1 Scope.1
2 Normative references.3
3 Terms, definitions and abbreviated terms.3
3.1 Terms defined in ISO 10303-1 .3
3.2 Abbreviated terms.3
4 Information requirements.4
4.1 Preliminary elements .4
4.2 Application objects.4
4.2.1 Application_context .4
4.2.2 Application_property.5
4.2.3 Assembly_definition .5
4.2.4 Assembly_relationship.5
4.2.5 Baseplate.6
4.2.6 Basic_material.6
4.2.7 Bearing .6
4.2.8 Bearing_bearing.7
4.2.9 Belt_or_chain.7
4.2.10 Bevel_or_hypoid_gear.7
4.2.11 Bevel_or_hypoid_gear_pair .7
4.2.12 Clutch_or_brake.7
4.2.13 Coordinate_definition.8
4.2.14 Coupling.8
4.2.15 Crossed_helical_gear .8
4.2.16 Crossed_helical_gear_pair.8
4.2.17 Cylindrical_gear.8
4.2.18 Cylindrical_gear_pair.9
4.2.19 Data_environment.9
4.2.20 Deformation_shift_bending.9
4.2.21 Direction_definition.9
4.2.22 Document_assignment.10
4.2.23 Dynamic.11
4.2.24 Efficiency_loss .11
4.2.25 Environment.11
4.2.26 External_geometric_model.11
4.2.27 Fit_of_key_assembly .11
4.2.28 Fitting_key.12
4.2.29 Functional_relationship.12
4.2.30 Gear.12
4.2.31 Gear_pair.12
4.2.32 Gear_unit.13
4.2.33 General_gear_pair.13
4.2.34 General_property.13
4.2.35 Geometric_model.14
4.2.36 Geometry_property.14
4.2.37 Hardness.15
4.2.38 Housing.15
4.2.39 Housing_baseplate.16
4.2.40 Housing_bearing .16
© ISO 2010 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO/TS 10303-5001:2010(E)
4.2.41 Housing_clutch_or_brake.16
4.2.42 Housing_coupling .16
4.2.43 Housing_sealing .17
4.2.44 Interference_fit_assembly.17
4.2.45 Life_time.17
4.2.46 Load_capacity.17
4.2.47 Lubricant.17
4.2.48 Lubricant_definition.18
4.2.49 Lubricant_part.18
4.2.50 Manufacturing.18
4.2.51 Material_definition .18
4.2.52 Material_part.19
4.2.53 Material_property.19
4.2.54 Material_property_association.19
4.2.55 Material_property_value_definition .19
4.2.56 Mesh.20
4.2.57 Numerical_value .20
4.2.58 Parameter_property.20
4.2.59 Part.21
4.2.60 Partial_document_assignment.21
4.2.61 Partial_part_shape_definition .22
4.2.62 Part_definition.24
4.2.63 Part_definition_relationship.24
4.2.64 Part_instance.25
4.2.65 Part_shape_definition.25
4.2.66 Part_version .26
4.2.67 Pinion_shaft.26
4.2.68 Placement_reference_relationship .26
4.2.69 Placement_relationship.27
4.2.70 Plain_bearing.27
4.2.71 Planetary_gear_train.27
4.2.72 Position_orientation_property .27
4.2.73 Position_orientation_property_value .28
4.2.74 Position_orientation_property_value_definition.28
4.2.75 Power_rotation_speed.29
4.2.76 Pressure_stress.29
4.2.77 Property.29
4.2.78 Property_value.30
4.2.79 Property_value_definition.30
4.2.80 Rolling_element_bearing.31
4.2.81 Safety.31
4.2.82 Sealing.31
.................................................................................................................................32
4.2.83 Service_property
4.2.84 Shaft.32
4.2.85 Shaft_bearing.32
4.2.86 Shaft_clutch_or_brake.32
4.2.87 Shaft_collar.32
4.2.88 Shaft_sealing.33
4.2.89 Shaft_shaft.33
4.2.90 Shaft_wheel.33
4.2.91 Shape_description_association.33
4.2.92 Single_part_definition.34
4.2.93 Sliding_wear.34
4.2.94 Specification_property.34
4.2.95 Stiffness_suspension.34
4.2.96 String_value.34
4.2.97 Surface_condition.35
4.2.98 Surface_condition_association.35
4.2.99 Surface_texture.35
4.2.100 Surface_texture_parameter .36
iv © ISO 2010 – All rights reserved

---------------------- Page: 4 ----------------------
ISO/TS 10303-5001:2010(E)
4.2.101 Temperature.37
4.2.102 Tool .37
4.2.103 Tool_part_relationship.37
4.2.104 Torque_force.38
4.2.105 Unit.38
4.2.106 User_defined_part.38
4.2.107 User_defined_ relationship .39
4.2.108 Value_association .39
4.2.109 Value_limit.39
4.2.110 Value_list.40
4.2.111 Value_range .40
4.2.112 Value_with_unit .41
4.2.113 Wheel .41
4.2.114 Wheel_bearing .41
4.2.115 Wheel_belt_or_chain.42
4.2.116 Wheel_wheel .42
4.2.117 Worm.42
4.2.118 Worm_gear_pair .42
4.2.119 Worm_wheel .42
4.3 Application assertions.43
4.3.1 Assembly_relationship to Assembly_definition .43
4.3.2 Assembly_relationship to Part_instance.43
4.3.3 Coordinate_definition to Value_with_unit .43
4.3.4 Direction_definition to Value_with_unit.43
4.3.5 Document_assignment to Assembly_ relationship.43
4.3.6 Document_assignment to Partial_part_shape_definition.43
4.3.7 Document_assignment to Part_definition .43
4.3.8 Document_assignment to Part_definition_relationship.43
4.3.9 Document_assignment to Part_shape_definition.44
4.3.10 Document_assignment to Tool_part_relationship .44
4.3.11 Geometry_property to Partial_Part_shape_definition.44
4.3.12 Geometry_property to Part_shape_definition.44
4.3.13 Hardness to Value_with_unit.44
4.3.14 Material_definition to Part_definition.44
4.3.15 Material_property_association to Material_definition.44
4.3.16 Material_property_association to Material_property_value_definition.44
4.3.17 Material_property_value_definition to Material_property.45
4.3.18 Material_property_value_definition to Data_environment.45
4.3.19 Part_definition to Application_context .45
4.3.20 Part_definition to Part_version .45
4.3.21 Part_definition_relationship to Part_definition .45
4.3.22 Part_instance to Part_definition .45
4.3.23 Partial_part_shape_definition to Part_shape_definition.45
4.3.24 Part_shape_definition to Part_definition .45
4.3.25 Part_shape_definition to Part_instance.46
4.3.26 Part_version to Part .46
4.3.27 Placement_reference_relationship to Position_orientation_property_value_definition.46
4.3.28 Placement_relationship to Position_orientation_property_value_definition .46
4.3.29 Placement_relationship to Property_value_definition .46
4.3.30 Position_orientation_property_value to Coordinate_definition.46
4.3.31 Position_orientation_ property_value to Direction_definition .46
4.3.32 Position_orientation _property_value_definition to Position_orientation_property .46
4.3.33 Position_orientation _property_value_definition to Position_orientation_property_value.46
4.3.34 Property to Unit .47
4.3.35 Property_value_definition to Property.47
4.3.36 Property_value_definition to Property_value.47
4.3.37 Shape_description_association to External_geometric_model.47
4.3.38 Shape_description_association to Geometric_model .47
4.3.39 Shape_description_association to Partial_part_shape_definition .47
4.3.40 Shape_description_association to Part_shape_definition .47
© ISO 2010 – All rights reserved v

---------------------- Page: 5 ----------------------
ISO/TS 10303-5001:2010(E)
4.3.41 Surface_condition_association to Part_shape_definition .47
4.3.42 Surface_condition_association to Partial_part_shape_definition .48
4.3.43 Surface_condition_association to Surface_condition .48
4.3.44 Surface_texture_parameter to Surface_texture .48
4.3.45 Surface_texture_parameter to Value_with_unit .48
4.3.46 Tool_part_relationship to Part_definition .48
4.3.47 Value_association to Assembly_relationship .48
4.3.48 Value_association to Partial_part_shape_definition .48
4.3.49 Value_association to Part_definition.49
4.3.50 Value_association to Part_definition_relationship .49
4.3.51 Value_association to Part_shape_definition .49
4.3.52 Value_association to Property_value_definition.49
4.3.53 Value_association to Tool_part_relationship.49
4.3.54 Value_list to Property_value.49
5 Mapping to ISO 10303-214 .4
...