ISO 13584-26:2000/Amd 1:2007

INTERNATIONAL ISO
STANDARD 13584-26
First edition
2000-02-01
AMENDMENT 1
2007-11-01


Industrial automation systems and
integration — Parts library —
Part 26:
Logical resource: Information supplier
identification
AMENDMENT 1
Systèmes d'automatisation industrielle et intégration — Bibliothèque
de composants —
Partie 26: Ressource logique: Identification des fournisseurs
d'information
AMENDEMENT 1





Reference number
ISO 13584-26:2000/Amd.1:2007(E)
©
ISO 2007

---------------------- Page: 1 ----------------------
ISO 13584-26:2000/Amd.1:2007(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


COPYRIGHT PROTECTED DOCUMENT


©  ISO 2007
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2007 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 13584-26:2000/Amd.1:2007(E)


Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
Amendment 1 to ISO 13584-26:2000 was prepared by Technical Committee ISO/TC 184, Industrial
automation systems and integration, Subcommittee SC 4, Industrial data.
© ISO 2007 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 13584-26:2000/Amd.1:2007(E)

Industrial automation systems and integration — Parts
library —
Part 26:
Logical resource: Information supplier identification

AMENDMENT 1

Page 1, Clause 2
Replace the whole clause with the following:
2. Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 10303-11, Industrial automation systems and integration ― Product data representation and exchange ―
Part 11: Description methods: The EXPRESS language reference manual
ISO 13584-1, Industrial automation systems and integration ― Parts library ― Part 1: Overview and
fundamental principles
ISO/IEC 6523-1, Information technology ― Structure for the identification of organizations and organization
parts ― Part 1: Identification of organization identification schemes
ISO/IEC 8824-1, Information technology ― Abstract Syntax Notation One (ASN.1) — Part 1: Specification of
basic notation
ISO/IEC 10646, Information technology ― Universal Multiple-Octet Coded Character Set (UCS)
ISO/IEC 11179-3, Information technology ― Metadata registries (MDR) ― Part 3: Registry metamodel and
basic attributes

Page 1, Clause 3
Replace the whole clause with the following:
3. Terms and definitions
3.1. Terms defined in ISO 13584-1
For the purposes of this document, the following terms defined in ISO 13584-1 apply:
⎯ part;
⎯ parts library.

© ISO 2007 – All rights reserved 1

---------------------- Page: 4 ----------------------
ISO 13584-26:2000/Amd.1:2007(E)
3.2. Terms defined in ISO/IEC 6523-1
For the purposes of this document, the following terms defined in ISO/IEC 6523-1 apply:
⎯ data element value;
⎯ identification scheme;
⎯ identifier;
⎯ information supplier;
⎯ International Code Designator(ICD);
⎯ organization;
⎯ organization identification scheme;
⎯ organization identifier(OI);
⎯ organization part;
⎯ organization part identifier(OPI);
⎯ OPI source indicator(OPIS).

3.3. Terms defined in ISO/IEC 11179-3
For the purposes of this document, the following terms defined in ISO/IEC 11179-3 apply:
⎯ data element.

3.4. Other definitions
For the purposes of this document, the following terms and definitions apply:
3.4.1
information supplier
organization or organization part (see 3.2) that supplies information about parts (see 3.1)
EXAMPLE A person, a company, a part of a company, or a government agency.
3.4.2
standard document
documented agreement containing technical specifications or other precise criteria to be used consistently as
rules, guidelines, or definitions of characteristics, to ensure that one or more materials, products, processes,
or services are fit for the purposes for which the materials, products, processes, or services are intended
3.4.3
Wirth Syntax Notation derivative
WSND
derivative of Wirth Syntax Notation defined in ISO 10303-11

2 © ISO 2007 – All rights reserved

---------------------- Page: 5 ----------------------
ISO 13584-26:2000/Amd.1:2007(E)
Page 4, 4.1, sentence between NOTE 3 and NOTE 4
Replace “Clause 7.1 of ISO 10303-11:1994” with “ISO 10303-11”.

Page 4, 4.1, NOTE 4
Replace “Clause 7.1 of ISO 10303-11:1994” with “ISO 10303-11”.

Page 4, 4.1, NOTE 5
Delete the entire note.

Page 4, 4.1, NOTE 6
Renumber the note as “NOTE 5” and replace “Clause 7.1 of ISO 10303-11:1994” with “ISO 10303-11”.

Page 4, 4.1, sentence immediately following the newly numbered NOTE 5 (formerly NOTE 6)
Delete the entire sentence.

Page 4, 4.1, NOTE 7
Renumber the note as “NOTE 6” and replace the whole sentence with the following:
“The maximum length values in Table 1 apply to the number of characters which may contain non-roman
characters, and are independent of the character encoding system.”

Page 4, Table 1
Insert the following note at the bottom of the table, immediately before the table footnotes:
“NOTE The length of a string is the value returned by the EXPRESS length function.”

Page 6, 4.3, EXAMPLE 2
Replace the entire example with the following:
“EXAMPLE 2 IEC 61360-2:2004 (the content of which is also informatively duplicated in ISO 13584-
42:1998/Cor 1:2003) requires that the supplier code should be 70 characters long or less.”

Page 6, 4.3, EXAMPLE 3
Delete the entire example.
© ISO 2007 – All rights reserved 3

---------------------- Page: 6 ----------------------
ISO 13584-26:2000/Amd.1:2007(E)

Page 6, 4.3, NOTE 4
Delete the entire note.

Page 6, Clause 5
Insert the following new subclause heading immediately under the Clause 5 heading and before the first
paragraph:
“5.1 Supplier code for a standard document”
Renumber the subsequent subclauses, 5.1, 5.2 and 5.3, as 5.2, 5.3 and 5.4, respectively.

Page 6, newly numbered 5.1, first sentence
Replace “particular library” with “particular dictionary or library”.
Page 7, newly numbered 5.1, sentence immediately following Table 4
Replace “as specified in 5.1 and 5.2” with “as specified in 5.2 and 5.3”.

Page 7, newly numbered 5.3 (formerly 5.2), NOTE 1, first sentence
Invert the full-stop and the quotation mark at the end of the first sentence.

Page 8, newly numbered 5.4 (formerly 5.3)
Replace the entire subclause, including the notes, with the following:
“The first edition of document “International Classification for Standards” (ICS), published by ISO in 1992,
shall be identified by the supplier code “112/1///_00_1”. The sixth edition, published in 2005, shall be
identified by the supplier code “112/1///_00_6”.”

Page 8
Insert the following new subclause and clause immediately after the newly numbered 5.4 (formerly 5.3)
and before Annex A:
5.5. Identification of the national or regional standards
National or regional standard bodies may use the standard document register mechanism to identify national
or regional standards and data dictionaries. Apart from the organization identifiers already allocated to ISO,
IEC, and ISO/IEC with OI = 1, 2, 3 respectively, some national standardization bodies have been assigned an
OI for identifying translated data dictionaries. For the use of organization part identifier, i.e. OPI, it depends on
each national or regional standard body. However when it issues an OPI, it is required to guarantee the
uniqueness of the identifiers and the list of the identifiers must be kept publicly available. In this case, the
OPIS shall be marked as zero (0) if the OPI is assigned by the issuing organization of the ICD, namely ISO, or
one (1) if the OPI is assigned by an organization specified by an OI. An excerpt of the list of OIs under ICD =
0112 is included in Annex D of this part of ISO 13584.

4 © ISO 2007 – All rights reserved

---------------------- Page: 7 ----------------------
ISO 13584-26:2000/Amd.1:2007(E)
6. Escape mechanism from ISO 6523 based identification
ISO 6523 does not use IC
...