ISO 16000-11:2024

Norme
internationale
ISO 16000-11
Deuxième édition
Air intérieur —
2024-03
Partie 11:
Dosage de l'émission de composés
organiques volatils d'échantillons
de produits de construction
et d'objets d'équipement ―
Échantillonnage, conservation des
échantillons et préparation des
éprouvettes d'essais
Indoor air —
Part 11: Determination of the emission of volatile organic
compounds from samples of building products and furnishing —
Sampling, storage of samples and preparation of test specimens
Numéro de référence
ISO 16000-11:2024(fr) © ISO 2024

---------------------- Page: 1 ----------------------
ISO 16000-11:2024(fr)
DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2024
Tous droits réservés. Sauf prescription différente ou nécessité dans le contexte de sa mise en œuvre, aucune partie de cette
publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique,
y compris la photocopie, ou la diffusion sur l’internet ou sur un intranet, sans autorisation écrite préalable. Une autorisation peut
être demandée à l’ISO à l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Genève
Tél.: +41 22 749 01 11
E-mail: copyright@iso.org
Web: www.iso.org
Publié en Suisse

© ISO 2024 – Tous droits réservés
ii

---------------------- Page: 2 ----------------------
ISO 16000-11:2024(fr)
Sommaire Page
Avant-propos .iv
Introduction .v
1 Domaine d’application . 1
2 Références normatives . 1
3 Termes et définitions . 1
4 Échantillonnage du produit, transport et stockage de l’échantillon . 2
4.1 Échantillonnage du produit à soumettre à essai .2
4.2 Conditionnement et transport des échantillons .2
4.3 Description de l’échantillon .3
4.4 Stockage de l’échantillon avant le début de l’essai .3
5 Préparation des éprouvettes d’essai . 3
Annexe A (informative) Produits solides — Mode opératoire d’échantillonnage et de
préparation des éprouvettes d’essai . 4
Annexe B (informative) Produits liquides — Mode opératoire d’échantillonnage et de
préparation des éprouvettes d’essai . 7
Annexe C (informative) Produits combinés .12
Annexe D (informative) Émission des bords de coupe . 14
Bibliographie .15

© ISO 2024 – Tous droits réservés
iii

---------------------- Page: 3 ----------------------
ISO 16000-11:2024(fr)
Avant-propos
L’ISO (Organisa
...

FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 16000-11
ISO/TC 146/SC 6
Indoor air —
Secretariat: DIN
Voting begins on:
Part 11:
2023-12-20
Determination of the emission of
Voting terminates on:
volatile organic compounds from
2024-02-14
samples of building products and
furnishing — Sampling, storage of
samples and preparation of test
specimens
ISO/CEN PARALLEL PROCESSING
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 16000-11:2023(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS. © ISO 2023

---------------------- Page: 1 ----------------------
ISO/FDIS 16000-11:2023(E)
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 16000-11
ISO/TC 146/SC 6
Indoor air —
Secretariat: DIN
Voting begins on:
Part 11:
Determination of the emission of
Voting terminates on:
volatile organic compounds from
samples of building products and
furnishing — Sampling, storage of
samples and preparation of test
specimens
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
ISO/CEN PARALLEL PROCESSING
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
RECIPIENTS OF THIS DRAFT ARE INVITED TO
ISO copyright office
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
CP 401 • Ch. de Blandonnet 8
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
CH-1214 Vernier, Geneva
DOCUMENTATION.
Phone: +41 22 749 01 11
IN ADDITION TO THEIR EVALUATION AS
Reference number
Email: copyright@iso.org
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 16000-11:2023(E)
Website: www.iso.org
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
Published in Switzerland
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
ii
  © ISO 2023 – All rights reserved
NATIONAL REGULATIONS. © ISO 2023

---------------------- Page: 2 ----------------------
ISO/FDIS 16000-11:2023(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Sampling the product and transport and storage of sample . 2
4.1 Sampling of the product to be tested . 2
4.2 Sample packaging and transport . 2
4.3 Sample description . 2
4.4 Storage of the sample prior to starting the testing . 2
5 Preparation of test specimens . 3
Annex A (informative) Solid products — Procedure for sampling and test specimen
preparation .
...

ISO/FDIS 16000-11:2023(E)
ISO/TC 146/SC 6
Secretariat: DIN
Date: 2023-12-06
Indoor air —
Part 11:
Determination of the emission of volatile organic compounds
from samples of building products and furnishing — Sampling,
storage of samples and preparation of test specimens
Second edition
Date: 2023-09-29

---------------------- Page: 1 ----------------------
FDIS stage

---------------------- Page: 2 ----------------------
ISO/FDIS 16000-11:2023(E)
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this
publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical,
including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can
be requested from either ISO at the address below or ISO'sISO’s member body in the country of the requester.
ISO Copyright Office copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
Email: E-mail: copyright@iso.org
Website: www.iso.org
Published in Switzerland.
© ISO 2023 – All rights reserved iii
© ISO 2023 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO/FDIS 16000-11:2023(E)
Contents
Foreword . v
Introduction .vi i
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Sampling the product and transport and storage of sample. 2
4.1 Sampling of the product to be tested . 2
4.2 Sample packaging and transport . 3
4.3 Sample description . 3
4.4 Storage of the sample prior to starting the testing . 3
5 Preparation of test specimens . 3
Annex A (informative) Solid products — Procedure for sampling and test specimen preparation . 4
Annex B (informative) Liquid products — Procedure for sampling and test specimen preparation . 8
Annex C (informative) Combined products . 13
Annex D (informative) Cut edges emission . 15
Bibliography . 17

Foreword v
Introduction vi
1 Scope 1
2 Normative references 1
3 Terms and definitions 1
4 Symbols and abbreviated terms 2
5 Sampling the product and transport and storage of sample 2
5.1 Sampling of the product to be tested 2
5.2 Sample packaging and transport 2
5.3 Sample description 3
5.4 Storage of the sample prior to starting the testing 3
6 Preparation of test specimens 3
Annex A (normative) Solid products — Procedure for sampling and test specimen preparation 4
Annex B (normative) Liquid products — Procedure for sampling and test specimen preparation 8
Annex C (informative) Combined products 13
Annex D (informative) Cut edges emission and underfloor heating (Ondol) test 15
Bibliography 17
iv
iv © ISO 2023 – All rights reserved
 © ISO 2023 – All rights reserved

---------------------- Page: 4 ----------------------
ISO/FDIS 16000-11:2023(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO mem
...