ISO 12772:1997
(Main)Laboratory glassware — Disposable microhaematocrit capillary tubes
Laboratory glassware — Disposable microhaematocrit capillary tubes
Verrerie de laboratoire — Tubes capillaires microhématocrites à usage unique
Laboratorijska steklovina - Mikrohematokritne kapilarne cevke za enkratno uporabo
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Laboratorijska steklovina - Mikrohematokritne kapilarne cevke za enkratno uporaboVerrerie de laboratoire -- Tubes capillaires microhématocrites à usage uniqueLaboratory glassware -- Disposable microhaematocrit capillary tubes71.040.20Laboratorijska posoda in aparatiLaboratory ware and related apparatusICS:Ta slovenski standard je istoveten z:ISO 12772:1997SIST ISO 12772:1998en01-april-1998SIST ISO 12772:1998SLOVENSKI
STANDARD
SIST ISO 12772:1998
INTERNATIONAL STANDARD 12772 First edition 1997-05-o 1 Laboratory glassware - Disposable microhaematocrit capillary tubes Verrerie de labora toire - Tubes capillaires microh6matocrites & usage unique Reference number IS0 12772: 1997(E) SIST ISO 12772:1998
IS0 12772: 1997(E) Foreword IS0 (the International Organization for Standardization) is a worldwide federation of national standards bodies (IS0 member bodies). The work of preparing International Standards is normally carried out through IS0 technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. IS0 collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. This International Standard IS0 12772 has been prepared by Technical Committee lSO/TC 48, Laboratory glassware and related apparatus, Subcommittee SC 1, Volumetric instruments. Annexes A, B and C form an integral part of this International Standard. Annexes D and E are for information only. 0 IS0 1997 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Organization for Standardization Case postale 56 l CH-1211 Geneve 20 l Switzerland Internet central @ iso.ch x.400 c=ch; a=400net; p=iso; o=isocs; s=central Printed in Switzerland SIST ISO 12772:1998
INTERNATIONAL STANDARD @ IS0 IS0 12772: 1997(E) Laboratory glassware - Disposable microhaematocrit capillary tubes 1 Scope This International Standard provides details for two types of disposable glass capillary tubes, suitable for the microhaematocrit test and other analytical tests which include a separation of plasma and cells. The details specified are in conformity with IS0 8417, to the greatest possible extent. WARNING - Capillary tubes can break during the analytical test procedure, resulting in broken sharp glass, blood spillage and aerosols. Appropriate precautions shall be taken to avoid dangerous infections. 2 Normative references The following standards contain provisions which, through references in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and IS0 maintain registers of currently valid International Standards. IS0 719:1985, Glass - Hydrolytic resistance of glass grains at 98 OC - Method of test and classification. IS0 8417:---l, Laboratory volumetric instruments - Principles of design and construction of disposable volumetric articles. 3 Definition For the purposes of this International Standard, the following definition applies. 3.1 disposable: Adjective used to describe microhaematocrit capillary tubes which are intended to be used once only and then discarded. NOTE - Such capillary tubes will only be expected to provide their specified performance during the original operation. 4 Classification This International Standard describes two types of disposable glass capillary tubes as follows: - Type I: coated with anti-coagulant - Type II: uncoated NOTE - Ammonium heparin, lithium heparin and sodium heparin are the preferred anti-coagulants for the microhaematocrit test. Salts of EDTA 21 and fluorides (usually sodium or potassium) may be used when capillary tubes are needed for special purposes. ‘) To be published. 2, EDTA is a n abbreviation for ethylenediaminotetraacetic acid SIST ISO 12772:1998
IS0 12772:1997(E) @ IS0 5 Construction 5.1 Material When tested in accordance with the procedure and classification given in IS0 719, the glass used for the capillary tubes shall at least comply with the requirements of class HGB 3. The glass shall be free f
...
INTERNATIONAL
STANDARD
12772
First edition
1997-05-o 1
Laboratory glassware - Disposable
microhaematocrit capillary tubes
Verrerie de labora toire - Tubes capillaires microh6matocrites & usage
unique
Reference number
IS0 12772: 1997(E)
---------------------- Page: 1 ----------------------
IS0 12772: 1997(E)
Foreword
IS0 (the International Organization for Standardization) is a worldwide federation of national standards bodies
(IS0 member bodies). The work of preparing International Standards is normally carried out through IS0
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. IS0 collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for
voting. Publication as an International Standard requires approval by at least 75 % of the member bodies
casting a vote.
This International Standard IS0 12772 has been prepared by Technical Committee lSO/TC 48, Laboratory
glassware and related apparatus, Subcommittee SC 1, Volumetric instruments.
Annexes A, B and C form an integral part of this International Standard. Annexes D and E are for information
only.
0 IS0 1997
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case postale 56 l CH-1211 Geneve 20 l Switzerland
Internet central @ iso.ch
x.400 c=ch; a=400net; p=iso; o=isocs; s=central
Printed in Switzerland
---------------------- Page: 2 ----------------------
INTERNATIONAL STANDARD @ IS0 IS0 12772: 1997(E)
Laboratory glassware - Disposable microhaematocrit
capillary tubes
1 Scope
This International Standard provides details for two types of disposable glass capillary tubes, suitable for the
microhaematocrit test and other analytical tests which include a separation of plasma and cells. The details
specified are in conformity with IS0 8417, to the greatest possible extent.
WARNING - Capillary tubes can break during the analytical test procedure, resulting in broken sharp glass,
blood spillage and aerosols. Appropriate precautions shall be taken to avoid dangerous infections.
2 Normative references
The following standards contain provisions which, through references in this text, constitute provisions of this
International Standard. At the time of publication, the editions indicated were valid. All standards are subject
to revision, and parties to agreements based on this International Standard are encouraged to investigate the
possibility of applying the most recent editions of the standards indicated below. Members of IEC and IS0
maintain registers of currently valid International Standards.
IS0 719:1985, Glass - Hydrolytic resistance of glass grains at 98 OC - Method of test and classification.
IS0 8417:---l, Laboratory volumetric instruments - Principles of design and construction of disposable
volumetric articles.
3 Definition
For the purposes of this International Standard, the following definition applies.
3.1 disposable: Adjective used to describe microhaematocrit capillary tubes which are intended to be used
once only and then discarded.
NOTE - Such capillary tubes will only be expected to provide their specified performance during the original operation.
4 Classification
This International Standard describes two types of disposable glass capillary tubes as follows:
- Type I: coated with anti-coagulant
- Type II: uncoated
lithium heparin and sodium heparin are the preferred anti-coagulants for the
NOTE - Ammonium heparin,
21
microhaematocrit test. Salts of EDTA and fluorides (usually sodium or potassium) may be used when capillary tubes are
needed for special purposes.
‘) To be published.
2, EDTA is a n abbreviation for ethylenediaminotetraacetic acid
---------------------- Page: 3 ----------------------
@ IS0
IS0 12772:1997(E)
5
Construction
5.1 Material
When tested in accordance with the procedure and classification given in IS0 719, the glass used for the
capillary tubes shall at least comply with the requirements of class HGB 3.
The glass shall be free from visible defects and shall be free from internal stresses which would impair the
performance of the capillary tube.
5.2 Design
The tubes shall be straight and open at both ends without lip or constriction. The tubes may be slightly fire-
polished on one or both ends.
5.3 Dimensions
The dimensions of the tubes shall be as follows:
Length: (752 0,5) mm
Internal diameter: (
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.