ISO/IEC 29500-1:2008/Amd 1:2010

INTERNATIONAL ISO/IEC
STANDARD 29500-1
First edition
2008-11-15
AMENDMENT 1
2010-08-15
Information technology — Document
description and processing languages —
Office Open XML File Formats —
Part 1:
Fundamentals and Markup Language
Reference
AMENDMENT 1
Technologies de l'information — Description des documents et
langages de traitement — Formats de fichier “Office Open XML” —
Partie 1: Principes essentiels et référence de langage de balisage
AMENDEMENT 1
Reference number
ISO/IEC 29500-1:2008/Amd.1:2010(E)
©
ISO/IEC 2010
ISO/IEC 29500-1:2008/Amd.1:2010(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO/IEC 2010
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO/IEC 2010 – All rights reserved

ISO/IEC 29500-1:2008/Amd.1:2010(E)
Contents
Foreword . xviii
Notational conventions . xix
1. §2.6.1, “Base Application Description”, p. 5 . 1
2. §2.6.2, “Full Application Description, p. 5 . 1
3. §11.2, “Package Structure”, p. 30 . 1
4. §11.3.1, “Alternative Format Import Part”, p. 32 . 1
5. §11.3.2, “Comments Part”, p. 34 . 1
6. §11.3.3, “Document Settings Part”, p. 36 . 2
7. §11.3.4, “Endnotes Part”, p. 37 . 2
8. §11.3.5, “Font Table Part”, p. 40 . 2
9. §11.3.6, “Footer Part”, p. 41 . 2
10. §11.3.7, “Footnotes Part”, p. 43 . 2
11. §11.3.8, “Glossary Document Part”, p. 46 . 2
12. §11.3.9, “Header Part”, p. 48 . 3
13. §11.3.10, “Main Document Part”, p. 51. 3
14. §11.3.11, “Numbering Definitions Part”, p. 52 . 3
15. §11.3.12, “Style Definitions Part”, p. 55 . 3
16. §11.3.13, “Web Settings Part”, p. 57 . 3
17. §11.4, “Document Template”, p. 58 . 3
18. §11.5, “Framesets”, p. 58 . 3
19. §11.6, “Master Documents and Subdocuments”, p. 59 . 4
20. §11.7, “Mail Merge Data Source”, p. 61 . 4
21. §11.8, “Mail Merge Header Data Source”, p. 61 . 4
22. §11.9, “XSL Transformation”, p. 62 . 4
23. §12.2, “Package Structure”, pp. 65–66 . 4
24. §12.3, “Part Summary”, pp. 67–68 . 4
25. §12.3.1, “Calculation Chain Part”, p. 68. 5
26. §12.3.2, “Chartsheet Part”, p. 69 . 5
27. §12.3.3, “Comments Part”, p. 70 . 5
28. §12.3.4, “Connections Part”, p. 71 . 5
29. §12.3.5, “Custom Property Part”, p. 73 . 5
© ISO/IEC 2010 – All rights reserved  iii

ISO/IEC 29500-1:2008/Amd.1:2010(E)

30. §12.3.6, “Custom XML Mappings Part”, p. 74 . 6
31. §12.3.6, “Custom XML Mappings Part”, p. 74 . 6
32. §12.3.7, “Dialogsheet Part”, p. 75 . 6
33. §12.3.8, “Drawings Part”, p. 77 . 6
34. §12.3.9, “External Workbook References Part”, p. 78 . 6
35. §12.3.10, “Metadata part”, pp. 80–81 . 6
36. §12.3.11, “Pivot Table Part”, p. 83 . 6
37. §12.3.12, “Pivot Table Cache Definition Part”, p. 84. 7
38. §12.3.13, “Pivot Table Cache Records Part”, p. 86 . 7
39. §12.3.14, “Query Table Part”, p. 87 . 7
40. §12.3.15, “Shared Strings Table Part”, p. 88 . 7
41. §12.3.16, “Shared Workbook Revision Headers Part”, p. 89 . 7
42. §12.3.17, “Shared Workbook Revision Log Part”, p. 90 . 7
43. §12.3.18, “Shared Workbook User Data Part”, pp. 91–92 . 8
44. §12.3.19, “Single Cell Table Definition Part”, p. 92–93 . 8
45. §12.3.20, “Styles Part”, p. 94 . 8
46. §12.3.21, “Table Definition Part”, p. 95 . 8
47. §12.3.22, “Volatile Dependencies Part”, p. 96 . 8
48. §12.3.23, “Workbook Part”, p. 97 . 9
49. §12.3.24, “Worksheet Part”, p. 99 . 9
50. §12.4, “External Workbooks”, p. 101 . 9
51. §13.2, “Package Structure”, p. 104 . 9
52. §13.3.1, “Comment Authors Part”, p. 107 . 9
53. §13.3.2, “Comments Part”, p. 108 . 9
54. §13.3.3, “Handout Master Part”, p. 109 . 10
55. §13.3.4, “Notes Master Part”, p. 111. 10
56. §13.3.5, “Notes Slide Part”, p. 112 . 10
57. §13.3.6, “Presentation Part”, pp. 113–114 . 10
58. §13.3.7, “Presentation Properties Part”, p. 115 . 10
59. §13.3.8, “Slide Part”, p. 116 . 10
60. §13.3.9, “Slide Layout Part”, p. 118 . 11
61. §13.3.10, “Slide Master Part”, p. 120 . 11
iv  © ISO/IEC 2010 – All rights reserved

ISO/IEC 29500-1:2008/Amd.1:2010(E)
62. §13.3.11, “Slide Synchronization Data Part”, p. 121 . 11
63. §13.3.12, “User Defined Tags Part”, p. 122 . 11
64. §13.3.31, “View Properties Part”, p. 123 . 11
65. §13.4, “HTML Publish Location”, p. 124 . 11
66. §13.5, “Slide Synchronization Server Location”, p. 125 . 11
67. §14.2.1, “Chart Part”, p. 128 . 12
68. §14.2.2, “Chart Drawing Part”, p. 130 . 12
69. §14.2.3, “Diagram Colors Part”, p. 131 . 12
70. §14.2.4, “Diagram Data Part”, p. 132 . 12
71. §14.2.5, “Diagram Layout Definition Part”, pp. 133–134 . 12
72. §14.2.6, “Diagram Style Part”, p. 135 . 12
73. §14.2.7, “Theme Part”, p. 136 . 13
74. §14.2.8, “Theme Override Part”, p. 138 . 13
75. §14.2.9, “Table Styles Part”, p. 139 . 13
76. §15.2.2, “Audio Part”, p. 144 . 13
77. §15.2.3, “Bibliography Part”, pp. 144–145 . 13
78. §15.2.4, “Content Part”, p. 146 . 13
79. §15.2.5, “Custom XML Data Storage Part”, p. 147 . 13
80. §15.2.6, “Custom XML Data Storage Properties Part”, p. 147 . 14
81. §15.2.9, “Embedded Control Persistence Part”, p. 150 . 14
82. §15.2.9, “Embedded Control Persistence Part”, p. 151 . 14
83. §15.2.10, “Embedded Object Part”, p. 152 . 14
84. §15.2.11, “Embedded Package Part”, p. 154 . 14
85. §15.2.12.2, “Custom File Properties Part”, p. 156. 14
86. §15.2.12.3, “Extended File Properties Part”, p. 158 . 14
87. §15.2.13, “Font Part”, p. 160 . 15
88. §15.2.14, “Image Part”, p. 160 . 15
89. §15.2.15, “Printer Settings Part”, p. 161 . 15
90. §15.2.16, “Thumbnail Part”, p. 163 . 15
91. §15.2.17, “Video Part”, p. 164 . 15
92. §15.3, “Hyperlinks Part”, p. 164 . 15
93. §16.2, “SpreadsheetML Summary”, p. 167 . 15
© ISO/IEC 2010 – All rights reserved  v

ISO/IEC 29500-1:2008/Amd.1:2010(E)

94. §17.3.2.43, “w (Expanded/Compressed Text)”, pp. 342–343 . 16
95. §17.3.3.2, “contentPart (ContentPart)”, p. 346 . 16
96. §17.3.3.2, “contentPart (ContentPart)”, p. 348 . 16
97. §17.3.3.2, “contentPart (ContentPart)”, p. 348, attribute id. 17
98. §17.3.3.3, “control (Embedded Control)”, p. 349, attribute id . 17
99. §17.3.3.17, “movie (Embedded Video)”, p. 361 . 18
100. §17.3.3.17, “movie (Embedded Video)”, p. 362, attribute id . 18
101. §17.3.3.20, “objectEmbed (Embedded Object Properties)”, p. 366, attribute id . 19
102. §17.3.3.21, “objectLink (Linked Object Properties)”, p. 368, attribute id . 19
103. §17.4.88, “Table Measurement (CT_TblWidth)”, p. 527, attribute w . 19
104. §17.6.2, “bottom (Bottom Border)”, pp. 612–614, attribute various . 20
105. §17.6.7, “left (LeftBorder)”, p. 630, attribute id . 21
106. §17.6.14, “printerSettings (Reference to Printer Settings Data)”, p. 650, attribute id . 21
107. §17.6.15, “right (Right Border)”, p. 653, attribute id . 22
108. §17.6.21, “top (Top Border)”, pp. 670–676, attribute various . 22
109. §17.8.3.3, “embedBold (Bold Style Font Style Embedding)”, p. 754, attribute id. 23
110. §17.8.3.4, “embedBoldItalic (Bold Italic Font Style Embedding)”, p. 756, attribute id . 24
111. §17.8.3.5, “embedItalic (Italic Font Style Embedding)”, pp. 758–759, attribute id . 25
112. §17.8.3.6, “embedRegular (Regular Font Style Embedding)”, pp. 760–761, attribute id . 26
113. §17.10.2, “footerReference (Footer Reference)”, pp. 823–824 . 26
114. §17.10.2, “footerReference (Footer Reference)”, p. 825, attribute id . 27
115. §17.10.5, “headerReference (Header Reference)”, pp. 832–834 . 27
116. §17.10.5, “headerReference (Header Reference)”, p. 834, attribute id . 28
117. §17.14.9, “dataSource (Data Source File Path)”, pp. 1057–1058, attribute id . 29
118. §17.14.9, “dataSource (Data Source File Path)”, p. 1058, attribute id . 29
119. §17.14.16, “headerSource (Header Definition File Path)”, p. 1064 . 30
120. §17.14.16, “headerSource (Header Definition File Path)”, p. 1065, attribute id . 30
121. §17.14.28, “recipientData (Reference to Inclusion/Exclusion Data for Data Source)”, pp. 1079–1080 . 30
122. §17.14.28, “recipientData (Reference to Inclusion/Exclusion Data for Data Source)”, p. 1080–1081, attribute id . 31
123. §17.14.30, “src (ODSO Data Source File Path)”, p. 1083 . 32
124. §17.14.30, “src (ODSO Data Source File Path)”, p. 1083, attribute id . 32
125. §17.14.35, “uniqueTag (Unique Value for Record)”, pp. 1088–1089 . 32
vi  © ISO/IEC 2010 – All rights reserved

ISO/IEC 29500-1:2008/Amd.1:2010(E)
126. §17.15.1.6, “attachedTemplate (Attached Document Template)”, pp. 1097–1098, attribute id . 33
127. §17.15.1.76, “saveThroughXslt (Custom XSL Transform To Use When Saving As XML File)”, p. 1193, attribute id . 33
128. §17.15.2.23, longDesc (Frame Long Description)”, p. 1253 . 34
129. §17.15.2.23, “longDesc (Frame Long Description)”, p. 1253, attribute id . 34
130. §17.15.2.39, “sourceFileName (Source File for Frame)”, p. 1276 . 34
131. §17.15.2.39, “sourceFileName (Source File for Frame)”, pp. 1277–1278, attribute id. 35
132. §17.16.22, “hyperlink (Hyperlink)”, p. 1426, attribute id . 35
133. §17.17.1.1, “subDoc (Anchor for Subdocument Location)”, pp. 1444–1445 . 35
134. §17.17.1.1, “subDoc (Anchor for Subdocument Location)”, p. 1446, attribute id . 36
135. §17.17.2.1, “altChunk (Anchor for Imported External Content)”, pp. 1447–1448 . 37
136. §17.17.2.1, “altChunk (Anchor for Imported External Content)”, p. 1449, attribute id . 37
137. §17.18, “Simple Types”, p. 1453 . 37
138. §17.18.95, “ST_TextScale (Text Expansion/Compression Percentage)”, p. 1668 . 37
139. §17.18.106, “ST_TextScalePercent (Text Expansion/Compression Percentage), new subclause . 38
140. §17.18.107, “ST_MeasurementOrPercent (Measurement or Percentage Value)”, new subclause . 39
141. §18.2.7, “ext (Extension)”, p. 1721 . 39
142. §18.2.8, “externalReference (External Reference)”, p. 1722, attribute id . 40
143. §18.2.17, “pivotCache (PivotCache)”, p. 1731, attribute id. 40
144. §18.2.19, “sheet (Sheet Information)”, p. 1732, attribute id . 40
145. §18.2.27, “workbook (Workbook)”, p. 1739 . 41
146. §18.3.1.19, “control (Embedded Control)”, p. 1776, attribute id . 41
147. §18.3.1.20, “controlPr (Embedded Control Properties)”, p. 1779, attribute id . 41
148. §18.3.1.22, “customPr (Custom Property)”, p. 1782, attribute id . 42
149. §18.3.1.30, “dataRef (Data Consolidation Reference)”, p. 1790, attribute id . 42
150. §18.3.1.36, “drawing (Drawing)”, p. 1796, attribute id . 42
151. §18.3.1.37, “drawingHF (Drawing Reference in Header Footer)”, pp. 1798–1799, attribute id . 43
152. §18.3.1.47, “hyperlink (Hyperlink)”, p. 1812, attribute id . 43
153. §18.3.1.56, “objectPr (Embedded Object Properties)”, p. 1821, attribute id . 44
154. §18.3.1.59, “oleObject (Embedded Object)”, p. 1824, attribute id . 44
155. §18.3.1.63, “pageSetup (Page Setup Settings)”, p. 1829, attribute id . 44
156. §18.3.1.64, “pageSetup (Chart Sheet Page Setup)”, p. 1832, attribute id . 45
157. §18.3.1.67, “picture (Background Image)”, p. 1837, attribute id . 45
© ISO/IEC 2010 – All rights reserved  vii

ISO/IEC 29500-1:2008/Amd.1:2010(E)

158. §18.3.1.69, “pivotSelection (PivotTable Selection)”, p. 1841, attribute id . 45
159. §18.3.1.94, “tablePart (Table Part)”, p. 1882, attribute id . 46
160. §18.4, “Shared String Table”, pp. 1896–1897 . 46
161. §18.4.1, “charset (Character Set)”, p. 1898 . 46
162. §18.5, “Tables”, p. 1907 . 47
163. §18.6, “Calculation Chain”, pp. 1925–1926 . 47
164. §18.8.18, “family (Font Family)”, p. 1952 . 47
165. §18.9, “Metadata”, p. 1994 . 48
166. §18.10.1.67, “pivotCacheDefinition (PivotCache Definition)”, p. 2095, attribute id . 49
167. §18.10.1.79, “rangeSet (Range Set)”, p. 2154, attribute id . 49
168. §18.10.1.95, “worksheetSource (Worksheet PivotCache Source)”, p. 2170, attribute id . 49
169. §18.11.1.1, “header (Header)”, p. 2180, attribute id . 50
170. §18.14.7, “externalBook (External Workbook)”, p. 2248, attribute id . 50
171. §18.14.11, “oleLink (Generic Object Link Connection)”, p. 2251, attribute id . 50
172. §18.17.2.3, “Cell References”, pp. 2282–2284 . 51
173. §18.17.5.2, “Precision”, p. 2296 . 51
174. §18.17.7.204, “MATCH”, p. 2510 . 51
175. §18.18, “Simple Types”, p. 2664 . 52
176. §18.18.94, “ST_FontFamily (Font Family)”, new subclause. 52
177. §19.2.1.1, “bold (Bold Embedded Font)”, p. 2760, attribute id . 53
178. §19.2.1.2, “boldItalic (Bold Italic Embedded Font)”, pp. 2760–2761, attribute id . 53
179. §19.2.1.11, “ext (Extension)”, p. 2767 . 53
180. §19.2.1.13, “font (Embedded Font Name)”, pp. 2768–2770, attribute various . 54
181. §19.2.1.14, “handoutMasterId (Handout Master ID)”, p. 2771, attribute id . 55
182. §19.2.1.16, “italic (Italic Embedded Font)”, p. 2772, attribute id . 55
183. §19.2.1.20, “notesMasterId (Notes Master ID)”, p. 2778, attribute id . 55
184. §19.2.1.22, “notesSz (Notes Slide Size)”, p. 2779, attribute various . 56
185. §19.2.1.29, “regular (Regular Embedded Font)”, p. 2787, attribute id . 56
186. §19.2.1.31, “sld (Presentation Slide)”, p. 2789, attribute id . 56
187. §19.2.1.33, “sldId (Slide ID)”, p. 2790, attribute id . 57
188. §19.2.1.36, “sldMasterId (Slide Master ID)”, p. 2791, attribute id . 57
189. §19.2.1.40, “SmartTags (SmartTags)”, p. 2795, attribute id . 57
viii  © ISO/IEC 2010 – All rights reserved

ISO/IEC 29500-1:2008/Amd.1:2010(E)
190. §19.2.2.3, “gridSpacing (Grid Spacing)”, p. 2797, attribute various . 58
191. §19.2.2.9, “origin (View Origin)”, p. 2801, attribute various. 58
192. §19.2.2.14, “sld (Presentation Slide)”, p. 2804, attribute id . 59
193. §19.3.1.3, “bgRef (Background Style Reference)”, pp. 2809–2810, attribute idx . 59
194. §19.3.1.4, “blipFill (Picture Fill)”, p. 2812, attribute various . 59
195. §19.3.1.6, “clrMap (Color Scheme Map)”, p. 2814–2815, attribute various . 60
196. §19.3.1.11, “cNvPicPr (Non-Visual Picture Drawing Properties)”, pp. 2817–2818, attribute preferRelativeResize . 62
197. §19.3.1.12, “cNvPr (Non-Visual Drawing Properties)”, pp. 2819–2820, attribute various . 62
198. §19.3.1.13, “cNvSpPr (Non-Visual Drawing Properties for a Shape)”, p. 2821, attribute txBox . 63
199. §19.3.1.14, “ContentPart (Content Part)”, pp. 2821–2824 . 63
200. §19.3.1.14, “ContentPart (Content Part)”, p. 2824, attribute id . 64
201. §19.3.1.17, “custData (Customer Data)”, p. 2826, attribute id . 64
202. §19.3.1.23, “grpSpPr (Group Shape Properties)”, p. 2831, attribute bwMode. 64
203. §19.3.1.40, “sldLayoutId (Slide Layout ID)”, p. 2844, attribute id . 65
204. §19.3.1.44, “spPr (Shape Properties)”, pp. 2847–2848, attribute bwMode . 65
205. §19.3.1.47, “tags (Customer Data Tags)”, p. 2851, attribute id . 65
206. §19.3.1.53, “xfrm (2D Transform for Graphic Frame)”, p. 2856, attribute various . 66
207. §19.3.2.1, “control (Embedded Control)”, p. 2857, attribute id . 66
208. §19.3.2.4, “oleObj (Global Element for Embedded objects and Controls)”, p. 2859, attribute id . 67
209. §19.4.5, “pos (Comment Position)”, p. 2865, attribute various . 67
210. §19.5.68, “snd (Sound)”, p. 2942, attribute various . 68
211. §19.5.70, “sndTgt (Sound Target)”, p. 2943, attribute various. 68
212. §19.7, “Simple Types”, p. 2974 . 69
213. §20.1.2.2.14, “ext (Extension)”, p. 3028 . 69
214. §20.1.2.2.23, “hlinkHover (Hyperlink for Hover)”, p. 3037, attribute id . 69
215. §20.1.2.2.32, “snd (Hyperlink Sound)”, p. 3044, attribute embed . 69
216. §20.1.3.2, “audioFile (Audio from File)”, pp. 3083–3084, attribute link . 70
217. §20.1.3.4, “quickTimeFile (QuickTime from File)”, pp. 3085–3086, attribute link . 70
218. §20.1.3.6, “videoFile (Video from File)”, p. 3088, attribute link. 70
219. §20.1.3.7, “wavAudioFile (Audio from WAV File)”, p. 3089, attribute embed . 71
220. §20.1.8.13, “blip (Blip)”, p. 3187, attribute embed . 71
221. §20.1.10, “Simple Types”, p. 3262 . 71
© ISO/IEC 2010 – All rights reserved  ix

ISO/IEC 29500-1:2008/Amd.1:2010(E)

222. §20.1.10.41, “ST_PercentageDecimal (Percentage as Decimal Number)”, p. 3298 . 72
223. §20.1.10.62, “ST_TextBulletSizePercent (Bullet Size Percentage)”, p. 3420 . 72
224. §20.1.10.87, “ST_TextBulletSize (Bullet Size Percentage)”, new subclause . 72
225. §20.2.2.1, “blipFill (Picture Fill)”, pp. 3450–3451, attribute various . 73
226. §20.2.2.2, “cNvPicPr (Non-Visual Picture Drawing Properties)”, p. 3452, attribute preferRelativeResize . 73
227. §20.2.2.3, “cNvPr (Non-Visual Drawing Properties)”, pp. 3453–3454, attribute various . 74
228. §20.2.2.6, “spPr (Shape Properties)”, p. 3457, attribute bwMode . 75
229. §20.4.2.5, “docPr (Drawing Object Non-Visual Properties)”, pp. 3470–3472, attribute various . 75
230. §20.4.2.7, “extent (Drawing Object Size)”, pp. 3476–3477, attribute various . 76
231. §20.4.2.9, “lineTo (Wrapping Polygon Line End Position)”, p. 3481, attribute various. 76
232. §20.4.2.13, “simplePos (Simple Positioning Coordinates)”, pp. 3485–3486, attribute various . 77
233. §20.4.2.14, “start (Wrapping Polygon Start)”, pp. 3486–3487, attribute various . 77
234. §20.4.3, “Simple Types”, p. 3500 . 78
235. §20.5, “DrawingML – SpreadsheetML Drawing”, pp. 3507–3508 . 78
236. §20.5.2.2, “blipFill (Picture Fill)”, p. 3512, attribute various . 78
237. §20.5.2.7, “cNvPicPr (Non-Visual Picture Drawing Properties)”, p. 3515, attribute preferRelativeResize . 79
238. §20.5.2.8, “cNvPr (Non-Visual Drawing Properties)”, pp. 3516–3517, attribute various . 79
239. §20.5.2.9, “cNvSpPr (Connection Non-Visual Shape Properties)”, p. 3518, attribute txBox . 80
240. §20.5.2.12, “contentPart (Content Part)”, pp. 3519–3523 . 80
241. §20.5.2.12, “contentPart (Content Part)”, p. 3523, attribute id . 81
242. §20.5.2.14, “ext (Shape Extent)”, pp. 3524–3525, attribute various . 81
243. §20.5.2.18, “grpSpPr (Group Shape Properties)”, p. 3529, attribute bwMode. 82
244. §20.5.2.26, “pos (Position)”, p. 3534, attribute various . 82
245. §20.5.2.30, “spPr (Shape Properties)”, p. 3537, attribute bwMode . 83
246. §20.5.2.36, “xfrm (2D Transform for Graphic Frames)”, pp. 3541–3542, attribute various . 83
247. §20.5.3, “Simple Types:, p. 3542 . 83
248. §21.1.2.3.5, “hlinkClick (Click Hyperlink)”, p. 3610, attribute id . 84
249. §21.1.2.3.6, “hlinkMouseOver (Mouse-Over Hyperlink)”, p. 3612, attribute id . 84
250. §21.2.2.21, “bubbleScale (Bubble Scale)”, p. 3767 . 84
251. §21.2.2.26, “chart (Reference to Chart Part)”, p. 3770, attribute id. 85
252. §21.2.2.30, “clrMapOvr (Color Map Override)”, pp. 3773–3775, attribute various . 85
253. §21.2.2.41, “depthPercent (Depth Percent)”, p. 3780 . 87
x  © ISO/IEC 2010 – All rights reserved

ISO/IEC 29500-1:2008/Amd.1:2010(E)
254. §21.2.2.63, “externalData (External Data Relationship)”, p. 3790, attribute id . 87
255. §21.2.2.74, “gapDepth (Gap Depth)”, p. 3795, attribute val . 88
256. §21.2.2.75, “gapWidth (Gap Width)”, p. 3796, attribute val . 88
257. §21.2.2.82, “holeSize (Hole Size)”, p. 3799, attribute val . 88
258. §21.2.2.83, “hPercent (Height Percent)”, p. 3800 . 88
259. §21.2.2.91, “lblOffset (Label Offset)”, p. 3803, attribute val. 88
260. §21.2.2.131, “overlap (Overlap)”, p. 3820, attribute val . 89
261. §21.2.2.136, “perspective (Perspective)”, p. 3827, attribute val. 89
262. §21.2.2.164, “secondPieSize (Second Pie Size)”, p. 3839, attribute val . 89
263. §21.2.2.197, “spPr (Shape Properties)”, p. 3858, attribute bwMode . 89
264. §21.2.2.206, “thickness (Thickness)”, pp. 3861–3862, attribute val . 90
265. §21.2.2.221, “userShapes (Reference to Chart Drawing Part)”, p. 3868, attribute id .
...