ISO 5019-1:1984
(Main)Refractory bricks - Dimensions - Part 1: Rectangular bricks
Refractory bricks - Dimensions - Part 1: Rectangular bricks
This part of ISO specifies the dimensions ot two series of rectangular refractory bricks. These two series of bricks may be used in conjunction with the series of arch bricks whose dimensions are specified in ISO 5019/2. However, the sizes of refractory bricks here listed are only a limited number of the size currently in production in many countries, but it is believed that size specified in this document include those most commonly used in furnace construction.
Briques réfractaires — Dimensions — Partie 1: Briques rectangulaires
General Information
- Status
- Published
- Publication Date
- 31-Aug-1984
- Technical Committee
- ISO/TC 33 - Refractories
- Drafting Committee
- ISO/TC 33 - Refractories
- Current Stage
- 9093 - International Standard confirmed
- Start Date
- 19-Sep-2025
- Completion Date
- 13-Dec-2025
Relations
- Consolidated By
ISO 7899-2:2000 - Water quality - Detection and enumeration of intestinal enterococci - Part 2: Membrane filtration method - Effective Date
- 06-Jun-2022
- Effective Date
- 15-Apr-2008
Overview
ISO 5019-1:1984 - Refractory bricks - Dimensions - Part 1: Rectangular bricks specifies standardized dimensions for rectangular refractory bricks used in industrial furnace construction. Published by ISO and prepared by Technical Committee ISO/TC 33 (Refractories), this first-edition standard defines two size series (64 mm and 76 mm thickness series) and lists the most commonly used brick sizes in millimetres. The document replaces the earlier ISO Recommendation R 475-1966.
Key topics and requirements
- Two series of dimensions: a 64 mm series and a 76 mm series (dimensions given in millimetres).
- Typical sizes included: examples from the standard include:
- Squares/straight: 230 × 114 × 64 and 230 × 114 × 76; 230 × 172 × 64 and 230 × 172 × 76; 345 × 114 × 64 and 345 × 114 × 76
- Splits: 230 × 114 × 32 and 230 × 114 × 38
- Tiles: 230 × 230 × 64 and 230 × 230 × 76
- Recommendation: adoption of the 76 mm series is strongly recommended.
- Tolerances: dimensional tolerances are not fixed in the standard; they are to be agreed between purchaser and supplier.
- Interoperability: the rectangular brick series may be used in conjunction with arch bricks whose dimensions are specified in ISO 5019‑2.
- Scope limitation: the standard covers a limited set of sizes but aims to include those most commonly used in furnace construction. It notes that some North American brick sizes closely approximate the listed dimensions (in North America a “square” is often called a “straight”).
Applications
ISO 5019-1 is directly useful for:
- Refractory manufacturers standardizing product lines
- Furnace, kiln and hearth designers specifying brickwork dimensions
- Procurement and quality control teams agreeing dimensions and tolerances with suppliers
- Foundries, steelworks, glass and ceramic plant engineers involved in rebuilding or maintaining refractory linings
- Contractors and installation engineers ensuring compatibility between modular bricks and arch elements
Using a common dimensional standard helps reduce onsite cutting, simplifies inventory, and improves interchangeability of refractory components.
Related standards
- ISO 5019-2 - Refractory bricks - Dimensions - Part 2: Arch bricks (for arch/curved brick dimensions)
- ISO/TC 33 publications and related refractory material standards
Keywords: ISO 5019-1, refractory bricks, rectangular bricks, brick dimensions, furnace construction, 64 mm series, 76 mm series, refractory standards, ISO refractory.
Frequently Asked Questions
ISO 5019-1:1984 is a standard published by the International Organization for Standardization (ISO). Its full title is "Refractory bricks - Dimensions - Part 1: Rectangular bricks". This standard covers: This part of ISO specifies the dimensions ot two series of rectangular refractory bricks. These two series of bricks may be used in conjunction with the series of arch bricks whose dimensions are specified in ISO 5019/2. However, the sizes of refractory bricks here listed are only a limited number of the size currently in production in many countries, but it is believed that size specified in this document include those most commonly used in furnace construction.
This part of ISO specifies the dimensions ot two series of rectangular refractory bricks. These two series of bricks may be used in conjunction with the series of arch bricks whose dimensions are specified in ISO 5019/2. However, the sizes of refractory bricks here listed are only a limited number of the size currently in production in many countries, but it is believed that size specified in this document include those most commonly used in furnace construction.
ISO 5019-1:1984 is classified under the following ICS (International Classification for Standards) categories: 81.080 - Refractories. The ICS classification helps identify the subject area and facilitates finding related standards.
ISO 5019-1:1984 has the following relationships with other standards: It is inter standard links to ISO 7899-2:2000, ISO/R 475:1966. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
ISO 5019-1:1984 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
International Standard
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION*ME~I(aYHAPO~liAR OPTAHM3Al&lR IlO CTAH~APTbl3AlJ4t’WORGANISATION INTERNATIONALE DE NORMALISATION
Refractory bricks - Dimensions -
Part 1 : Rectangular bricks
Briques refractaires - Dimensions - Partie I : Briques rectangulaires
First edition - 1984-09-15
U DC 666.76.43
Ref. No. IS0 5019/l-1984 (E)
Descriptors : refractory materials, bricks, dimensions.
Price based on 2 pages
Foreword
IS0 (the International Organization for Standardization) is a worldwide federation of
national standards bodies (IS0 member bodies). The work of preparing International
Standards is normally carried out through IS0 technical committees. Every member
body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, govern-
mental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to .
the member bodies for approval before their acceptance as International Standards by
the IS0 Council. They are approved in accordance with IS0 procedures requiring at
least 75 % approval by the member bodies voting.
International Standard IS0 5019/l was prepared Technical Committee lSO/TC 33,
bY
Refractories.
It cancels and replaces IS0 Recommendation R 475-1966 of which it constitutes a
technical revision.
International Organization for Standardization, 1984
Printed in Switzerland
IS0 5019/l-1984 (E)
INTERNATIONAL STANDARD
Refractory bricks - Dimensions -
Part 1: Rectangular bricks
0 Introducti
...
Norme internationale
INTERNATIONAL ORGANIZATION FOR STANDARDIZATIONWvlEX~YHAPO~HAR OPTAHM3AlJMR fl0 CTAH/1APTUl3A~Wl*ORGANISAilON INTERNATIONALE DE NORMALISATION
Briques réfractaires - Dimensions -
Partie 1 : Briques rectangulaires
Refractory bricks - Dimensions - Part I : Rectangular bricks
Première édition - 1984-09-15
z
Y
Réf. no : ISO 5019/1-1984 (F)
CDU 666.7643
6)
-
l
Descripteurs : produit réfractaire, brique, dimension.
c
6,
-
z
Prix basé sur 2 pages
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (comités membres de I’ISO). L’élaboration
des Normes internationales est confiée aux comités techniques de I’ISO. Chaque
comité membre intéressé par une étude a le droit de faire partie du comité technique
créé à cet effet. Les organisations internationales, gouvernementales et non gouverne-
mentales, en liaison avec I’ISO, participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont soumis
aux comités membres pour approbation, avant leur acceptation comme Normes inter-
nationales par le Conseil de I’ISO. Les Normes internationales sont approuvées confor-
mément aux procédures de I’ISO qui requièrent l’approbation de 75 % au moins des
comités membres votants.
La Norme internationale ISO 5019/1 a été élaborée par le comité technique ISO/TC 33,
Matériaux réfrac taires.
Elle annule et remplace la Recommandation ISO/R 475-1966 dont elle constitue une
révision technique.
@ Organisation internationale de normalisation, 1984 0
Imprimé en Suisse
NORME INTERNATIONALE
ISO 5019/1-1984 (F)
Briques réfractaires - Dimensions -
Partie 1: Briques rectangulaires
0 Introduction 2 Référence
II sera évident à tous les utilisateurs de la p
...
Norme internationale
INTERNATIONAL ORGANIZATION FOR STANDARDIZATIONWvlEX~YHAPO~HAR OPTAHM3AlJMR fl0 CTAH/1APTUl3A~Wl*ORGANISAilON INTERNATIONALE DE NORMALISATION
Briques réfractaires - Dimensions -
Partie 1 : Briques rectangulaires
Refractory bricks - Dimensions - Part I : Rectangular bricks
Première édition - 1984-09-15
z
Y
Réf. no : ISO 5019/1-1984 (F)
CDU 666.7643
6)
-
l
Descripteurs : produit réfractaire, brique, dimension.
c
6,
-
z
Prix basé sur 2 pages
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (comités membres de I’ISO). L’élaboration
des Normes internationales est confiée aux comités techniques de I’ISO. Chaque
comité membre intéressé par une étude a le droit de faire partie du comité technique
créé à cet effet. Les organisations internationales, gouvernementales et non gouverne-
mentales, en liaison avec I’ISO, participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont soumis
aux comités membres pour approbation, avant leur acceptation comme Normes inter-
nationales par le Conseil de I’ISO. Les Normes internationales sont approuvées confor-
mément aux procédures de I’ISO qui requièrent l’approbation de 75 % au moins des
comités membres votants.
La Norme internationale ISO 5019/1 a été élaborée par le comité technique ISO/TC 33,
Matériaux réfrac taires.
Elle annule et remplace la Recommandation ISO/R 475-1966 dont elle constitue une
révision technique.
@ Organisation internationale de normalisation, 1984 0
Imprimé en Suisse
NORME INTERNATIONALE
ISO 5019/1-1984 (F)
Briques réfractaires - Dimensions -
Partie 1: Briques rectangulaires
0 Introduction 2 Référence
II sera évident à tous les utilisateurs de la p
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...