Portable chain-saws — Chain brake performance

ISO 6535:2015 specifies methods for measuring the braking time and release force of manually operated chain brakes on portable hand-held chain-saws.

Scies à chaîne portatives — Performance du frein de chaîne

ISO 6535:2015 spécifie les méthodes de mesurage du temps de freinage et de la force d'enclenchement des freins de chaîne commandés manuellement des scies à chaîne portatives à main.

General Information

Status
Published
Publication Date
16-Aug-2015
Current Stage
9093 - International Standard confirmed
Completion Date
25-Mar-2021
Ref Project

Relations

Buy Standard

Standard
ISO 6535:2015 - Portable chain-saws -- Chain brake performance
English language
4 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 6535:2015 - Scies a chaîne portatives -- Performance du frein de chaîne
French language
4 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 6535
Fourth edition
2015-08-15
Portable chain-saws — Chain brake
performance
Scies à chaîne portatives — Performance du frein de chaîne
Reference number
ISO 6535:2015(E)
©
ISO 2015

---------------------- Page: 1 ----------------------
ISO 6535:2015(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2015 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 6535:2015(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Test objects . 1
5 Apparatus . 1
6 Chain-saw preparation . 2
7 Procedure. 2
7.1 Release force (static test) . 2
7.2 Braking time . 2
7.2.1 General. 2
7.2.2 First measurement of braking times (in new condition) . 3
7.2.3 Preliminary running . 3
7.2.4 Second measurement of braking times . 3
7.2.5 Interim actuations . 3
7.2.6 Third measurement of braking times . 3
8 Report . 3
8.1 Braking time . 3
8.2 Release force . 3
8.3 Chain lubrication oil . 3
© ISO 2015 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 6535:2015(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical
Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information
The committee responsible for this document is ISO/TC 23, Tractors and machinery for agriculture and
forestry, Subcommittee SC 17, Manually portable forest machinery.
This fourth edition cancels and replaces the third edition (ISO 6535:2008), which has b
...

NORME ISO
INTERNATIONALE 6535
Quatrième édition
2015-08-15
Scies à chaîne portatives —
Performance du frein de chaîne
Portable chain-saws — Chain brake performance
Numéro de référence
ISO 6535:2015(F)
©
ISO 2015

---------------------- Page: 1 ----------------------
ISO 6535:2015(F)

DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2015, Publié en Suisse
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni utilisée
sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie, l’affichage sur
l’internet ou sur un Intranet, sans autorisation écrite préalable. Les demandes d’autorisation peuvent être adressées à l’ISO à
l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2015 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 6535:2015(F)

Sommaire Page
Avant-propos .iv
1 Domaine d’application . 1
2 Références normatives . 1
3 Termes et définitions . 1
4 Matériels soumis à essai . 1
5 Appareillage . 1
6 Préparation de la scie à chaîne . 2
7 Mode opératoire. 2
7.1 Force d’enclenchement (essai statique) . 2
7.2 Temps de freinage . 2
7.2.1 Généralités . 2
7.2.2 Premier mesurage des temps de freinage (dans la nouvelle condition) . 3
7.2.3 Échauffement préliminaire . 3
7.2.4 Deuxième mesurage des temps de freinage . 3
7.2.5 Actionnements intérimaires . 3
7.2.6 Troisième mesurage des temps de freinage . 3
8 Rapport d’essai . 3
8.1 Temps de freinage . 3
8.2 Force d’enclenchement . 3
8.3 Huile de lubrification de la chaîne . 3
© ISO 2015 – Tous droits réservés iii

---------------------- Page: 3 ----------------------
ISO 6535:2015(F)

Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale d’organismes
nationaux de normalisation (comités membres de l’ISO). L’élaboration des Normes internationales est
en général confiée aux comités techniques de l’ISO. Chaque comité membre intéressé par une étude
a le droit de faire partie du comité technique créé à cet effet. Les organisations internationales,
gouvernementales et non gouvernementales, en liaison avec l’ISO participent également aux travaux.
L’ISO collabore étroitement avec la Commission électrotechnique internationale (IEC) en ce qui
concerne la normalisation électrotechnique.
Les procédures utilisées pour élaborer le présent document et celles destinées à sa mise à jour sont
décrites dans les Directives ISO/IEC, Partie 1. Il convient, en particulier de prendre note des différents
critères d’approbation requis pour les différents types de documents ISO. Le présent document a été
rédigé conformément aux règles de rédaction données dans les Directives ISO/IEC, Partie 2 (voir www.
iso.org/directives).
L’attention est appelée sur le fait que certains des éléments du présent document peuvent faire l’objet de
droits de propriété intellectuelle ou de droits analogues. L’ISO ne saurait être tenue pour responsable
de ne pas avoir identifié de tels droits de propriété et averti de leur existence. Les détails concernant
les références aux droits de propriété intellectuelle ou autres droits analogues identifiés lors de
l’élaboration du document sont indiqués dans l’Introduction et/ou dans la liste des déclarations de
brevets reçues par l’ISO (voir www.iso.org/brevets).
Les appellations commerciales éventuellement mentionnées dans le présent document sont données
pour information, par souci de commodité, à l’intention des utilisateurs et ne sauraient constituer
un engagement.
Pour une explication de la signification des termes et expressions spécifiques de l’ISO liés à
l’évaluation de la conformité, ou pour toute information au sujet de l’adhésion de l’ISO aux principes
de l’OMC concernant les obstacles techniques au commerce (OTC), voir le lien suivant: Avant-propos —
Informations supplémentaires.
Le comité chargé de l’élaboration du présent document est l’ISO/TC 23, Tracteurs et matériels agricoles
et forestiers, sous-comité SC 17, Matériel forestier portatif à main.
Cette quatrième édition annule et remplace la troisième édition (ISO 6535:2008), qui a fait l’objet d’une
révision technique.
iv © ISO 2015 – Tous droits réservés

---------------------- Page: 4 ----------------------
NORME INTERNATIONALE ISO 6535:2015(F)
Scies à chaîne portatives — Performance du frein de chaîne
1 Domaine d’application
La présente Norme internationale spécifie les méthodes de mesurage du temps de freinage et de la force
d’enclenchement des freins de chaîne commandés manuellement des scies à chaîne portatives à main.
2 Références normatives
Les documents suivants, en tout ou partie, sont référ
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.