ISO 1833-15:2019
(Main)Textiles - Quantitative chemical analysis - Part 15: Mixtures of jute with certain animal fibres (method by determining nitrogen content)
Textiles - Quantitative chemical analysis - Part 15: Mixtures of jute with certain animal fibres (method by determining nitrogen content)
This document specifies a method, by determining the nitrogen content, to calculate the proportion of each component, after the removal of non-fibrous matter, in textiles made of mixtures of - jute with - animal fibres. The animal-fibre component can consist solely of hair or wool, or of any mixtures of the two. This document is not applicable to products in which dyestuffs or finishes contain nitrogen. NOTE Because this method differs in principle from the general method based on selective solubility set out in ISO 1833-1, it is given in a form that is complete in itself.
Textiles — Analyse chimique quantitative — Partie 15: Mélanges de jute avec certaines fibres animales (méthode par détermination de la teneur en azote)
This document specifies a method, by determining the nitrogen content, to calculate the proportion of each component, after the removal of non-fibrous matter, in textiles made of mixtures of — jute with — animal fibres. The animal-fibre component can consist solely of hair or wool, or of any mixtures of the two. This document is not applicable to products in which dyestuffs or finishes contain nitrogen. NOTE Because this method differs in principle from the general method based on selective solubility set out in ISO 1833-1, it is given in a form that is complete in itself.
General Information
- Status
- Published
- Publication Date
- 05-Nov-2019
- Technical Committee
- ISO/TC 38 - Textiles
- Drafting Committee
- ISO/TC 38/WG 22 - Composition and chemical testing
- Current Stage
- 9093 - International Standard confirmed
- Start Date
- 11-Jul-2025
- Completion Date
- 13-Dec-2025
Relations
- Effective Date
- 11-Nov-2017
Overview
ISO 1833-15:2019 specifies a quantitative chemical analysis method for determining the composition of textiles that are mixtures of jute and certain animal fibres (wool and/or hair). The method calculates the proportion of each component by determining the total nitrogen content (Kjeldahl principle) after removal of non-fibrous matter. This part of ISO 1833 is a complete standalone procedure because its principle (nitrogen determination) differs from the selective-solubility methods in ISO 1833‑1. Note: the method is not applicable to products containing nitrogenous dyestuffs or nitrogen-containing finishes.
Key Topics and Requirements
- Scope and applicability
- Mixtures of jute with wool and/or hair; animal-fibre component may be hair, wool, or their blend.
- Excludes textiles with nitrogen-containing dyes or finishes.
- Sample preparation
- Representative reduced laboratory sample per ISO 5089.
- Solvent extraction in a Soxhlet (toluene:methanol 1:3) and aqueous extraction to remove non-fibrous matter.
- Drying to constant mass before analysis.
- Analytical principle
- Kjeldahl mineralization (H2SO4 with potassium sulfate and selenium dioxide) to convert organic nitrogen to ammonium sulfate.
- Alkaline distillation and trapping in boric acid, followed by titration with standardized sulfuric acid.
- Use of Kjeldahl distillation apparatus and titrator (accuracy ~0.05 ml).
- Calculations
- Percent nitrogen in the dehydrated test portion computed from titration volumes and acid concentration.
- Conversion to fibre composition using prescribed nitrogen contents: jute = 0.22% N, animal fibres = 16.2% N, and the provided formula (ISO 1833-15:2019) to calculate percent animal fibre.
- Reagents and safety
- Analytical-grade reagents: toluene, methanol, sulfuric acid, potassium sulfate, selenium dioxide, NaOH, boric acid.
- Safety precautions for toxic solvents and strong acids required.
Applications and Users
- Textile testing laboratories performing composition analysis for incoming materials, incoming quality control, and product verification.
- Manufacturers of blended jute products who need accurate blend ratios for labelling, process control, and quality assurance.
- Standards and conformity bodies verifying compliance with product specifications or regulations.
- Industry R&D and forensic textile analysts requiring reliable quantitative composition data where selective-solubility methods are unsuitable.
Keywords: ISO 1833-15:2019, textiles quantitative chemical analysis, jute blends, nitrogen determination, Kjeldahl method, Soxhlet extraction, textile composition analysis.
Related Standards
- ISO 1833-1 - General principles of quantitative chemical analysis of textiles (selective solubility methods).
- ISO 5089 - Preparation of reduced laboratory samples and test specimens for chemical tests.
ISO 1833-15:2019 - Textiles — Quantitative chemical analysis — Part 15: Mixtures of jute with certain animal fibres (method by determining nitrogen content) Released:11/6/2019
ISO 1833-15:2019 - Textiles — Analyse chimique quantitative — Partie 15: Mélanges de jute avec certaines fibres animales (méthode par détermination de la teneur en azote) Released:11/6/2019
Frequently Asked Questions
ISO 1833-15:2019 is a standard published by the International Organization for Standardization (ISO). Its full title is "Textiles - Quantitative chemical analysis - Part 15: Mixtures of jute with certain animal fibres (method by determining nitrogen content)". This standard covers: This document specifies a method, by determining the nitrogen content, to calculate the proportion of each component, after the removal of non-fibrous matter, in textiles made of mixtures of - jute with - animal fibres. The animal-fibre component can consist solely of hair or wool, or of any mixtures of the two. This document is not applicable to products in which dyestuffs or finishes contain nitrogen. NOTE Because this method differs in principle from the general method based on selective solubility set out in ISO 1833-1, it is given in a form that is complete in itself.
This document specifies a method, by determining the nitrogen content, to calculate the proportion of each component, after the removal of non-fibrous matter, in textiles made of mixtures of - jute with - animal fibres. The animal-fibre component can consist solely of hair or wool, or of any mixtures of the two. This document is not applicable to products in which dyestuffs or finishes contain nitrogen. NOTE Because this method differs in principle from the general method based on selective solubility set out in ISO 1833-1, it is given in a form that is complete in itself.
ISO 1833-15:2019 is classified under the following ICS (International Classification for Standards) categories: 59.060.01 - Textile fibres in general. The ICS classification helps identify the subject area and facilitates finding related standards.
ISO 1833-15:2019 has the following relationships with other standards: It is inter standard links to ISO 1833-15:2006. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
ISO 1833-15:2019 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 1833-15
Second edition
2019-11
Textiles — Quantitative chemical
analysis —
Part 15:
Mixtures of jute with certain animal
fibres (method by determining
nitrogen content)
Textiles — Analyse chimique quantitative —
Partie 15: Mélanges de jute avec certaines fibres animales (méthode
par détermination de la teneur en azote)
Reference number
©
ISO 2019
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Reagents . 1
6 Apparatus . 2
7 Sampling and pre-treatment of laboratory test sample . 2
7.1 Sampling . 2
7.2 Pre-treatment of laboratory test sample . 2
8 Test procedure . 3
9 Calculation and expression of results . 4
10 Precision . 4
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/
iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 38, Textiles.
This second edition cancels and replaces the first edition (ISO 1833-15:2006), which has been
technically revised. The main changes compared to the previous edition are as follows:
— the title has been changed from “Mixtures of jute and certain animal fibres (method by determining
nitrogen content)” to “Mixtures of jute with certain animal fibres (method by determining nitrogen
content)”;
— in Clause 2, reference to ISO 5089 for sampling principle has been added;
— the mandatory Clause 3, "Terms and definitions", has been added;
— in Clause 9, Formula (1) has been corrected.
A list of all parts in the ISO 1833 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/ members .html.
iv © ISO 2019 – All rights reserved
INTERNATIONAL STANDARD ISO 1833-15:2019(E)
Textiles — Quantitative chemical analysis —
Part 15:
Mixtures of jute with certain animal fibres (method by
determining nitrogen content)
1 Scope
This document specifies a method, by determining the nitrogen content, to calculate the proportion of
each component, after the removal of non-fibrous matter, in textiles made of mixtures of
— jute
with
— animal fibres.
The animal-fibre component can consist solely of hair or wool, or of any mixtures of the two.
This document is not applicable to products in which dyestuffs or finishes contain
...
NORME ISO
INTERNATIONALE 1833-15
Deuxième édition
2019-11
Textiles — Analyse chimique
quantitative —
Partie 15:
Mélanges de jute avec certaines fibres
animales (méthode par détermination
de la teneur en azote)
Textiles — Quantitative chemical analysis —
Part 15: Mixtures of jute with certain animal fibres (method by
determining nitrogen content)
Numéro de référence
©
ISO 2019
DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2019
Tous droits réservés. Sauf prescription différente ou nécessité dans le contexte de sa mise en œuvre, aucune partie de cette
publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique,
y compris la photocopie, ou la diffusion sur l’internet ou sur un intranet, sans autorisation écrite préalable. Une autorisation peut
être demandée à l’ISO à l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Genève
Tél.: +41 22 749 01 11
Fax: +41 22 749 09 47
E-mail: copyright@iso.org
Web: www.iso.org
Publié en Suisse
ii © ISO 2019 – Tous droits réservés
Sommaire Page
Avant-propos .iv
1 Domaine d’application . 1
2 Références normatives . 1
3 Termes et définitions . 1
4 Principe . 1
5 Réactifs . 2
6 Appareillage . 2
7 Échantillonnage et prétraitement de l’échantillon . 2
7.1 Échantillonnage . 2
7.2 Prétraitement de l’échantillon réduit . 2
8 Mode opératoire d’essai. 3
9 Calcul et expression des résultats . 4
10 Fidélité . 4
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes
nationaux de normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est
en général confiée aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude
a le droit de faire partie du comité technique créé à cet effet. Les organisations internationales,
gouvernementales et non gouvernementales, en liaison avec l'ISO participent également aux travaux.
L'ISO collabore étroitement avec la Commission électrotechnique internationale (IEC) en ce qui
concerne la normalisation électrotechnique.
Les procédures utilisées pour élaborer le présent document et celles destinées à sa mise à jour sont
décrites dans les Directives ISO/IEC, Partie 1. Il convient, en particulier, de prendre note des différents
critères d'approbation requis pour les différents types de documents ISO. Le présent document a été
rédigé conformément aux règles de rédaction données dans les Directives ISO/IEC, Partie 2 (voir www
.iso .org/ directives).
L'attention est attirée sur le fait que certains des éléments du présent document peuvent faire l'objet de
droits de propriété intellectuelle ou de droits analogues. L'ISO ne saurait être tenue pour responsable
de ne pas avoir identifié de tels droits de propriété et averti de leur existence. Les détails concernant
les références aux droits de propriété intellectuelle ou autres droits analogues identifiés lors de
l'élaboration du document sont indiqués dans l'Introduction et/ou dans la liste des déclarations de
brevets reçues par l'ISO (voir www .iso .org/ brevets).
Les appellations commerciales éventuellement mentionnées dans le présent document sont données
pour information, par souci de commodité, à l’intention des utilisateurs et ne sauraient constituer un
engagement.
Pour une explication de la nature volontaire des normes, la signification des termes et expressions
spécifiques de l'ISO liés à l'évaluation de la conformité, ou pour toute information au sujet de l'adhésion
de l'ISO aux principes de l’Organisation mondiale du commerce (OMC) concernant les obstacles
techniques au commerce (OTC), voir www .iso .org/ avant -propos.
Le présent document a été élaboré par le comité technique ISO/TC 38, Textiles.
Cette deuxième édition annule et remplace la première édition (ISO 1833-15:2006), qui a fait l’objet
d’une révision technique. Les principales modifications par rapport à l’édition précédente sont les
suivantes:
— le titre a été modifié de «Mélanges de jute et de certaines fibres animales (méthode par dosage de
l’azote)» en «Mélanges de jute avec certaines fibres animales (méthode par détermination de la
teneur en azote)»;
— à l’Article 2, la référence à l’ISO 5089 pour le principe d’échantillonnage a été ajoutée;
— l’Article 3, «Termes et définitions», obligatoire a été ajouté;
— à l’Article 9, la Formule (1) a été corrigée.
Une liste de toutes les parties de la série ISO 1833 se trouve sur le site web de l’ISO.
Il convient que l’utilisateur adresse tout retour d’information ou toute question concernant le présent
document à l’organisme national de normalisation de son pays. Une liste exhaustive desdits organismes
se trouve à l’adresse www .iso .org/ fr/ members .html.
iv © ISO 2019 – Tous droits réservés
NORME INTERNATIONALE ISO 1833-15:2019(F)
Textiles — Analyse chimique quantitative —
Partie 15:
Mélanges de jute avec certaines fibres animales (méthode
par détermination de la teneur en azote)
1 Domaine d’application
Le présent document spécifie une méthode, par détermination de la teneur en azote, de la proportion
de chaque constituant, après élimination des matières non fibreuses, dans les textiles composés de
mélanges de
— jute
avec
— des fibres animales.
La fibre animale constituante peut être soit du poil seul, soit de la laine seule, soit un mélange des deux.
Le présent document ne s’applique pas aux produits contenant des colorants ou des apprêts azotés.
NOTE Étant donné que cette méthode diffère, de par son principe, de la méthode générale basée sur la
dissolution sélective
...














Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...