Road vehicles — Brake lining friction materials — Standard performance test procedure for commercial vehicles with air brakes

ISO 26865:2009 applies to commercial vehicles of the categories M2, M3, N2, N3, O3 and O4, as defined in UNECE R.E.3, which are equipped with air brakes. ISO 26865:2009 applies during product development, product prototypes, product specification or validation, and ongoing series production, as defined in ISO 15484. When used in conjunction with other applicable standards or test procedures, ISO 26865:2009 is intended to provide a complete assessment of a friction material's adequacy for use in a certain application, market or vehicle platform. ISO 26865:2009 does not include performance requirements related to stopping distance or braking force distribution, under different vehicle conditions of speed, temperature, tyre-to-road adhesion, loads and operating conditions of the braking system, as indicated in Federal Codes or Regulations. ISO 26865:2009 specifies a single-ended inertia-dynamometer performance procedure, which is intended to standardize the various procedures for commercial vehicles equipped with air brakes into one unique procedure covering all performance requirements of interest. The test sequence includes performance evaluation for the following conditions: performance test before and after bedding; brake fade after bedding and after moderate temperature; sensitivity to temperature, speed and pressure influence; downhill simulation; brake recovery.

Véhicules routiers — Matériaux de friction pour garnitures de freins — Mode opératoire d'essai des performances normalisées pour les véhicules utilitaires munis de freins à air comprimé

General Information

Status
Published
Publication Date
01-Mar-2009
Current Stage
9020 - International Standard under periodical review
Start Date
15-Apr-2024
Completion Date
15-Apr-2024
Ref Project

Buy Standard

Standard
ISO 26865:2009 - Road vehicles -- Brake lining friction materials -- Standard performance test procedure for commercial vehicles with air brakes
English language
14 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 26865
First edition
2009-03-15

Road vehicles — Brake lining friction
materials — Standard performance test
procedure for commercial vehicles with
air brakes
Véhicules routiers — Matériaux de friction pour garnitures de freins —
Mode opératoire d'essai des performances normalisées pour les
véhicules utilitaires munis de freins à air comprimé




Reference number
ISO 26865:2009(E)
©
ISO 2009

---------------------- Page: 1 ----------------------
ISO 26865:2009(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


COPYRIGHT PROTECTED DOCUMENT


©  ISO 2009
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2009 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 26865:2009(E)
Contents Page
Foreword. iv
Introduction . v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions. 2
4 Symbols . 3
5 Sampling. 3
6 Test method. 3
6.1 Principle. 3
6.2 Test equipment and parts . 3
6.3 Test conditions . 4
6.4 Test procedure for disc brake systems. 5
6.5 Test procedure for drum brake systems. 9
6.6 Expression of results . 12
7 Test report . 13
7.1 Tabular report. 13
7.2 Summary of results . 13
7.3 Lining data sheet . 13

© ISO 2009 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 26865
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.