Rubber — Determination of metal content by atomic absorption spectrometry — Part 2: Determination of lead content

This document specifies an atomic absorption spectrometric method for the determination of the lead content of rubbers. The method is applicable to raw rubber and rubber products. There is no limit to the concentration of lead that can be determined. High or low concentrations can be determined, provided that suitable adjustments are made to the mass of the test portion and/or the concentration of the solutions used. The use of the standard-additions method might lower the bottom limit of detection.

Caoutchouc — Détermination de la teneur en métal par spectrométrie d'absorption atomique — Partie 2: Dosage du plomb

General Information

Status
Published
Publication Date
28-Nov-2019
Current Stage
9060 - Close of review
Start Date
02-Sep-2029
Ref Project

Relations

Buy Standard

Standard
ISO 6101-2:2019 - Rubber -- Determination of metal content by atomic absorption spectrometry
English language
10 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 6101-2
Third edition
2019-11
Rubber — Determination of metal
content by atomic absorption
spectrometry —
Part 2:
Determination of lead content
Caoutchouc — Détermination de la teneur en métal par
spectrométrie d'absorption atomique —
Partie 2: Dosage du plomb
Reference number
ISO 6101-2:2019(E)
©
ISO 2019

---------------------- Page: 1 ----------------------
ISO 6101-2:2019(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 6101-2:2019(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Reagents . 2
6 Apparatus . 3
7 Sampling . 3
8 Procedure. 4
8.1 Test portion . 4
8.2 Preparation of test solution . 4
8.2.1 Destruction of organic matter . 4
8.2.2 Dissolution of inorganic residue . 4
8.3 Preparation of the calibration graph . 5
8.3.1 Preparation of calibration solutions . 5
8.3.2 Spectrometric measurements . 5
8.3.3 Plotting the calibration graph . 5
8.4 Determination . 5
8.4.1 Spectrometric measurements .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.