ISO 59020
(Main)Circular economy — Measuring and assessing circularity performance
Circular economy — Measuring and assessing circularity performance
This document specifies requirements and gives guidance to organizations for measuring and assessing a defined economic system to determine their circularity performance at a specific time. Measurement and assessment are performed by the collection and calculation of data with the help of mandatory and optional circularity indicators. This document provides a framework to guide users within organizations of all types and sizes through the measurement and assessment process, including system boundary setting and choice of indicators, as well as processing and interpreting data in a consistent and reproducible manner to generate meaningful and verifiable results. The framework is applicable to multiple levels of an economic system, ranging from regional, interorganizational and organizational to the product level. To measure and assess social, environmental and economic impacts that are caused by the actions of the organization to achieve circular goals and objectives, the document provides a list of complementary methods that can be used in addition to this document.
Économie circulaire — Mesure et évaluation de la performance de circularité
Le présent document fournit des exigences et recommandations pour aider les organismes à mesurer et évaluer un système économique défini afin d’en déterminer la performance de circularité à un moment précis. La mesure et l’évaluation sont effectuées par la collecte et le calcul de données à l’aide d’indicateurs de circularité obligatoires et facultatifs. Le présent document fournit un cadre pour orienter les utilisateurs au sein d’organismes de tous types et de toutes tailles tout au long du processus de mesure et d’évaluation, y compris la définition des frontières du système et le choix des indicateurs, ainsi que le traitement et l’interprétation des données de manière cohérente et reproductible afin de générer des résultats significatifs et vérifiables. Le cadre s’applique à plusieurs niveaux d’un système économique, du niveau régional au niveau produit, en passant par les niveaux organisationnel et interorganisationnel. Pour mesurer et évaluer les impacts sociaux, environnementaux et économiques causés par les actions de l’organisme pour atteindre des objectifs et cibles circulaires, le présent document fournit une liste de méthodes complémentaires qu’il est possible d’utiliser en complément du présent document.
General Information
Buy Standard
Standards Content (Sample)
FINAL DRAFT
International
Standard
ISO/FDIS 59020
ISO/TC 323
Circular economy — Measuring and
Secretariat: AFNOR
assessing circularity performance
Voting begins on:
2024-02-20
Voting terminates on:
2024-04-16
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO
LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
Reference number
ISO/FDIS 59020:2024(en) © ISO 2024
---------------------- Page: 1 ----------------------
FINAL DRAFT
ISO/FDIS 59020:2024(en)
International
Standard
ISO/FDIS 59020
ISO/TC 323
Circular economy — Measuring and
Secretariat: AFNOR
assessing circularity performance
Voting begins on:
Voting terminates on:
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
COPYRIGHT PROTECTED DOCUMENT
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
© ISO 2024
IN ADDITION TO THEIR EVALUATION AS
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO
LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
or ISO’s member body in the country of the requester.
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/FDIS 59020:2024(en) © ISO 2024
© ISO 2024 – All rights reserved
ii
---------------------- Page: 2 ----------------------
ISO/FDIS 59020:2024(en)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
3.1 Terms related to circularity and the circular economy .2
3.2 Terms related to system, boundary and scope .2
3.3 Terms related to measurement and assessment .3
4 Principles of measuring and assessing circularity . 6
4.1 Circular economy principles .6
4.2 Circularity measurement and assessment principles .6
4.2.1 General .6
4.2.2 Ensure relevant boundaries .6
4.2.3 Ensure meaningful outcome .
...
ISO/FDIS 59020:2023(E)
ISO/TC 323/WG 3
Secretariat: NEN AFNOR
Date: 2024-02-02
Circular Economy economy — Measuring and assessing circularity
performance
FDIS stage
---------------------- Page: 1 ----------------------
ISO/FDIS 59020:2024(en)
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication
may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying,
or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO
at the address below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
E-mail: copyright@iso.org
Website: www.iso.org
Published in Switzerland
© ISO 2024 – All rights reserved
ii
---------------------- Page: 2 ----------------------
ISO/FDIS 59020:2024(en)
Contents
Foreword . viii
Introduction. ix
1 Scope .1
2 Normative references .1
3 Terms and definitions .1
3.1 Terms related to circularity and the circular economy .1
3.2 Terms related to system, boundary and scope .2
3.3 Terms related to measurement and assessment .3
4 Principles of measuring and assessing circularity .6
4.1 Circular economy principles .6
4.2 Circularity measurement and assessment principles .7
4.2.1 General .7
4.2.2 Ensure relevant boundaries .7
4.2.3 Ensure meaningful outcome .7
5 Framework for measuring and assessing circularity .7
5.1 Framework introduction .7
5.2 Context of the application .9
5.3 Stage 1: Boundary setting .9
5.4 Stage 2: Circularity measurement and data acquisition .9
5.5 Stage 3: Circularity assessment and reporting . 10
6 Boundary setting . 11
6.1 System to be measured .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.