ISO 13584-25:2004

INTERNATIONAL ISO
STANDARD 13584-25
First edition
2004-06-15
Industrial automation systems and
integration — Parts library —
Part 25:
Logical resource: Logical model of
supplier library with aggregate values
and explicit content
Systèmes d'automatisation industrielle et intégration — Bibliothèque de
composants —
Partie 25: Ressource logique: Modèle logique de fournisseur avec des
valeurs d'ensemble et un contenu explicite

Reference number
©
ISO 2004
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2004
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2004 – All rights reserved

Page
Contents
1 Scope. 1
2 Normative references. 1
3 Terms, definitions and abbreviations . 2
4 Structure of ISO 13584-25 . 7
4.1 Generic resources . 7
4.1.1 ISO13584_IEC61360_dictionary_aggregate_extension_schema. 7
4.1.2 ISO13584_aggregate_value_schema. 7
4.2 Library integrated model. 7
4.2.1 Conformance class 1: minimal dictionaries . 8
4.2.2 Conformance class 2: dictionaries of items classes . 8
4.2.3 Conformance class 3: complete dictionaries . 9
4.2.4 Conformance class 4: complete dictionaries with limited nested aggregate values . 9
4.2.5 Conformance class 5: libraries of item classes. 9
4.2.6 Conformance class 6: complete libraries. 9
4.2.7 Conformance class 7: complete libraries with limited nested aggregate values . 9
4.2.8 Conformance class 10: library instances. 9
4.2.9 Conformance class 11: library instances with asociated dictionary definitions .10
5 Fundamental concepts and assumptions .10
5.1 Aggregate-structured value of properties.10
5.2 Explicit description of a class extension .10
6 ISO13584_IEC61360_dictionary_aggregate_extension_schema .10
6.1 Introduction to the ISO13584_IEC61360_dictionary_aggregate_extension_schema.11
6.2 ISO13584_IEC61360_dictionary_aggregate_extension_schema entity definitions.11
6.2.1 Aggregate_entity_instance_type .11
6.2.2 Aggregate_type.12
6.2.3 List_type .12
6.2.4 Set_type.13
6.2.5 Bag_type.13
6.2.6 Array_type.14
6.2.7 Set_with_subset_constraint_type.14
7 ISO13584_aggregate_value_schema .15
7.1 Introduction to the ISO13584_aggregate_value_schema .16
7.2 ISO13584_aggregate_value_schema entity definitions.16
7.2.1 Aggregate_entity_instance_value.16
7.2.2 Aggregate_value.17
7.2.3 List_value .17
7.2.4 Set_value.17
7.2.5 Bag_value.18
7.2.6 Array_value.18
7.2.7 Set_with_subset_constraint_value.19
7.3 ISO13584 _ aggregate_value_schema rule definition .20
7.3.1 Allowed_aggregate_values rule .20
7.4 ISO13584_ aggregatevalue_schema function definitions .20
7.4.1 Compatible_complete_types_and_value function .20
7.4.2 Compatible_aggregate_domain_and_aggregate_value function.21
7.4.3 Data_type_final_type function.22
7.4.4 Compatible_aggregate_type_and_value function.23
7.4.5 Compatible_final_type_and_value function.28
8 Library integrated information model 25.31
8.1 ISO13584_25_IEC61360_5_liim_schema short listing .32
8.2 Conformance class requirements .38
8.2.1 Conformance class 1: minimal dictionaries .38
8.2.2 Conformance class 2: dictionaries of items classes .40
8.2.3 Conformance class 3: complete dictionaries .42
8.2.4 Conformance class 4: complete dictionaries with limited nested aggregate values .43
8.2.5 Conformance class 5: libraries of item classes.43
8.2.6 Conformance class 6: complete libraries.45
8.2.7 Conformance class 7: complete libraries with limited nested aggregate values .46
8.2.8 Conformance class 10: library instances.46
8.2.9 Conformance class 11: library instances with asociated dictionary definitions .48
Annex A (normative) Short names of entities defined in this part .52
Annex B (normative) Information object registration.53
B.1 Document identification.53
B.2 Schema identification .53
B.2.1 ISO13584_IEC61360_dictionary_aggregate_extension_schema .53
B.2.2 ISO13584_aggregate_value_schema.53
B.3.2 ISO13584_25_IEC61360_5_liim_schema .53
Annex C (normative) ISO13584_25_IEC61360_5_library_implicit_schema expanded listing .54
Annex D (normative) Standard data requirements for library integrated information model 25.56
D.1 Constraints on a library delivery file for referencing library integrated information model 25.56
D.2 Conformance class specification table.57
D.3 Standard data for conformance class 2 to 7 and 10 to 11 (all the conformance classes but
conformance class 1).57
D.3.1 Allowed_reference_to_LIIM_25_rule rule.58
D.3.2 Allowed_entity_instance_type_in_LIIM_25_rule rule.60
D.3.3 Allowed_language_assignement_rule rule.62
D.3.4 Compliant_http_protocol_25 function.62
D.3.5 Compliant_8859_1_protocol_25 function.63
D.3.6 Compliant_external_file_protocol_25 function.64
D.3.7 Is_correct_liim_25_application_value function .65
D.4 Additional constraint for conformance classes 4 and 7.66
D.4.1. nesting_level_aggregate_limit_rule rule.66
D.4.2. no_more_than_two_nested_levels function .67
Annex E (normative) Implementation method specific requirements for the library integrated information
model 25 .68
Annex F (informative) EXPRESS-G diagrams .69
Annex G (informative) Commented example of library integrated information model 25 physical files.
Exchange of explicit general models .72
G.1 Capturing a parts family in ISO 13584.72
G.2 Description of the PAW parts family .73
G.2.1 Dictionary description: the BSU mechanism.74
G.2.2 Dictionary description: the dictionary element definition.74
G.2.3 Library specification: description of the class extension.75
G.3 A complete physical file for explicit general models.76
Annex H (informative) Commented example of library integrated information model 25 physical files.
Exchange of explicit functional models compliant with ISO 13584-101.80
H.1 Description of the PAW parts family and its geometry .80
H.1.1 Dictionary description.80
iv © ISO 2004 – All rights reserved

H.2. Description of geometric representations for the PAW parts family.81

H.3. Library specification of the functional model class .82
H.4 A complete physical file for explicit functional models compliant with ISO 13584-101.84
Index.95

Figures
Figure F.1 — ISO13584_IEC61630_dictionary_aggregate_extension_schema diagram 1 of 1.70
Figure F.2 — ISO13584_aggregate_value_schema diagram 1 of 1.71

Figure G.1 — PAW family description .72
Figure G.2 — Instance of a dictionary de
...