iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
IEC

IEC 60309-1:2021/COR1:2023

(Corrigendum)

Corrigendum 1 - Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes - Part 1: General requirements

Corrigendum 1 - Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes - Part 1: General requirements

Corrigendum 1 - Fiches, socles fixes de prise de courant, prises mobiles et socles de connecteur pour usages industriels - Partie 1: Exigences générales

General Information

Status
Published
Publication Date
16-May-2023
ICS
29.120.30 - Plugs, socket-outlets, couplers
Technical Committee
SC 23H - Plugs, Socket-outlets and Couplers for industrial and similar applications, and for Electric Vehicles
Drafting Committee
MT 7 - TC 23/SC 23H/MT 7
Current Stage
PPUB - Publication issued
Start Date
30-Jun-2023
Completion Date
17-May-2023
Ref Project

Relations

Corrects
IEC 60309-1:2021 - Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes - Part 1: General requirements
Effective Date
05-Sep-2023

Buy Standard

IEC 60309-1:2021/COR1:2023 - Corrigendum 1 - Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes - Part 1: General requirements Released:5/17/2023IEC 60309-1:2021/COR1:2023 - Corrigendum 1 - Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes - Part 1: General requirements Released:5/17/2023
PreviousNext
Standard
IEC 60309-1:2021/COR1:2023 - Corrigendum 1 - Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes - Part 1: General requirements Released:5/17/2023
English and French language
1 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


 IEC 2023
INTERNATIONAL ELECTROTECHNICAL COMMISSION
COMMISSION ÉLECTROTECHNIQUE INTERNATIONALE
____________
IEC 60309-1 IEC 60309-1
Edition 5.0  2021-06 Édition 5.0  2021-06

Plugs, fixed or portable socket-outlets and Fiches, socles fixes de prise de courant, prises
appliance inlets for industrial purposes – Part 1: mobiles et socles de connecteur pour usages
General requirements industriels – Partie 1: Exigences générales

CO RRI G E NDUM 1
10.2 10.2
Replace, in the existing fifth paragraph, i.e., Remplacer, dans le cinquième alinéa
existant, c'est-à-dire,
"A current of 2 A derived from an AC source "Un courant de 2 A fourni par une source de
having a no-load voltage not exceeding courant alternatif dont la tension à v
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

IEC
IEC PAS 63472:2023(Main)
Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Dimensional compatibility description for configuration FF AC/DC contact-tube vehicle coupler

IEC PAS 63472:2023 describes dimensional options for CONFIGURATION FF AC/DC contact-tube vehicle couplers as defined in IEC 62196-3. These possibilities serve to improve the reliability of a mated connection when the charging cable is not axially constrained. The options can be implemented optionally and maintain mating compatibility with CONFIGURATION FF according to IEC 62196-3.

  • Technical specification
    12 pages
    English language
    sale 15% off
IEC
IEC PAS 63454:2022(Main)
Conductive charging of electric vehicles - DC vehicle coupler configuration GG

IEC PAS 63454:2022 is applicable to vehicle couplers with pins and contact-tubes of standardized configuration (GG), herein also referred to as "accessories", intended for use in electric vehicle conductive charging systems which incorporate control means, with rated operating voltage and current in accordance with IEC 62196-1:2022.

  • Technical specification
    20 pages
    English language
    sale 15% off
IEC
IEC 62196-2:2022(Main)
Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility requirements for AC pin and contact-tube accessories

IEC 62196-2:2022 applies to EV plugs, EV socket-outlets, vehicle connectors and vehicle inlets with pins and contact-tubes of standardized configurations, herein referred to as accessories. These accessories have a nominal rated operating voltage not exceeding 480 V AC, 50 Hz to 60 Hz, and a rated current not exceeding 63 A three phase or 70 A single phase, for use in conductive charging of electric vehicles.
This document covers the basic interface accessories for vehicle supply as specified in IEC 62196-1.
This third edition cancels and replaces the second edition published in 2016. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
interchangeability requirements have been removed from the title of Part 2;
alignment with IEC 62196-1:2022 and IEC 62196-3:2022;
alignment with IEC 61851-1:2017.

  • Standard
    134 pages
    English and French language
    sale 15% off
IEC
IEC 62196-3:2022(Main)
Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3: Dimensional compatibility requirements for DC and AC/DC pin and contact-tube vehicle couplers

IEC 62196-3:2022 is applicable to vehicle couplers with pins and contact tubes of standardized configuration, herein also referred to as "accessories", intended for use in electric vehicle conductive charging systems which incorporate control means, with rated operating voltage and current in accordance with IEC 62196-1:2022.
This second edition cancels and replaces the first edition published in 2014. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
interchangeability requirements have been removed from the title of Part 3;
increased ratings for all configurations;
reference to new tests in IEC 62196-1 (Clauses 34, 35, 36 and 37).

  • Standard
    132 pages
    English and French language
    sale 15% off
IEC
IEC TS 62196-4:2022(Main)
Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 4: Dimensional compatibility and interchangeability requirements for DC pin and contact-tube accessories for Class II or Class III applications

IEC TS 62196-4:2022(E) is applicable to plugs, socket-outlets, vehicle connectors and vehicle inlets, herein referred to as “accessories”, of standardized configuration for DC power supply of electric road vehicles, where the protection against electric shocks relies on double or reinforced insulation between all AC and DC inputs and outputs of the EV supply equipment, intended for use in conductive power supply systems which can incorporate control means, with a maximum operating voltage up to 120 V DC, not exceeding 60 A.

  • Technical specification
    56 pages
    English language
    sale 15% off
IEC
IEC 62196-1:2022(Main)
Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements

IEC 62196-1:2022 is applicable to EV plugs, EV socket-outlets, vehicle connectors, vehicle inlets, herein referred to as "accessories", and to cable assemblies for electric vehicles (EV) intended for use in conductive charging systems which incorporate control means, with a rated operating voltage not exceeding:
690 V AC 50 Hz to 60 Hz, at a rated current not exceeding 250 A;
1 500 V DC at a rated current not exceeding 800 A.
This fourth edition cancels and replaces the third edition published in 2014. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
deletion of references to universal AC and DC interfaces;
additional requirements for contact materials and plating;
changes to the temperature rise test to include additional points of measurement;
additional tests for accessories to address thermal stresses and stability, mechanical wear and abuse, and exposure to contaminants;
relocation of information and requirements for DC charging to IEC 62196-3.

  • Standard
    125 pages
    English language
    sale 15% off
  • Standard
    192 pages
    English and French language
    sale 15% off
IEC
IEC 62196-6:2022(Main)
Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 6: Dimensional compatibility requirements for DC pin and contact-tube vehicle couplers intended to be used for DC EV supply equipment where protection relies on electrical separation

IEC 62196-6:2022 is applicable to vehicle connectors, vehicle inlets and cable assemblies for electric vehicle (EV), intended for use in conductive charging systems which incorporate control means, with a rated operating voltage up to 120 V DC and rated current up to 100 A.
These accessories are intended to be used for a DC interface of the conductive charging system according to IEC 61851-25:2020.

  • Standard
    53 pages
    English and French language
    sale 15% off
IEC
IEC 60309-1:2021(Main)
Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes - Part 1: General requirements

IEC 60309-1:2021 applies to plugs, fixed or portable socket-outlets and appliance inlets hereinafter referred to as accessories, with a rated operating voltage not exceeding 1 000 V DC or 1 000 V AC with a frequency not exceeding 500 Hz and a rated current not exceeding 800 A, primarily intended for industrial use, either indoors or outdoors.
This fifth edition cancels and replaces the fourth edition published in 1999, Amendment 1:2005 and Amendment 2:2012. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
addition of classification, requirements and tests for accessories with shutters;
additional marking to indicate neutral terminal and/or earthing terminal;
replacement of the term "connector" by the term "portable socket-outlet".
The contents of the corrigendum of May 2023 have been included in this copy.

  • Standard
    185 pages
    English and French language
    sale 15% off
IEC
IEC 60309-4:2021(Main)
Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes - Part 4: Switched socket-outlets with or without interlock

IEC 60309-4:2021 applies to self-contained products primarily intended for industrial use, either indoors or outdoors that combine the following items within a single enclosure:
– a fixed or portable socket-outlet according to IEC 60309-1 or IEC 60309-2 with a rated operating voltage not exceeding 1 000 V DC or 1 000 V AC with a frequency not exceeding 500 Hz and a rated current not exceeding 800 A;
– a switching device.
This second edition cancels and replaces the first edition published in 2006 and Amendment 1:2012. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
– updated in order to take into account the technical revisions to IEC 60309-1 and to IEC 60309-2.
This document is to be read in conjunction with IEC 60309-1:2021 and with IEC 60309‑2:2021.

  • Standard
    45 pages
    English and French language
    sale 15% off
IEC
IEC 60309-2:2021(Main)
Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes - Part 2: Dimensional compatibility requirements for pin and contact-tube accessories

IEC 60309-2:2021 applies to plugs, fixed or portable socket-outlets, and appliance inlets, hereinafter referred to as accessories, with a rated operating voltage not exceeding 1 000 V DC or 1 000 V AC with a frequency not exceeding 500 Hz and a rated current not exceeding 125 A, primarily intended for industrial use, either indoors or outdoors.
This fifth edition cancels and replaces the fourth edition published in 1999, Amendment 1:2005 and Amendment 2:2012. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
addition of requirements and test for non-solid pins;
additional rating IPX9;
additional marking to indicate neutral terminal and/or earthing terminal.
This document is to be read in conjunction with IEC 60309-1:2021.

  • Standard
    149 pages
    English and French language
    sale 15% off