IEC 60747-1:2006/COR1:2008

IEC 60747-1
(Second edition 2006)
Semiconductor devices –
Part 1: General
CORRIGENDUM 1
Page 39
Deletion of Annex B and replacement with the following new Annex B:
Annex B
(informative)
Clause cross-references from first edition of IEC 60747-1 (1983)

New clause Old Old heading (in first edition 1983)
clause
(or publication)
A Chapter I Scope and presentation of IEC publications 747 and 748
Publications 747
A.1 1
A.1 1.1 Scope
A.1 1.2 Presentation
A.2 2 Publications 748
A.2 2.1 Scope
A.2 2.2 Presentation
1 Chapter II Purpose and presentation of publication 747-1
1 1 Purpose
A.3 2 Presentation
A.3 Chapter III Purpose, presentation and requirements on the contents of
publications 747-2, 747-3, etc.
A.1 1 Purpose of each part
A.3 2 Presentation of each part
A.3.1 2.1 Subdivision into chapters
A.3.2 2.2 Subdivision into device sub-categories
A.3.3 3 Requirements on the different chapters of each part
A.3.3.1 3.1 Requirements on Chapter I, General
A.3.3.1 3.1.1 Purpose
A.3.3.3 & A.3.3.4 3.2 Requirements on Chapter II, Terminology and letter symbols
A.3.3.3 & A.3.3.4 3.2.1 Purpose
A.3.3.3 & A.3.3.4 3.2.2 Validity of terms, definitions and letter symbols
A.3.3.4 3.2.3 Letter symbols
A.3.3.5 3.3 Requirements on Chapter III, Essential ratings and characteristics
A.3.3.5 - A.3.3.7 3.3.1 Purpose
A.3.3.8 3.4 Requirements on Chapter IV, Measuring methods
3.4.1 Purpose
A.3.3.8
A.3.3.9 3.5 Requirements on Chapter V, Acceptance and reliability
A.3.3.9 3.5.1 Purpose
Chapter IV Terminology, general
IEC 60050-521
3 1 Introduction
IEC 60050-521 2 Physical terms
IEC 60050-521 3 General terms
New clause Old Old heading (in first edition 1983)
clause
(or publication)
3.1 3.1 Terms related to structure
IEC 60748-20 3.2 Terms related to process
3.1 3.3-3.6 Anode & Cathode terminals
IEC 60050-702 3.7 Concepts referring to elements & circuits
3.2 3.8 Concepts referring to active & passive elements, components or devices
Omitted 3.9 Concepts relating to components
Omitted 4 Types of devices
IEC 60050-521 5 Terms relating to ratings and characteristics
IEC 60050-521 5.1 Currents and voltages
3.2 5.2 Temperatures
3.3 5.3 Thermal characteristics
3.4 & 5.4 Noise
IEC 60050-702
3.5 & 3.6 5.5 Various terms
5.6 Terms characterising the constant value or periodic waveforms of currents
IEC 60050-131
and voltages
IEC 60469-1 6 Pulse terms and definitions
IEC 60050-521 7 Input-to-output pulse switching times, general terms
4 Chapter V Letter symbols, general
4.1 1 Introduction
4.2 2 Letter symbols for currents, voltages and powers
4.2.2 2.1 Basic letters
4.2.3 - 4.2.7 2.2 Subscripts
Omitted 2.3 Summary chart for current, voltage and power letter symbols
4.2.1 2.4 Example of the application of the rules to a periodic quantity
4.2.8 2.5 Indication of the polarity of currents and voltages
4.4 3 Letter symbols for electrical parameters
3.1 Definition
4.4
4.4.1- 4.4.3 3.2 Basic letters
4.4.4 & 4.4.5 3.3 Subscripts
4.4.2 3.4 Distinction between real and imaginary parts
4.5 4 Letter symbols for other quantities
Omitted 4.1 General
4.5.1 & 4.5.2 4.2 Times, durations
4.5.3 & 4.5.4 4.3 Thermal characteristics and related temperatures
4.5.1 4.4 Frequencies
4.5.5 4.5 Sundry quantities
4.3 5 Letter symbols for logarithmic scale units for signal ratios expressed in dB
4.3 5.1 Power ratio
4.3 5.2 Voltage ratio (or current ratio)
5 Chapter VI Essential ratings and characteristics, general

5.1 1 Introduction
5.3 2 Standard format for the presentation of published data
4.6 3 Definitions
4.6.1 3.1 Definition of maximum limit and minimum limit
4.6.3 3.1.1 Algebraic convention
4.6.2 3.1.2 Absolute magnitude convention
5.2.1 3.2 Basic "rating" definitions

----------------------
...