IEC 60839-5-3:2016
(Main)Alarm and electronic security systems - Part 5-3: Alarm transmission systems - Requirements for receiving centre transceiver (RCT)
Alarm and electronic security systems - Part 5-3: Alarm transmission systems - Requirements for receiving centre transceiver (RCT)
IEC 60839-5-3:2016 specifies the minimum equipment requirements for the performance, reliability, resilience, security and safety characteristics of the receiving centre transceiver installed in an ARC and used in alarm transmission systems. The alarm transmission system requirements and classifications are defined within IEC 60839-5-1.
Systèmes d'alarme et de sécurité électroniques - Partie 5-3: Systèmes de transmission d'alarme - Exigences pour les transmetteurs du centre de réception (RCT)
L'IEC 60839-5-3:2016 spécifie les exigences matérielles minimales relatives au fonctionnement, à la fiabilité, à la résilience, à la sécurité et à la sûreté des transmetteurs de centre de réception installés dans un centre de réception d'alarme et utilisés dans les systèmes de transmission d'alarme. Les exigences et les classifications des systèmes de transmission d'alarme sont définies dans l'IEC 60839-5-1.
Alarmni in elektronski varnostni sistemi - 5-3. del: Alarmni prenosni sistemi - Zahteve za oddajnik sprejemnega centra (RCT) (IEC 60839-5-3:2016)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2024
Alarmni in elektronski varnostni sistemi - 5-3. del: Alarmni prenosni sistemi -
Zahteve za oddajnik sprejemnega centra (RCT) (IEC 60839-5-3:2016)
Alarm and electronic security systems - Part 5-3: Alarm transmission systems -
Requirements for receiving centre transceiver (RCT)
Systèmes d'alarme et de sécurité électroniques - Partie 5-3: Systèmes de transmission
d'alarme - Exigences pour les transmetteurs du centre de réception (RCT)
Ta slovenski standard je istoveten z: IEC 60839-5-3:2016
ICS:
13.320 Alarmni in opozorilni sistemi Alarm and warning systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
IEC 60839-5-3 ®
Edition 1.0 2016-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Alarm and electronic security systems –
Part 5-3: Alarm transmission systems – Requirements for receiving centre
transceiver (RCT)
Systèmes d’alarme et de sécurité électroniques –
Partie 5-3: Systèmes de transmission d’alarme – Exigences pour les
transmetteurs du centre de réception (RCT)
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 13.320 ISBN 978-2-8322-3166-1
– 2 – IEC 60839-5-3:2016 © IEC 2016
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references. 7
3 Terms, definitions and abbreviations . 8
3.1 Terms and definitions . 8
3.2 Abbreviations . 8
4 General requirements . 8
4.1 General . 8
4.2 RCT classification . 8
5 Functional requirements . 8
5.1 General . 8
5.2 Access levels . 9
5.3 Uploading and downloading of software . 10
5.4 Storage of parameters and data . 10
5.5 Monitoring and notification of failure of the ATP and ATS . 10
5.6 Interface(s) to the AE(s) . 10
5.7 Fault signalling . 10
5.8 Event recording . 11
5.9 Mode of operation (store-and-forward or pass-through) . 12
5.9.1 General . 12
5.9.2 Store-and-forward operation requirements . 12
5.9.3 Pass-through operation requirements . 12
5.10 Denial of service . 12
5.11 Information security . 12
5.12 Substitution security . 12
5.13 RCT redundancy . 13
5.14 Documentation . 13
5.15 Marking/identification . 13
6 Tests . 13
6.1 General . 13
6.2 Test conditions . 13
6.2.1 Laboratory conditions and tolerance . 13
6.2.2 Mounting . 14
6.2.3 Documentation . 14
6.2.4 Power supply . 14
6.3 Functional tests . 14
6.3.1 General . 14
6.3.2 Access levels . 15
6.3.3 Upload and download of software . 16
6.3.4 Parameter storage . 17
6.3.5 Monitoring and notification of an ATS failure for a single path ATS . 17
6.3.6 Monitoring and notification of an ATS failure for a dual path ATS . 18
6.3.7 Interface(s) to the AE(s) . 18
6.3.8 Fault signalling . 19
6.3.9 Processing of alarm signals . 20
6.3.10 Event recording . 20
6.3.11 Clock resolution and synchronisation . 21
6.3.12 Endurance of the log . 21
6.3.13 Optimising methods of storage of events . 21
6.3.14 User identification for log entries . 22
6.3.15 Mode of operation . 22
6.3.16 Denial of service . 23
6.3.17 Information and substitution security . 23
6.3.18 RCT redundancy . 24
6.3.19 Documentation . 24
Bibliography . 25
Table 1 – Access levels – Logical access to functions . 10
Table 2 – Event recording classification – Events to be recorded . 11
Table 3 – Summary of functional tests . 14
Table 4 – Test of access levels . 15
Table 5 – Test of upload and download of software . 16
Table 6 – Test of parameter storage . 17
Table 7 – Test of interface(s) to the AE(s) . 19
Table 8 – Fault signalling . 19
Table 9 – Test of event recording . 20
Table 10 – Test of clock resolution and synchronisation . 21
Table 11 – Test of log optimisation . 22
Table 12 – Test of user identification logging . 22
Table 13 – Test of mode of operation . 23
Table 14 – Test of RCT redundancy . 24
– 4 – IEC 60839-5-3:2016 © IEC 2016
INTERNATIONAL ELECTRICAL COMMISSION
______________
ALARM AND ELECTRONIC SECURITY SYSTEMS –
Part 5-3: Alarm transmission systems –
Requirements for receiving centre transceiver (RCT)
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60839-5-3 has been prepared by IEC technical committee 79:
Alarm and electronic security systems.
This international standard is based on EN 50136-3:2013.
The text of this standard is based on the following documents:
CDV Report on voting
79/464/CDV 79/515/RVC
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts in the IEC 60839 series, published under the general title Alarm and
electronic security systems, can be found on the IEC website.
The co
...
IEC 60839-5-3 ®
Edition 1.0 2016-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Alarm and electronic security systems –
Part 5-3: Alarm transmission systems – Requirements for receiving centre
transceiver (RCT)
Systèmes d’alarme et de sécurité électroniques –
Partie 5-3: Systèmes de transmission d’alarme – Exigences pour les
transmetteurs du centre de réception (RCT)
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing 20 000 terms and definitions in
Technical Specifications, Technical Reports and other English and French, with equivalent terms in 15 additional
documents. Available for PC, Mac OS, Android Tablets and languages. Also known as the International Electrotechnical
iPad. Vocabulary (IEV) online.
IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a 65 000 electrotechnical terminology entries in English and
variety of criteria (reference number, text, technical French extracted from the Terms and Definitions clause of
committee,…). It also gives information on projects, replaced IEC publications issued since 2002. Some entries have been
and withdrawn publications. collected from earlier publications of IEC TC 37, 77, 86 and
CISPR.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: csc@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.
Catalogue IEC - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
Application autonome pour consulter tous les renseignements
Le premier dictionnaire en ligne de termes électroniques et
bibliographiques sur les Normes internationales,
électriques. Il contient 20 000 termes et définitions en anglais
Spécifications techniques, Rapports techniques et autres
et en français, ainsi que les termes équivalents dans 15
documents de l'IEC. Disponible pour PC, Mac OS, tablettes
langues additionnelles. Egalement appelé Vocabulaire
Android et iPad.
Electrotechnique International (IEV) en ligne.
Recherche de publications IEC - www.iec.ch/searchpub
Glossaire IEC - std.iec.ch/glossary
La recherche avancée permet de trouver des publications IEC 65 000 entrées terminologiques électrotechniques, en anglais
en utilisant différents critères (numéro de référence, texte, et en français, extraites des articles Termes et Définitions des
comité d’études,…). Elle donne aussi des informations sur les publications IEC parues depuis 2002. Plus certaines entrées
projets et les publications remplacées ou retirées. antérieures extraites des publications des CE 37, 77, 86 et
CISPR de l'IEC.
IEC Just Published - webstore.iec.ch/justpublished
Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications IEC. Just
Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur cette
Disponible en ligne et aussi une fois par mois par email. publication ou si vous avez des questions contactez-nous:
csc@iec.ch.
IEC 60839-5-3 ®
Edition 1.0 2016-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Alarm and electronic security systems –
Part 5-3: Alarm transmission systems – Requirements for receiving centre
transceiver (RCT)
Systèmes d’alarme et de sécurité électroniques –
Partie 5-3: Systèmes de transmission d’alarme – Exigences pour les
transmetteurs du centre de réception (RCT)
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 13.320 ISBN 978-2-8322-3166-1
– 2 – IEC 60839-5-3:2016 © IEC 2016
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references. 7
3 Terms, definitions and abbreviations . 8
3.1 Terms and definitions . 8
3.2 Abbreviations . 8
4 General requirements . 8
4.1 General . 8
4.2 RCT classification . 8
5 Functional requirements . 8
5.1 General . 8
5.2 Access levels . 9
5.3 Uploading and downloading of software . 10
5.4 Storage of parameters and data . 10
5.5 Monitoring and notification of failure of the ATP and ATS . 10
5.6 Interface(s) to the AE(s) . 10
5.7 Fault signalling . 10
5.8 Event recording . 11
5.9 Mode of operation (store-and-forward or pass-through) . 12
5.9.1 General . 12
5.9.2 Store-and-forward operation requirements . 12
5.9.3 Pass-through operation requirements . 12
5.10 Denial of service . 12
5.11 Information security . 12
5.12 Substitution security . 12
5.13 RCT redundancy . 13
5.14 Documentation . 13
5.15 Marking/identification . 13
6 Tests . 13
6.1 General . 13
6.2 Test conditions . 13
6.2.1 Laboratory conditions and tolerance . 13
6.2.2 Mounting . 14
6.2.3 Documentation . 14
6.2.4 Power supply . 14
6.3 Functional tests . 14
6.3.1 General . 14
6.3.2 Access levels . 15
6.3.3 Upload and download of software . 16
6.3.4 Parameter storage . 17
6.3.5 Monitoring and notification of an ATS failure for a single path ATS . 17
6.3.6 Monitoring and notification of an ATS failure for a dual path ATS . 18
6.3.7 Interface(s) to the AE(s) . 18
6.3.8 Fault signalling . 19
6.3.9 Processing of alarm signals . 20
6.3.10 Event recording . 20
6.3.11 Clock resolution and synchronisation . 21
6.3.12 Endurance of the log . 21
6.3.13 Optimising methods of storage of events . 21
6.3.14 User identification for log entries . 22
6.3.15 Mode of operation . 22
6.3.16 Denial of service . 23
6.3.17 Information and substitution security . 23
6.3.18 RCT redundancy . 24
6.3.19 Documentation . 24
Bibliography . 25
Table 1 – Access levels – Logical access to functions . 10
Table 2 – Event recording classification – Events to be recorded . 11
Table 3 – Summary of functional tests . 14
Table 4 – Test of access levels . 15
Table 5 – Test of upload and download of software . 16
Table 6 – Test of parameter storage . 17
Table 7 – Test of interface(s) to the AE(s) . 19
Table 8 – Fault signalling . 19
Table 9 – Test of event recording .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.