IEC 62873-1:2017/AMD1:2020
(Amendment)Amendment 1 - Residual current operated circuit-breakers for household and similar use - Part 1: Outline of blocks and modules for residual current device standards
Amendment 1 - Residual current operated circuit-breakers for household and similar use - Part 1: Outline of blocks and modules for residual current device standards
Amendement 1 - Interrupteurs automatiques à courant différentiel résiduel pour usage domestique et analogue - Partie 1: Présentation des blocs et modules pour les normes des dispositifs différentiels résiduels
General Information
Relations
Standards Content (Sample)
IEC 62873-1 ®
Edition 1.0 2020-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
A MENDMENT 1
AM ENDEMENT 1
Residual current operated circuit-breakers for household and similar use –
Part 1: Outline of blocks and modules for residual current device standards
Interrupteurs automatiques à courant différentiel résiduel pour usage
domestique et analogue –
Partie 1: Présentation des blocs et modules pour les normes des dispositifs
différentiels résiduels
IEC 62873-1:2017-01/AMD1:2020-11(en-fr)
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and definitions clause of
IEC publications issued between 2002 and 2015. Some
IEC Customer Service Centre - webstore.iec.ch/csc entries have been collected from earlier publications of IEC
If you wish to give us your feedback on this publication or TC 37, 77, 86 and CISPR.
need further assistance, please contact the Customer Service
Centre: sales@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.
Recherche de publications IEC - Electropedia - www.electropedia.org
webstore.iec.ch/advsearchform Le premier dictionnaire d'électrotechnologie en ligne au
La recherche avancée permet de trouver des publications IEC monde, avec plus de 22 000 articles terminologiques en
en utilisant différents critères (numéro de référence, texte, anglais et en français, ainsi que les termes équivalents dans
comité d’études,…). Elle donne aussi des informations sur les 16 langues additionnelles. Egalement appelé Vocabulaire
projets et les publications remplacées ou retirées. Electrotechnique International (IEV) en ligne.
IEC Just Published - webstore.iec.ch/justpublished Glossaire IEC - std.iec.ch/glossary
Restez informé sur les nouvelles publications IEC. Just 67 000 entrées terminologiques électrotechniques, en anglais
Published détaille les nouvelles publications parues. et en français, extraites des articles Termes et définitions des
Disponible en ligne et une fois par mois par email. publications IEC parues entre 2002 et 2015. Plus certaines
entrées antérieures extraites des publications des CE 37, 77,
Service Clients - webstore.iec.ch/csc 86 et CISPR de l'IEC.
Si vous désirez nous donner des commentaires sur cette
publication ou si vous avez des questions contactez-nous:
sales@iec.ch.
IEC 62873-1 ®
Edition 1.0 2020-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
A MENDMENT 1
AM ENDEMENT 1
Residual current operated circuit-breakers for household and similar use –
Part 1: Outline of blocks and modules for residual current device standards
Interrupteurs automatiques à courant différentiel résiduel pour usage
domestique et analogue –
Partie 1: Présentation des blocs et modules pour les normes des dispositifs
différentiels résiduels
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.120.50 ISBN 978-2-8322-9024-8
– 2 – IEC 62873-1:2017/AMD1:2020
IEC 2020
FOREWORD
This amendment has been prepared by subcommittee 23E: Circuit-breakers and similar
equipment for household use, of IEC technical committee 23: Electrical accessories.
The text of this amendment is based on the following documents:
FDIS Report on voting
23E/1196/FDIS 23E/1202/RVD
Full information on the voting for the approval of this amendment can be found in the report on
voting indicated in the above table.
The committee has decided that the contents of this amendment and the base publication will
remain unchanged until the stability date indicated on the IEC website under
"http://webstore.iec.ch" in the data related to the specific publication. At this date, the
publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
_____________
1 Scope
Add after the second paragraph the following text:
The prepared modules may be used for the preparation of standards other than those for
RCCBs, RCBOs and IEC 60755, provided that the relevance of content of the module is
carefully verified.
IEC 2020
4.2.4 Numbering of documents and edition numbers
Replace the existing Table 1 with the following new Table 1:
Table 1 – Document numbering
Document type Example of document numbering Remarks
Outline document IEC 62873-1 –
Glossary and definitions IEC 62873-2 –
Block EXAMPLE IEC 62873, RESIDUAL
CURRENT OPERATED CIRCUIT-
BREAKERS FOR HOUSEHOLD
IEC 62873-3-X AND SIMILAR USE, IEC 62873-3-1:
Particular requirements for devices
with screwless-type terminals for
external copper conductors
Module EXAMPLE Module 50-1 2019 01
for the module that will be
introduced in 5.1, uploaded to the
Module A0-BB YYYY MM
Collaboration Platform in
January 2019.
Add after the existing Subclause 4.2.5 the following new Subclause 4.2.6:
4.2.6 Modification of a module
When an existing module needs to be revised for any reason, for example:
– modification for alignment with a published standard;
– correction of an editorial error in the module;
– improvement of the technical content of the module.
The proposed modification is introduced in a draft document and the procedure in 4.2.2 is
applied (see Figure 3).
In the event that the comments from National Committees lead to significant modifications, it
may be decided to circulate a new DC. In any case, a revised module cannot be issued in the
library of
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.