iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
IEC

IEC 80601-2-35:2009/COR2:2015

(Corrigendum)

Corrigendum 2 - Medical electrical equipment - Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads or mattresses and intended for heating in medical use

Corrigendum 2 - Medical electrical equipment - Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads or mattresses and intended for heating in medical use

Corrigendum 2 - Appareils électromédicaux - Partie 2-35: Exigences particulières pour la sécurité de base et les performances essentielles des dispositifs de réchauffage utilisant des couvertures, des coussins ou des matelas chauffants et destinés au réchauffage des patients en usage médical

General Information

Status
Replaced
Publication Date
16-Feb-2015
ICS
11.040.01 - Medical equipment in general
11.140 - Hospital equipment
Technical Committee
SC 62D - Particular medical equipment, software, and systems
Current Stage
DELPUB - Deleted Publication
Completion Date
21-Sep-2020
Ref Project

Relations

Replaced By
IEC 60601-2-35:2020 - Medical electrical equipment - Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads and mattresses and intended for heating in medical use
Effective Date
05-Sep-2023
Corrects
IEC 80601-2-35:2009/COR1:2012 - Corrigendum 1 - Medical electrical equipment - Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads or mattresses and intended for heating in medical use
Effective Date
05-Sep-2023
Corrects
IEC 80601-2-35:2009 - Medical electrical equipment - Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads and mattresses and intended for heating in medical use
Effective Date
05-Sep-2023

Buy Standard

IEC 80601-2-35:2009/COR2:2015 - Corrigendum 2 - Medical electrical equipment - Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads or mattresses and intended for heating in medical use Released:2/17/2015IEC 80601-2-35:2009/COR2:2015 - Corrigendum 2 - Medical electrical equipment - Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads or mattresses and intended for heating in medical use Released:2/17/2015
PreviousNext
Standard
IEC 80601-2-35:2009/COR2:2015 - Corrigendum 2 - Medical electrical equipment - Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads or mattresses and intended for heating in medical use Released:2/17/2015
English and French language
10 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


 IEC 2015
INTERNATIONAL ELECTROTECHNICAL COMMISSION

COMMISSION ÉLECTROTECHNIQUE INTERNATIONALE

____________
IEC 80601-2-35 IEC 80601-2-35
Edition 1.0  2009-10 Édition 1.0  2009-10

Medical electrical equipment – Appareils électromédicaux –

Part 2-35: Particular requirements for the basic Partie 2-35: Exigences particulières pour la
safety and essential performance of heating sécurité de base et les performances
devices using blankets, pads or mattresses and essentielles des dispositifs de réchauffage
intended for heating in medical use utilisant des couvertures, des coussins ou des
matelas chauffants et destinés au réchauffage
des patients en usage médical
CO RRI G E NDUM 2
201.3.211 201.3.211
LAGGING MATER
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

IEC
IEC 60601-2-35:2020/AMD1:2023(Amendment)
Amendment 1 - Medical electrical equipment - Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads or mattresses and intended for heating in medical use
  • Standard
    13 pages
    English and French language
    sale 15% off
IEC
IEC 60601-2-35:2020(Main)
Medical electrical equipment - Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads and mattresses and intended for heating in medical use

IEC 60601-2-35:2020 applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of HEATING DEVICES using BLANKETS, PADS or MATTRESSES in medical use, also referred to as ME EQUIPMENT. HEATING DEVICES intended to prewarm a bed are included in the scope of this document.
If a clause or subclause is specifically intended to be applicable to ME EQUIPMENT only, or to ME SYSTEMS only, the title and content of that clause or subclause will say so. If that is not the case, the clause or subclause applies both to ME EQUIPMENT and to ME SYSTEMS, as relevant.
If a clause or subclause is specifically intended to be applicable to a specifically defined type of ME EQUIPMENT, as is the case with FORCED AIR DEVICES, then the title and content of that clause or subclause will say so. If that is not the case, the clause or subclause applies both to ME EQUIPMENT and to ME SYSTEMS, as relevant.
HAZARDS inherent in the intended physiological function of ME EQUIPMENT or ME SYSTEMS within the scope of this document are not covered by specific requirements in this document, except in 7.2.13 and 8.4.1 of the general standard.
IEC 60601-2-35:2020 does not apply to:
- HEATING DEVICES intended for physiotherapy;
- INFANT RADIANT WARMERS; for information, see IEC 60601-2-21;
- INFANT INCUBATORS; for information, see IEC 60601-2-19;
- INFANT TRANSPORT INCUBATORS, for information, see IEC 60601-2-20;
- cooling devices.
IEC 60601-2-35:2020 cancels and replaces IEC 80601-2-35 published in 2009 and Amendment 1:2016. This edition constitutes a technical revision.
IEC 60601-2-35:2020 includes the following significant technical change with respect to the previous edition: re-dating of normative references.

  • Standard
    70 pages
    English language
    sale 15% off
  • Standard
    143 pages
    English and French language
    sale 15% off
  • Standard
    287 pages
    English and French language
    sale 15% off
IEC
IEC 60601-2-35:2020/AMD1:2023(Amendment)
Amendment 1 - Medical electrical equipment - Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads or mattresses and intended for heating in medical use
  • Standard
    13 pages
    English and French language
    sale 15% off
IEC
IEC 60601-2-35:2020(Main)
Medical electrical equipment - Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads and mattresses and intended for heating in medical use

IEC 60601-2-35:2020 applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of HEATING DEVICES using BLANKETS, PADS or MATTRESSES in medical use, also referred to as ME EQUIPMENT. HEATING DEVICES intended to prewarm a bed are included in the scope of this document.
If a clause or subclause is specifically intended to be applicable to ME EQUIPMENT only, or to ME SYSTEMS only, the title and content of that clause or subclause will say so. If that is not the case, the clause or subclause applies both to ME EQUIPMENT and to ME SYSTEMS, as relevant.
If a clause or subclause is specifically intended to be applicable to a specifically defined type of ME EQUIPMENT, as is the case with FORCED AIR DEVICES, then the title and content of that clause or subclause will say so. If that is not the case, the clause or subclause applies both to ME EQUIPMENT and to ME SYSTEMS, as relevant.
HAZARDS inherent in the intended physiological function of ME EQUIPMENT or ME SYSTEMS within the scope of this document are not covered by specific requirements in this document, except in 7.2.13 and 8.4.1 of the general standard.
IEC 60601-2-35:2020 does not apply to:
- HEATING DEVICES intended for physiotherapy;
- INFANT RADIANT WARMERS; for information, see IEC 60601-2-21;
- INFANT INCUBATORS; for information, see IEC 60601-2-19;
- INFANT TRANSPORT INCUBATORS, for information, see IEC 60601-2-20;
- cooling devices.
IEC 60601-2-35:2020 cancels and replaces IEC 80601-2-35 published in 2009 and Amendment 1:2016. This edition constitutes a technical revision.
IEC 60601-2-35:2020 includes the following significant technical change with respect to the previous edition: re-dating of normative references.

  • Standard
    70 pages
    English language
    sale 15% off
  • Standard
    143 pages
    English and French language
    sale 15% off
  • Standard
    287 pages
    English and French language
    sale 15% off
IEC
IEC 61557-10:2024(Main)
Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 10: Combined measuring equipment

This part of IEC 61557 specifies the requirements for measuring equipment that combines several measuring functions or methods of testing, measuring or monitoring, that are in accordance with the respective parts of IEC 61557, into one piece of apparatus.
Measuring equipment which combines measuring functions or methods of testing, measuring or monitoring covered by the respective parts of IEC 61557 with those not covered by the respective parts of IEC 61557 is also within the scope of this document.

  • Standard
    29 pages
    English language
    sale 15% off
IEC
IEC 63391:2024(Main)
Active millimetre-wave systems for security screening of humans - General requirements

IEC 63391:2024 applies to security screening systems that utilize active millimetre-wave (MMW) imaging to inspect persons who are not inside vehicles, containers, or enclosures. Specifically, this document applies to systems used to detect objects carried on the body of the individual being screened at a security checkpoint. This document applies to systems that screen people using radiation in the range between 3 GHz and 150 GHz (100 mm to 2 mm).
This document specifies the technical requirements, test methods, and signage of the active MMW systems for security screening of humans.
This document does not specify minimum or baseline requirements of image quality, automated threat recognition (ATR) performance, nor does it specify a minimum detection time

  • Standard
    22 pages
    English language
    sale 15% off
IEC
IEC 62341-6-7:2024(Main)
Organic light emitting diode (OLED) displays - Part 6-7: Measuring methods of optical characteristics for display with under-screen feature

IEC 62341-6-7:2024 specifies the standard measuring conditions and measuring methods for determining the optical characteristics of an OLED display with under-screen camera; other under-screen features, such as under-screen fingerprint or under-screen time of flight (TOF) can also be applied. This document applies to OLED displays such as mobile phone, monitor and TV with under-screen features.
NOTE Under-screen feature will want the display to be partially transparent and partially non-transparent, and this can be achieved only by certain types of display technology, for example OLED. This document mainly focuses on OLED display with under-screen feature.

  • Standard
    21 pages
    English language
    sale 15% off
IEC
IEC 63399:2024(Main)
Household and similar electrical rice cookers - Methods for measuring the performance

IEC 63399:2024 applies to household and similar electrical rice cookers.
This document defines the main performance characteristics that are of interest to the user and specifies methods for measuring these characteristics.
This document does not specify the requirements for performance.
This document does not apply to the pressure type rice cooker or the micro-pressure rice cooker.
This document does not apply to rice cookers with the rated volume of rice cooker larger than 8 L.
The pressure type rice cooker refers to a rice cooker that cooks at a pressure more than 40 kPa.
The micro-pressure rice cooker refers to a rice cooker that cooks at a pressure larger than 10 kPa but not more than 40 kPa.
This document does not deal with safety requirements (covered in IEC 60335-2-15).

  • Standard
    68 pages
    English and French language
    sale 15% off
IEC
IEC/IEEE 62582-1:2024(Main)
Nuclear power plants - Instrumentation and control important to safety - Electrical equipment condition monitoring methods - Part 1: General

IEC/IEEE 62582-1:2024 is available as IEC/IEEE 62582-1:2024 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC/IEEE 62582-1:2024 contains requirements for application of the other parts of IEC/IEEE 62582 related to specific methods for condition monitoring in electrical equipment important to safety of nuclear power plants. It also includes requirements which are common to all methods. The procedures defined in IEC/IEEE 62582 are intended for detailed condition monitoring.
IEC/IEEE 62582 specifies condition monitoring methods in sufficient detail to enhance the accuracy and repeatability, and provide standard formats for reporting the results. The methods specified are applicable to electrical equipment containing polymeric materials. Some methods are especially designed for the measurement of condition of a limited range of equipment whilst others can be applied to all types of equipment for which the polymeric parts are accessible.

  • Standard
    21 pages
    English language
    sale 15% off
  • Standard
    21 pages
    English language
    sale 15% off
IEC
IEC/IEEE 63332-387:2024(Main)
Nuclear facilities - Electrical power systems - Diesel generator units applied as standby power sources

IEC/IEEE 63332-387:2024 defines the criteria for the application and testing of diesel generator (DG) units used as safety class standby power supplies in nuclear facilities. In general, the standard applies to new nuclear facilities as well as for upgrading or back-fitting of existing facilities. Existing facilities can voluntarily adopt the requirements to enhance the performance capabilities and reliability of the installed DG units. The standard can be used in applications where highly reliable onsite alternating current (AC) power source is required to maintain plant safety following an event with potential loss of offsite power for an extended duration.
This document provides the principal design criteria, the design features, testing, and qualification requirements for the individual DG units that enable them to meet their functional requirements as a part of the standby power supply under the conditions produced by the design basis events catalogued in the plant safety analysis.

  • Standard
    139 pages
    English and French language
    sale 15% off