IEC TS 62862-1-2:2017

IEC TS 62862-1-2 ®
Edition 1.0 2017-11
TECHNICAL
SPECIFICATION
colour
inside
Solar thermal electric plants –
Part 1-2: General – Creation of annual solar radiation data set for solar thermal
electric (STE) plant simulation
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing 20 000 terms and definitions in
Technical Specifications, Technical Reports and other English and French, with equivalent terms in 16 additional
documents. Available for PC, Mac OS, Android Tablets and languages. Also known as the International Electrotechnical
iPad. Vocabulary (IEV) online.

IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a 65 000 electrotechnical terminology entries in English and
variety of criteria (reference number, text, technical French extracted from the Terms and Definitions clause of
committee,…). It also gives information on projects, replaced IEC publications issued since 2002. Some entries have been
and withdrawn publications. collected from earlier publications of IEC TC 37, 77, 86 and

CISPR.
IEC Just Published - webstore.iec.ch/justpublished

Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: csc@iec.ch.
IEC TS 62862-1-2 ®
Edition 1.0 2017-11
TECHNICAL
SPECIFICATION
colour
inside
Solar thermal electric plants –

Part 1-2: General – Creation of annual solar radiation data set for solar thermal

electric (STE) plant simulation

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 27.160 ISBN 978-2-8322-4978-9

– 2 – IEC TS 62862-1-2:2017 © IEC 2017
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 8
2 Normative references . 8
3 Terms and definitions . 8
4 Elements forming the ASR data set . 9
4.1 Geographic and time identification . 9
4.1.1 Geographic identification . 9
4.1.2 Time reference . 10
4.1.3 Time frequency . 10
4.2 Variables . 10
4.2.1 General . 10
4.2.2 Mandatory variable . 10
4.2.3 Other variables . 10
4.3 Format . 11
5 Procedures and methodology for ASR generation . 11
5.1 General . 11
5.2 Measurement campaign . 12
5.2.1 General . 12
5.2.2 Quality control . 12
5.2.3 Validation and gap filling . 12
5.3 Study of the representative long-term value . 13
5.3.1 General . 13
5.3.2 One source . 13
5.3.3 Several sources . 15
5.4 Generation of the representative series. 17
5.4.1 General . 17
5.4.2 Procedure based on estimates . 17
5.4.3 Procedure based on measurement campaign . 17
6 Report . 18
Annex A (informative) Expression and relationships between formats of types of time . 20
Annex B (informative) General recommendations for measurement stations . 22
Annex C (informative) Equivalence of measurement station locations . 23
Annex D (informative) Quality control of measured data . 24
D.1 General . 24
D.2 Procedure 1: checking for physically possible values . 24
D.3 Procedure 2: checking for extremely rare values . 25
D.4 Procedure 3: checking for coherence of radiation variables . 25
Bibliography . 26

Figure 1 – Sections of ASR generation procedure . 12

Table 1 – Direct solar irradiance place label values . 11
Table 2 – Table format for the estimation of a representative long-term value based on
one data source . 14

Table 3 – Table format for estimating the representative long-term value from several
different data sources . 16
Table D.1 – Quality control procedure 1 – Physically possible values . 24
Table D.2 – Quality control procedure 2 – Extremely rare values . 25
Table D.3 – Quality control procedure 3 – Coherence of variables . 25

– 4 – IEC TS 62862-1-2:2017 © IEC 2017
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
SOLAR THERMAL ELECTRIC PLANTS –

Part 1-2: General – Creation of annual solar radiation data set
for solar thermal electric (STE) plant simulation

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC
Publication(s)"). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and
non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates
closely with the International Organization for Standardization (ISO) in accordance with conditions determined
by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
The main task of IEC technical committees is to prepare International Standards. In
exceptional circumstances, a technical committee may propose the publication of a Technical
Specification when
• the required support cannot be obtained for the publication of an International Standard,
despite repeated efforts, or
• the subject is still under technical development or where, for any other reason, there is the
future but no immediate possibility of an agreement on an International Standard.
Technical Specifications are subject to review within three years of publication to decide
whether they can be transformed into International Standards.
IEC TS 62862-1-2, which is a Technical Specification, has been prepared by IEC technical
committee 117: Solar thermal electric plants.

The text of this Technical Specification is based on the following documents:
Enquiry draft Report on voting
117/67/DTS 117/77/RVDTS
Full information on the voting for the approval of this Technical Specification can be found in
the report on voting indicated in the above table.
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts in the IEC 62862 series, published under the general title Solar thermal
electric plants, can be found on the IEC website.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC website under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• transformed into an International standard,
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at
...