Electrical installations in ships - Part 370: Guidance on the selection of cables for telecommunication and data transfer including radio-frequency cables

IEC TR 60092-370:2019 is available as IEC TR 60092-370:2019 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC TR 60092-370:2019 gives guidance and lays down the basic recommendations for the selection and installation of shipboard and offshore unit cables intended for electrical systems used in both essential and non-essential analogue or digital signal communication, transmission and control networks, including types suitable for high-frequency signals (i.e. signals with a frequency of more than 105 Hz). These cables are not suitable for direct connection to low impedance supplies. Where such cables are required, attention is drawn to IEC 60092-353. Cables intended to have limited circuit integrity (fire resistance) when affected by fire are not covered by this document. Fibre optical cables are not included. Sub-sea or umbilical cables are not included. This second edition cancels and replaces the first edition published in 2009. This edition constitutes a technical revision. This edition includes the following significant technical change with respect to the previous edition: 30 V AC was added in voltage rating for data cables.

General Information

Status
Published
Publication Date
14-Nov-2019
Current Stage
PPUB - Publication issued
Start Date
04-Dec-2019
Completion Date
15-Nov-2019
Ref Project

Relations

Buy Standard

Technical report
IEC TR 60092-370:2019 - Electrical installations in ships - Part 370: Guidance on the selection of cables for telecommunication and data transfer including radio-frequency cables
English language
18 pages
sale 15% off
Preview
sale 15% off
Preview
Technical report
IEC TR 60092-370:2019 RLV - Electrical installations in ships - Part 370: Guidance on the selection of cables for telecommunication and data transfer including radio-frequency cables Released:11/15/2019 Isbn:9782832276334
English language
36 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


IEC TR 60092-370 ®
Edition 2.0 2019-11
TECHNICAL
REPORT
Electrical installations in ships –
Part 370: Guidance on the selection of cables for telecommunication and data
transfer including radio-frequency cables
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and Definitions clause of
IEC publications issued since 2002. Some entries have been
IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and
If you wish to give us your feedback on this publication or CISPR.

need further assistance, please contact the Customer Service

Centre: sales@iec.ch.
IEC TR 60092-370 ®
Edition 2.0 2019-11
TECHNICAL
REPORT
Electrical installations in ships –

Part 370: Guidance on the selection of cables for telecommunication and data

transfer including radio-frequency cables

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 29.060.20; 47.020.60 ISBN 978-2-8322-7596-2

– 2 – IEC TR 60092-370:2019  IEC 2019
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Selection of cables . 6
5 Fundamental considerations . 7
6 Constructional considerations . 7
6.1 Selection of conductor . 7
6.2 Selection of insulation . 7
6.3 Cable elements . 7
6.4 Selection of screen, core screen or shield . 8
6.5 Selection of outer sheath . 8
6.6 Selection of metallic sheath (covering), braid or armour . 8
7 Marking . 8
8 Guidance on the selection of appropriate tests . 9
9 Guide to use . 9
9.1 Purpose . 9
9.2 General . 9
9.3 Voltage rating . 10
9.3.1 Data and telecommunication cables . 10
9.3.2 High-frequency radio communications cables . 10
9.4 Current ratings . 10
9.5 Thermal considerations . 10
9.6 Size of conductors . 10
9.7 Radius of bend . 11
9.8 Tensile stress . 11
9.9 Compression . 11
9.10 Mechanical damage . 11
9.11 Electromagnetic interference. 12
9.12 Terminations . 12
9.13 Joints . 12
10 Performance in a fire . 12
Annex A (informative) Table of tests . 14
Bibliography . 17

Table 1 – Classification of cables by frequency range . 9
Table A.1 – Table of testsfor cables according to the standard IEC 60092-370 . 14

INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
ELECTRICAL INSTALLATIONS IN SHIPS –

Part 370: Guidance on the selection of cables for telecommunication
and data transfer including radio-frequency cables

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
The main task of IEC technical committees is to prepare International Standards. However, a
technical committee may propose the publication of a Technical Report when it has collected
data of a different kind from that which is normally published as an International Standard, for
example "state of the art".
IEC TR 60092-370, which is a Technical Report, has been prepared by subcommittee 18A:
Electric cables for ships and mobile and fixed offshore units, of IEC technical committee 18:
Electrical installations of ships and of mobile and fixed offshore units.
This second edition cancels and replaces the first edition published in 2009. This edition
constitutes a technical revision.
This edition includes the following significant technical change with respect to the previous
edition: 30 V AC was added in voltage rating for data cables.

– 4 – IEC TR 60092-370:2019  IEC 2019
The text of this Technical Report is based on the following documents:
Draft TR Report on voting
18A/421/DTR 18A/422/RVDTR
Full information on the voting for the approval of this Technical Report can be found in the
report on voting indicated in the above table.
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts of the IEC 60092 series, published under the general title Electrical installations
in ships, can be found on the IEC website.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.

INTRODUCTION
IEC 60092 (all parts) concerns electrical installations in sea-going ships, and fixed and mobile
offshore units, incorporating good practice and co-ordinating as far as possible existing rules.
These standards form a code of practical interpretation and amplification of the requirements
of the International Convention on Safety of Life at Sea, a guide for future regulations which
may be prepared and a statement of practice for use by shipowners, shipbuilders, mobile and
fixed offshore units owners and builders and appropriate organisations.
Cables selected for installation on board ships and on offshore installations are usually installed
and are expected to operate in much harsher environments than equivalent land based types.
The risk of mechanical abuse during installation, physical dislocation due to tension and
bending allied with extremes of temperature are examples of the conditions to which these
cables may be subject. If faults occur unlike onshore installations, trained experienced
technicians may not always be readily available to affect a repair or replacement.

– 6 – IEC TR 60092-370:2019  IEC 2019
ELECTRICAL INSTALLATIONS IN SHIPS –

Part 370: Guidance on the selection of cables for telecommunication
and data transfer including radio
...


IEC TR 60092-370 ®
Edition 2.0 2019-11
REDLINE VERSION
TECHNICAL
REPORT
colour
inside
Electrical installations in ships –
Part 370: Guidance on the selection of cables for telecommunication and data
transfer including radio-frequency cables

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and Definitions clause of
IEC publications issued since 2002. Some entries have been
IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and
If you wish to give us your feedback on this publication or CISPR.

need further assistance, please contact the Customer Service

Centre: sales@iec.ch.
IEC TR 60092-370 ®
Edition 2.0 2019-11
REDLINE VERSION
TECHNICAL
REPORT
colour
inside
Electrical installations in ships –

Part 370: Guidance on the selection of cables for telecommunication and data

transfer including radio-frequency cables

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 29.060.20; 47.020.60 ISBN 978-2-8322-7633-4

– 2 – IEC TR 60092-370:2019 RLV  IEC 2019
CONTENTS
FOREWORD . 3
INTRODUCTION . 2
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Selection of cables . 6
5 Fundamental considerations . 7
6 Constructional considerations . 7
6.1 Selection of conductor . 7
6.2 Selection of insulation . 7
6.3 Cable elements . 7
6.4 Selection of screen, core screen or shield . 8
6.5 Selection of outer sheath . 8
6.6 Selection of metallic sheath (covering), braid or armour . 8
7 Marking . 9
8 Guidance on the selection of appropriate tests . 9
9 Guide to use . 9
9.1 Purpose . 9
9.2 General . 10
9.3 Voltage rating . 10
9.3.1 Data and telecommunication cables . 10
9.3.2 High-frequency radio communications cables . 10
9.4 Current ratings . 10
9.5 Thermal considerations . 10
9.6 Size of conductors . 11
9.7 Radius of bend . 11
9.8 Tensile stress . 11
9.9 Compression . 11
9.10 Mechanical damage . 12
9.11 Electromagnetic interference. 12
9.12 Terminations . 12
9.13 Joints . 12
10 Performance in a fire . 12
Annex A (informative) Table of tests . 14
Bibliography . 17

Table 1 – Classification of cables by frequency range . 9
Table A.1 – Table of testsfor cables according to the standard IEC 60092-370 . 14

INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
ELECTRICAL INSTALLATIONS IN SHIPS –

Part 370: Guidance on the selection of cables for telecommunication
and data transfer including radio-frequency cables

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
This redline version of the official IEC Standard allows the user to identify the changes
made to the previous edition. A vertical bar appears in the margin wherever a change has
been made. Additions are in green text, deletions are in strikethrough red text.

– 4 – IEC TR 60092-370:2019 RLV  IEC 2019
The main task of IEC technical committees is to prepare International Standards. However, a
technical committee may propose the publication of a Technical Report when it has collected
data of a different kind from that which is normally published as an International Standard, for
example "state of the art".
IEC TR 60092-370, which is a Technical Report, has been prepared by subcommittee 18A:
Electric cables for ships and mobile and fixed offshore units, of IEC technical committee 18:
Electrical installations of ships and of mobile and fixed offshore units.
This second edition cancels and replaces the first edition published in 2009. This edition
constitutes a technical revision.
This edition includes the following significant technical change with respect to the previous
edition: 30 V AC was added in voltage rating for data cables.
The text of this Technical Report is based on the following documents:
Draft TR Report on voting
18A/421/DTR 18A/422/RVDTR
Full information on the voting for the approval of this Technical Report can be found in the
report on voting indicated in the above table.
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts of the IEC 60092 series, published under the general title Electrical installations
in ships, can be found on the IEC website.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct understanding
of its contents. Users should therefore print this document using a colour printer.

INTRODUCTION
IEC 60092 (all parts) concerns electrical installations in sea-going ships, and fixed and mobile
offshore units, incorporating good practice and co-ordinating as far as possible existing rules.
These standards form a code of practical interpretation and amplification of the requirements
of the International Convention on Safety of Life at Sea, a guide for future regulations which
may be prepared and a statement of practice for use by shipowners, shipbuilders, mobile and
fixed offshore units owners and builders and appropriate organisations.
This IEC/TR 60092-370 has been prepared by the maintenance team MT2 of the IEC
subcommittee 18A.
Cables selected for installation on board ships and on offshore installations are usually installed
and are expected to operate in much hars
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.