Corrigendum 3 - Sleeves of insulating material for live working

Corrigendum 3 - Protège-bras en matériaux isolants pour travaux électriques

General Information

Status: Published
Publication Date: 26-Jan-2005

ICS: 13.260 - Protection against electric shock. Live working
: 29.260.99 - Other electrical equipment for working in special conditions

Technical Committee: TC 78 - Live working

Current Stage: DELPUB - Deleted Publication
Start Date: 28-Jul-2014
Completion Date: 14-Feb-2026

Relations

Corrects: IEC 60984:1990 - Sleeves of insulating material for live working
Effective Date: 05-Sep-2023

Corrects: IEC 60984:1990/COR1:1999 - Corrigendum 1 - Sleeves of insulating material for live working
Effective Date: 05-Sep-2023

Corrects: IEC 60984:1990/COR2:2000 - Corrigendum 2 - Sleeves of insulating material for live working
Effective Date: 05-Sep-2023

Revised: IEC 60984:2014 - Live working - Electrical insulating sleeves
Effective Date: 05-Sep-2023

Buy Documents

IEC 60984:1990/COR3:2005 - Corrigendum 3 - Sleeves of insulating material for live working
Released:1/27/2005 - Page 1 preview

IEC 60984:1990/COR3:2005 - Corrigendum 3 - Sleeves of insulating material for live working
Released:1/27/2005 - Page 2 preview

IEC 60984:1990/COR3:2005 - Corrigendum 3 - Sleeves of insulating material for live working
Released:1/27/2005 - Page 3 preview

Standard

IEC 60984:1990/COR3:2005 - Corrigendum 3 - Sleeves of insulating material for live working Released:1/27/2005

English and French language (10 pages)

sale 15% off

Preview

sale 15% off

Preview

Get Certified

Connect with accredited certification bodies for this standard

Intertek Testing Services NA Inc.

Intertek certification services in North America.

ANAB United States Verified

Visit Website

NSF International

Global independent organization facilitating standards development and certification.

ANAB United States Verified

Visit Website

UL Solutions

Global safety science company with testing, inspection and certification.

ANAB United States Verified

Visit Website

Frequently Asked Questions

What is IEC 60984:1990/COR3:2005?

IEC 60984:1990/COR3:2005 is a standard published by the International Electrotechnical Commission (IEC). Its full title is "Corrigendum 3 - Sleeves of insulating material for live working". This standard covers: Corrigendum 3 - Sleeves of insulating material for live working

What is the scope of IEC 60984:1990/COR3:2005?

Corrigendum 3 - Sleeves of insulating material for live working

What ICS categories does IEC 60984:1990/COR3:2005 belong to?

IEC 60984:1990/COR3:2005 is classified under the following ICS (International Classification for Standards) categories: 13.260 - Protection against electric shock. Live working; 29.260.99 - Other electrical equipment for working in special conditions. The ICS classification helps identify the subject area and facilitates finding related standards.

What standards are related to IEC 60984:1990/COR3:2005?

IEC 60984:1990/COR3:2005 has the following relationships with other standards: It is inter standard links to IEC 60984:1990, IEC 60984:1990/COR1:1999, IEC 60984:1990/COR2:2000, IEC 60984:2014. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

How can I access IEC 60984:1990/COR3:2005?

IEC 60984:1990/COR3:2005 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)

IEC 60984:1990/COR3:2005 - Cor...

CEI 60984 IEC 60984
(Première édition – 1990) (First edition – 1990)

Protège-bras en matériaux isolants pour Sleeves of insulating material for
travaux électriques live working

CORRIGENDUM 3
Page 77
Figure 11 – Montage pour essai de non-propagation de la flamme
Flame retardancy test set-up
Remplacer la figure bilingue existante par les deux figures monolingues suivantes:
Replace the existing bilingual figure by the following tw
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...

IEC

IEC TR 61328:2024(Main)

Live working - Guidelines for the installation of transmission and distribution line conductors and earth wires - Stringing equipment and accessory items

IEC TR 61328:2024 provides information for the selection of conductor stringing, earthing and bonding equipment used for the installation of bare and insulated overhead distribution conductors, as well as overhead transmission conductors and overhead earth wires.
Procedures are given for installation and maintenance of distribution and transmission conductors. A discussion of electric hazards is provided as well as relevant earthing and bonding techniques.

Technical report
59 pages
English language
sale 15% off

IEC

IEC 62819:2022/COR1:2024(Corrigendum)

Corrigendum 1 - Live working - Eye, face and head protectors against the effects of electric arc - Performance requirements and test methods

Standard
2 pages
English and French language
sale 15% off

IEC

IEC 62819:2022(Main)

Live working - Eye, face and head protectors against the effects of electric arc - Performance requirements and test methods

IEC 62819:2022 is applicable to eye, face and head protectors used in work where there is a risk of exposure to an electric arc hazard. Such protectors consist of one or several devices (e.g. hood, goggles, balaclavas, face shields, helmets, etc.), which might need to be combined together in order to give protection to eye, face and head for the intended use. This document covers the performance requirements for protectors and single protective devices considering thermal, optical and mechanical hazards of an electric arc. The product covered by this document can have an impact on the environment during some or all stages of its life cycle. These impacts can range from slight to significant, be short-term or long-term, and occur at the global, regional or local level. This document does not include requirements and test provisions for the manufacturers of the product or recommendations to the users of the product for environmental improvement. However, all parties intervening in its design, manufacture, packaging, distribution, use, maintenance, repair, reuse, recovery and disposal are invited to take account of environmental considerations. Products designed and manufactured in accordance with this document contribute to the safety of the users provided they are used by skilled persons, in accordance with safe methods of work and the instructions for use.
The contents of the corrigendum of March 2024 have been included in this copy.

Standard
99 pages
English and French language
sale 15% off

IEC

IEC 61318:2021(Main)

Live working - Methods for assessment of defects and verification of performance applicable to tools, devices and equipment

IEC 61318:2021 This document defines methods to assess defects and to verify that products after the manufacturer process meet the requirements of the corresponding product standard.
The principles of assessment of defects for live working products are detailed in this document to assist product standard developers in prescribing the best means to achieve suitable quality of every finished tool, device and piece of equipment.
The following elements are not covered by the present document, but are included in each product standard:
– type tests;
– provisions and description for routine, sampling and acceptance tests;
– identification and classification of defects;
– risk analysis.
This document does not cover conformity assessment of commercial shipments or certifications.
This fourth edition cancels and replaces the third edition published in 2007. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) change of the purpose of the document from a prescriptive testing standard to a standard assisting the project team in the conformance to respective product standard.
b) introduction of conformance test, record of process, quality control documentation, adapted to the standard product.
c) change of prescribed sampling procedure to adapted sampling tests to the product standard.
d) suppression of the term “conformity assessment”.
e) Introduction of the term “verification method” replacing “conformity assessment application”.

Standard
33 pages
English and French language
sale 15% off

IEC

IEC 61243-1:2021(Main)

Live working - Voltage detectors - Part 1: Capacitive type to be used for voltages exceeding 1 kV AC

IEC 61243-1:2021 is applicable to portable voltage detectors, with or without built-in power sources, to be used on electrical systems for voltages of 1 kV to 800 kV AC, and frequencies of 50 Hz and/or 60 Hz.
This document applies only to voltage detectors of capacitive type used in contact with the bare part to be tested, as a complete device including its insulating element or as a separate device, adaptable to an insulating stick which, as a separate tool, is not covered by this document (see 4.4.2.1 for general design).
Other types of voltage detectors are not covered by this document.
Self ranging voltage detectors (formally "multi range voltage detectors") are not covered by this document.
Some restrictions or formal interdictions on their use are applicable in case of switchgear of IEC 62271 series design, due to insulation coordination, on overhead line systems of electrified railways (see Annex B) and systems without neutral reference. For systems without neutral reference, the insulating level is adapted to the maximum possible voltage to the earth (ground).
Products designed and manufactured according to this document contribute to the safety of users provided they are used by persons trained for the work, in accordance with the hot stick working method and the instructions for use.
Except where otherwise specified, all the voltages defined in this document refer to values of phase-to-phase voltages of three-phase systems. In other systems, the applicable phase-to-phase or phase-to-earth (ground) voltages are used to determine the operating voltage.
This third edition cancels and replaces the second edition published in 2003 and Amend-ment 1:2009. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) The scope is more precise, stating that only bare contact to the part to be tested is reliable for these contact voltage detectors. The rationale is that tests on painted or coated conductors have led to wrong indications, as this non-conductive paint or coat acts as a capacitor with different capacity according to the thickness. This capacity has an effect on the threshold voltage.
b) A contact probe is introduced as a new type of non-conductive contact electrode.
c) A new type "exclusively outdoor type" has been defined and implemented into the requirements and test procedure.
d) A selector for voltage and frequency is allowed if foreseeable misuse is excluded.
e) The marking for voltage detectors with low interference voltage has been made more precise.
f) The indication groups have been made more precise and requirements and tests for the "ready to operate state" and "stand-by state" added.
g) Requirements and tests for electromagnetic compatability have been implemented.
h) An example for good electrical connection for the tests is introduced.

Standard
160 pages
English and French language
sale 15% off

IEC

IEC 61472-2:2021(Main)

Live working - Minimum approach distances - Part 2: Method of determination of the electrical component distance for AC systems from 1,0 kV to 72,5 kV

IEC 61472-2:2021 specifies a method for determining the electrical component of the minimum approach distances for live working, for AC systems 1 kV up to and including 72,5 kV. This document addresses system overvoltages and the working air distances between equipment and/or workers at different potentials.
The withstand voltage and minimum approach distances determined by the method described in this document can be used only if the following working conditions prevail:
workers are trained for, and skilled in, working live lines or close to live conductors or equipment;
the operating conditions are adjusted so that the statistical overvoltage does not exceed the value selected for the determination of the required withstand voltage;
transient overvoltages are the determining overvoltages;
tool insulation has no continuous film of moisture present on the surface;
no lightning is observed within 10 km of the work site;
allowance is made for the effect of the conducting components of tools.

Standard
32 pages
English and French language
sale 15% off

IEC

IEC 60900:2018/COR2:2020(Corrigendum)

Corrigendum 2 - Live working - Hand tools for use up to 1 000 V AC and 1 500 V DC

Standard
1 page
English and French language
sale 15% off

IEC

IEC 60900:2018/COR1:2019(Corrigendum)

Corrigendum 1 - Live working - Hand tools for use up to 1 000 V AC and 1 500 V DC

Standard
1 page
English and French language
sale 15% off

IEC

IEC 60900:2018(Main)

Live working - Hand tools for use up to 1 000 V AC and 1 500 V DC

IEC 60900:2018 is applicable to insulated, insulating and hybrid hand tools used for working live or close to live parts at nominal voltages up to 1 000 V AC and 1 500 V DC. The products designed and manufactured according to this document contribute to the safety of the users provided they are used by skilled persons, in accordance with safe methods of work and the instructions for use (where appropriate). This document has been prepared in accordance with the requirements of IEC 61477 where applicable. The products covered by this document may have an impact on the environment during some or all stages of its life cycle. These impacts can range from slight to significant, be of short term or long-term duration, and occur at the global, regional or local level. This document does not include requirements and test provisions for the manufacturers of the products, or recommendations to the users of the products for environmental improvement. This fourth edition cancels and replaces the third edition, published in 2012. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) addition of a third category of tools has been added, namely hybrid hand tools;
b) introduction of a new informative Annex A on examples of insulated, insulating and hybrid hand tools.
Key words: Live Working, Insulated, Insulating, Hand Tools
The contents of the corrigendum of January 2019 and May 2020 have been included in this copy.

Standard
180 pages
English language
sale 15% off
Standard
118 pages
English and French language
sale 15% off

IEC

IEC 61057:2017(Main)

Live working - Insulating aerial devices for mounting on a chassis

IEC 61057:2017 is applicable to insulating aerial devices for mounting on a chassis, to be used for live working on electrical installations at nominal voltages above 1 000V r.m.s. AC in the range 45 Hz to 65 Hz and 1 500V DC. This second edition cancels and replaces the first edition published in 1991 and IEC TS 61813:2000. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) general review of the requirements and test provisions;
b) preparation of the elements of evaluation of defects, and general application of IEC 61318:2007;
c) distinguishes between tests for hollow booms and those for foam filled booms;
d) references ISO 16368 for particular mechanical tests;
e) further information on vacuum protection and leakage current monitoring and a mandatory requirement that aerial devices for bare hand work be fitted with a permanently installed lower test electrode system;
f) controls of high electrical resistance;
g) reference to SAE for insulating hydraulic hoses;
h) inclusion of IEC TS 61813 for care, maintenance and in-service testing of aerial devices with insulating booms.

Standard
177 pages
English and French language
sale 15% off

Corrigendum 3 - Sleeves of insulating material for live working

Corrigendum 3 - Protège-bras en matériaux isolants pour travaux électriques

General Information

Relations

Buy Documents

IEC 60984:1990/COR3:2005 - Corrigendum 3 - Sleeves of insulating material for live working Released:1/27/2005

Get Certified

Intertek Testing Services NA Inc.

NSF International

UL Solutions

Frequently Asked Questions

Standards Content (Sample)

Questions, Comments and Discussion

This May Also Interest You