iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
IEC

IEC 60947-4-3:1999/COR1:2000

(Corrigendum)

Corrigendum 1 - Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads

Corrigendum 1 - Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads

Corrigendum 1 - Appareillage à basse tension - Partie 4-3: Contacteurs et démarreurs de moteurs - Gradateurs et contacteurs à semiconducteurs pour charges, autres que des moteurs, à courant alternatif

General Information

Status
Published
Publication Date
10-May-2000
ICS
29.130.20 - Low voltage switchgear and controlgear
31.180 - Printed circuits and boards
Technical Committee
SC 121A - Low-voltage switchgear and controlgear
Current Stage
DELPUB - Deleted Publication
Completion Date
07-May-2014
Ref Project

Relations

Corrects
IEC 60947-4-3:1999 - Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads
Effective Date
05-Sep-2023
Revised
IEC 60947-4-3:2014 - Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads
Effective Date
05-Sep-2023

Buy Standard

IEC 60947-4-3:1999/COR1:2000 - Corrigendum 1 - Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads Released:5/11/2000IEC 60947-4-3:1999/COR1:2000 - Corrigendum 1 - Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads Released:5/11/2000
PreviousNext
Standard
IEC 60947-4-3:1999/COR1:2000 - Corrigendum 1 - Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads Released:5/11/2000
English and French language
10 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


CEI 60947-4-3 IEC 60947-4-3
(Première édition – 1999) (First edition – 1999)
Appareillage à basse tension – Low-voltage switchgear and controlgear –
Partie 4-3 : Contacteurs et démarreurs de Part 4-3: Contactors and motor-starters – AC
moteurs – Gradateurs et contacteurs à semiconductor controllers and contactors
semiconducteurs pour charges, autres que for non-motor loads
des moteurs, à courant a
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

IEC
IEC 60947-4-3:2020(Main)
Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - Semiconductor controllers and semiconductor contactors for non-motor loads

IEC 60947-4-3:2020(E) applies to semiconductor controllers and semiconductor contactors for non-motor load intended to be connected to circuits, the rated voltage of which does not exceed 1 000 V AC.
It covers their use:
– for operations of changing the state of AC electric circuits between the ON-state and the OFF-state;
– with or without bypass switching devices;
– as controller, for reducing the amplitude of the RMS AC voltage.
This third edition cancels and replaces the second edition published in 2014. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) scope exclusions;
b) editorial correction of notes and hanging paragraphs;
c) safety aspects related to:
- general aspects;
- limited energy circuits;
- electronic circuits;
d) mention of dedicated wiring accessories;
e) power consumption measurement;
f) alignment to IEC 60947-1:2020;
g) alignment with IEC 60947-4-2 when appropriate.

  • Standard
    88 pages
    English language
    sale 15% off
IEC
IEC 60947-4-3:2014(Main)
Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads

IEC 60947-4-3:2014 applies to a.c. semiconductor non-motor load controllers and contactors intended for performing electrical operations by changing the state of a.c. electric circuits between the ON-state and the OFF-state. Typical applications are classified by utilization categories given in Table 2. This second edition cancels and replaces the first edition published in 1999, Amendment 1:2006 and Amendment 2:2011. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) Update of the marking requirements (6.1);
b) Update of the EMC requirements (8.3.2); and
c) Update of the tests requirements (9.3.1, 9.4, 9.4.1.1, 9.4.1.2, 9.4.2.1, 9.4.2.2, 9.4.2.3, 9.4.2.4, 9.4.2.6).
This publication is to be read in conjunction with IEC 60947-1:2007.

  • Standard
    159 pages
    English and French language
    sale 15% off
IEC
IEC 60947-4-3:1999(Main)
Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads
  • Standard
    141 pages
    English and French language
    sale 15% off
  • Standard
    165 pages
    English and French language
    sale 15% off
  • Standard
    170 pages
    English and French language
    sale 15% off
IEC
IEC 60947-4-3:2020(Main)
Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - Semiconductor controllers and semiconductor contactors for non-motor loads

IEC 60947-4-3:2020(E) applies to semiconductor controllers and semiconductor contactors for non-motor load intended to be connected to circuits, the rated voltage of which does not exceed 1 000 V AC.
It covers their use:
– for operations of changing the state of AC electric circuits between the ON-state and the OFF-state;
– with or without bypass switching devices;
– as controller, for reducing the amplitude of the RMS AC voltage.
This third edition cancels and replaces the second edition published in 2014. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) scope exclusions;
b) editorial correction of notes and hanging paragraphs;
c) safety aspects related to:
- general aspects;
- limited energy circuits;
- electronic circuits;
d) mention of dedicated wiring accessories;
e) power consumption measurement;
f) alignment to IEC 60947-1:2020;
g) alignment with IEC 60947-4-2 when appropriate.

  • Standard
    88 pages
    English language
    sale 15% off
IEC
IEC 60947-4-3:2014(Main)
Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads

IEC 60947-4-3:2014 applies to a.c. semiconductor non-motor load controllers and contactors intended for performing electrical operations by changing the state of a.c. electric circuits between the ON-state and the OFF-state. Typical applications are classified by utilization categories given in Table 2. This second edition cancels and replaces the first edition published in 1999, Amendment 1:2006 and Amendment 2:2011. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) Update of the marking requirements (6.1);
b) Update of the EMC requirements (8.3.2); and
c) Update of the tests requirements (9.3.1, 9.4, 9.4.1.1, 9.4.1.2, 9.4.2.1, 9.4.2.2, 9.4.2.3, 9.4.2.4, 9.4.2.6).
This publication is to be read in conjunction with IEC 60947-1:2007.

  • Standard
    159 pages
    English and French language
    sale 15% off
IEC
IEC 60947-4-3:1999(Main)
Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads
  • Standard
    141 pages
    English and French language
    sale 15% off
  • Standard
    165 pages
    English and French language
    sale 15% off
  • Standard
    170 pages
    English and French language
    sale 15% off
IEC
IEC/IEEE 62582-1:2024(Main)
Nuclear power plants - Instrumentation and control important to safety - Electrical equipment condition monitoring methods - Part 1: General

IEC/IEEE 62582-1:2024 is available as IEC/IEEE 62582-1:2024 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC/IEEE 62582-1:2024 contains requirements for application of the other parts of IEC/IEEE 62582 related to specific methods for condition monitoring in electrical equipment important to safety of nuclear power plants. It also includes requirements which are common to all methods. The procedures defined in IEC/IEEE 62582 are intended for detailed condition monitoring.
IEC/IEEE 62582 specifies condition monitoring methods in sufficient detail to enhance the accuracy and repeatability, and provide standard formats for reporting the results. The methods specified are applicable to electrical equipment containing polymeric materials. Some methods are especially designed for the measurement of condition of a limited range of equipment whilst others can be applied to all types of equipment for which the polymeric parts are accessible.

  • Standard
    21 pages
    English language
    sale 15% off
  • Standard
    21 pages
    English language
    sale 15% off
IEC
IEC/IEEE 63332-387:2024(Main)
Nuclear facilities - Electrical power systems - Diesel generator units applied as standby power sources

IEC/IEEE 63332-387:2024 defines the criteria for the application and testing of diesel generator (DG) units used as safety class standby power supplies in nuclear facilities. In general, the standard applies to new nuclear facilities as well as for upgrading or back-fitting of existing facilities. Existing facilities can voluntarily adopt the requirements to enhance the performance capabilities and reliability of the installed DG units. The standard can be used in applications where highly reliable onsite alternating current (AC) power source is required to maintain plant safety following an event with potential loss of offsite power for an extended duration.
This document provides the principal design criteria, the design features, testing, and qualification requirements for the individual DG units that enable them to meet their functional requirements as a part of the standby power supply under the conditions produced by the design basis events catalogued in the plant safety analysis.

  • Standard
    139 pages
    English and French language
    sale 15% off
IEC
IEC TR 63368:2024(Main)
Control and protection systems for high-voltage direct current (HVDC) power transmission systems - Off-site real-time simulation testing

IEC TR 63368:2024 provides guidance on off-site real-time simulation tests of control and protection (C&P) systems for HVDC power transmission systems. The off-site real-time simulation tests are carried out after the testing of C&P devices and prior to on-site system tests.
This document covers point-to-point, back-to-back, and multi-terminal HVDC systems of line commutated converters (LCC), voltage-sourced converters (VSC) and hybrid HVDC technologies.
In order to provide practical guidance for the functional performance tests of HVDC power transmission systems, this document covers the test environment, the contents and methods of functional performance tests, and the test report.

  • Technical report
    30 pages
    English language
    sale 15% off
IEC
IEC 62899-301-3:2024(Main)
Printed Electronics - Part 301-3: Equipment - Contact printing - Rigid master - Method to measure the shape errors of printing plate rollers

IEC 62899-301-3:2024 defines measurement terms and methods related to the shape errors of printing plate rollers. Measurement terms include radius, total run-out, and three kinds of shape errors of printing plate rollers that are axial deviation, radial deviation, and cross-sectional deviation. The remaining shape error excluding the three errors mentioned above is defined as a residual shape error.
This document applies to printing plate rollers with or without patterns while excluding the pattern area for the measurement.

  • Standard
    24 pages
    English language
    sale 15% off