iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
IEC

IEC 60939-3:2015/COR1:2016

(Corrigendum)

Corrigendum 1 - Passive filter units for electromagnetic interference suppression - Part 3: Passive filter units for which safety tests are appropriate

Corrigendum 1 - Passive filter units for electromagnetic interference suppression - Part 3: Passive filter units for which safety tests are appropriate

Corrigendum 1 - Filtres passifs d'antiparasitage - Partie 3: Filtres passifs pour lesquels des essais de sécurité sont appropriés

General Information

Status
Published
Publication Date
12-Apr-2016
ICS
31.160 - Electric filters
Technical Committee
TC 40 - Capacitors and resistors for electronic equipment
Current Stage
Ref Project

Relations

Corrects
IEC 60939-3:2015 - Passive filter units for electromagnetic interference suppression - Part 3: Passive filter units for which safety tests are appropriate
Effective Date
05-Sep-2023
Corrected By
IEC 60939-3:2015/COR2:2018 - Corrigendum 2 - Passive filter units for electromagnetic interference suppression - Part 3: Passive filter units for which safety tests are appropriate
Effective Date
05-Sep-2023
Revised
IEC 60939-3:2024 - Passive filter units for electromagnetic interference suppression - Part 3: Passive filter units for which safety tests are appropriate
Effective Date
05-Sep-2023

Buy Standard

IEC 60939-3:2015/COR1:2016 - Corrigendum 1 - Passive filter units for electromagnetic interference suppression - Part 3: Passive filter units for which safety tests are appropriate Released:4/13/2016IEC 60939-3:2015/COR1:2016 - Corrigendum 1 - Passive filter units for electromagnetic interference suppression - Part 3: Passive filter units for which safety tests are appropriate Released:4/13/2016
PreviousNext
Standard
IEC 60939-3:2015/COR1:2016 - Corrigendum 1 - Passive filter units for electromagnetic interference suppression - Part 3: Passive filter units for which safety tests are appropriate Released:4/13/2016
English and French language
10 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


 IEC 2016
INTERNATIONAL ELECTROTECHNICAL COMMISSION

COMMISSION ÉLECTROTECHNIQUE INTERNATIONALE

____________
IEC 60939-3 IEC 60939-3
Edition 1.0  2015-08 Édition 1.0  2015-08

PASSIVE FILTER UNITS FOR FILTRES PASSIFS D'ANTIPARASITAGE –
ELECTROMAGNETIC INTERFERENCE
SUPPRESSION – Partie 3: Filtres passifs pour lesquels des essais
de sécurité sont appropriés
Part 3: Passive filter units for which safety
tests are appropriate
CO RRI G ENDU M 1
4.18.3 Dry heat 4.18.3 Chaleur sèche
Delete the entire second paragraph cited Supprimer la totalité du deuxième alinéa
below: mentionné ci-dessous:
"While still at the specified high "Les filtres étant encore à la température
temperature and at the end of the period élevée spécif
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

IEC
IEC 60939-3:2024(Main)
Passive filter units for electromagnetic interference suppression - Part 3: Passive filter units for which safety tests are appropriate

IEC 60939-3:2024 covers passive filters used to attenuate unwanted radio-frequency signals (such as noise or interference) generated from electromagnetic sources. Both single and multi-channel filters within one enclosure or which are built on a printed circuit board forming a compact entity are included within the scope of this document. This document applies to passive filter units for electromagnetic interference suppression for which safety tests are appropriate. This implies that filters specified according to this document will either be connected to mains supplies, when compliance with the mandatory tests of Table B.1 is necessary, or used in other circuit positions where the equipment specification specifies that some or all of these safety tests are required. This document applies to passive filter units, which will be connected to an AC mains or other supply (DC or AC) with a nominal voltage not exceeding 1 000 V AC, with a nominal frequency not exceeding 400 Hz, or 1 500 V DC. Note: For AC use, IEC 60384-14 applies to capacitors which will be connected to AC mains with a nominal frequency not exceeding 100 Hz. This document covers appliance filters (US) but does not cover facility filters, cord-connected filters or direct plug-in filters. These other filters will be covered by another sectional specification.
This edition includes the following significant technical changes with respect to the previous edition:
a) separated clauses for safety and performance tests;
b) added note for use of multiple X capacitors bridging basic insulation in 3 phase filters;
c) characteristics and conditions to substitute X and Y capacitors are now described in a separate Subclause 4.1;
d) creepage and clearance tables updated and in line with the latest editions of IEC 60938-2 and IEC 60664-1;
e) allowing voltage measurement for inductance measurements (7.3);
f) added requirements for marking depending on remaining energy after disconnection;
g) added content of CTL DSH 2044:2016 for temperature test of IEC filters;
h) added note about temperature rise required specimens for safety testing;
i) changed index of capacitors in Annex A to avoid confusion between index name and capacitor class;
j) moved tests from group 1A to 2. Now, samples in group 1A need to be submitted without potting;
k) revision of all parts of the document has taken place based on the ISO/IEC Directives, Part 2:2021, and harmonization with other similar kinds of documents. Annex X contains all cross-references of changes in clause/subclause numbers.

  • Standard
    251 pages
    English language
    sale 15% off
  • Standard
    162 pages
    English and French language
    sale 15% off
IEC
IEC 60939-2:2005(Main)
Passive filter units for electromagnetic interference suppression - Part 2: Sectional specification - Passive filter units for which safety tests are appropriate - Test methods and general requirements

IEC 60939-2:2005 applies to passive filter units for electromagnetic interference suppression which fall within the scope of the Generic Specification IEC 60939-1. The scope of this Sectional specification is restricted to passive filter units for which safety tests are appropriate. This implies that filters specified according to this Sectional specification will either be connected to mains supplies, when compliance with the mandatory tests of Table 3 is necessary, or used in other circuit positions where the equipment specification prescribes that some or all of these safety tests are required. The contents of the corrigendum of November 2005 have been included in this copy.

  • Standard
    43 pages
    English language
    sale 15% off
  • Standard
    88 pages
    English and French language
    sale 15% off
  • Standard
    183 pages
    English and French language
    sale 15% off
IEC
IEC 60939-2:2005/AMD1:2023(Amendment)
Amendment 1 - Passive filter units for electromagnetic interference suppression - Part 2: Sectional specification - Passive filter units for which safety tests are appropriate - Test methods and general requirements
  • Standard
    13 pages
    English and French language
    sale 15% off
IEC
IEC 60939-3:2015/COR2:2018(Corrigendum)
Corrigendum 2 - Passive filter units for electromagnetic interference suppression - Part 3: Passive filter units for which safety tests are appropriate
  • Standard
    1 page
    English and French language
    sale 15% off
IEC
IEC 60939-3:2015(Main)
Passive filter units for electromagnetic interference suppression - Part 3: Passive filter units for which safety tests are appropriate

IEC 60939-3:2015 covers passive filters used to attenuate unwanted radio-frequency signals (such as noise or interference) generated from electromagnetic sources. Both single and multi-channel filters within one enclosure or which are built on a printed circuit board forming a compact entity are included within the scope of this specification. This specification applies to passive filter units for electromagnetic interference suppression for which safety tests are appropriate. This implies that filters specified according to this specification will either be connected to mains supplies, when compliance with the mandatory tests of Table 3 is necessary, or used in other circuit positions where the equipment specification prescribes that some or all of these safety tests are required. This specification applies to passive filter units, which will be connected to an a.c. mains or other supply (d.c. or a.c.) with a nominal voltage not exceeding 1 000 V a.c., with a nominal frequency not exceeding 400 Hz, or 1 500 V d.c. The contents of the corrigendum of April 2016 and May 2018 have been included in this copy.

  • Standard
    150 pages
    English and French language
    sale 15% off
IEC
IEC 60939-1:2010(Main)
Passive filter units for electromagnetic interference suppression - Part 1: Generic specification

IEC 60939-1:2010 relates to passive filter units for electromagnetic interference suppression for use within, or associated with, electronic or electrical equipment and machines. Both single and multi-channel filters within one enclosure are included within the scope of this generic specification. This generic specification establishes standard terms, inspection procedures and methods of test for use in sectional and detail specifications within the IECQ-CECC system for electronic components. This edition includes the following significant technical changes with respect to the previous edition:
a) table 3 has been updated, specifying how to handle the Neutral by 3-phase filter with Neutral;
b) all details about "Quality assessment" have been deleted in this edition, because this standard is a safety standard;
c) filters shall be subjected to Test Aa of IEC 60068-2-1 for 16 h, using the degree of severity of the lower category temperature as prescribed in the relevant specification;
d) since IEC 60068-2-20 does no longer make a difference between Method 1A and 1B, but only describes Method 1, references to the method to be used are updated.

  • Standard
    68 pages
    English and French language
    sale 15% off
IEC
IEC 60939-2:2005/COR1:2005(Corrigendum)
Corrigendum 1 - Passive filter units for electromagnetic interference suppression - Part 2: Sectional specification: Passive filter units for which safety tests are appropriate - Test methods and general requirements
  • Standard
    10 pages
    English language
    sale 15% off
  • Standard
    12 pages
    English and French language
    sale 15% off
IEC
IEC 60939-1:2005/COR1:2005(Corrigendum)
Corrigendum 1 - Passive filter units for electromagnetic interference suppression - Part 1: Generic specification
  • Standard
    10 pages
    English language
    sale 15% off
IEC
IEC 60939-1:2005(Main)
Passive filter units for electromagnetic interference suppression - Part 1: Generic specification

relates to passive filter units for electromagnetic interference suppression for use within, or associated with, electronic or electrical equipment and machines. Both single- and multi-channel filters within one enclosure are included within the scope of this generic specification. The contents of the corrigendum of November 2005 have been included in this copy.

  • Standard
    31 pages
    English language
    sale 15% off
IEC
IEC 60939-2-1:2004(Main)
Complete filter units for radio interference suppression - Part 2-1: Blank detail specification - Passive filter units for electromagnetic interference suppression - Filters for which safety tests are required (assessment level D/DZ)

is a supplementary document to the sectional specification and contains requirements for style and layout and minimum content of detail specifications. In the preparation of detail specifications, the content of 1.4 of the sectional specification shall be taken into account. The use of IEC 60939-2-2 may be more appropriate for components where approval and requalification tests contribute considerably to the cost of the product, whereas the employment of this specification may be necessary for components manufactured in mass production. This specification offers the assessment levels D and DZ (Zero defect).

  • Standard
    16 pages
    English language
    sale 15% off